Re: [PATCH v2 15/17] drm/gma500: Stop using mode->private_flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ville.

On Fri, Apr 03, 2020 at 11:40:06PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> 
> gma500 only uses mode->private_flags to convey the sdvo pixel
> multiplier from the encoder .mode_fixup() hook to the encoder
> .mode_set() hook. Those always seems get called as a pair so
> let's just stuff the pixel multiplier into the encoder itself
> as there are no state objects we could use in this non-atomic
> driver.
> 
> Paves the way for nuking mode->private_flag.
Nice little clean-up. One comment below.

	Sam
> 
> Cc: Patrik Jakobsson <patrik.r.jakobsson@xxxxxxxxx>
> CC: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Cc: Emil Velikov <emil.l.velikov@xxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/gma500/psb_intel_drv.h  | 19 -------------------
>  drivers/gpu/drm/gma500/psb_intel_sdvo.c | 11 ++++++-----
>  2 files changed, 6 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
> index fb601983cef0..3dd5718c3e31 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_drv.h
> +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
> @@ -56,25 +56,6 @@
>  #define INTEL_OUTPUT_DISPLAYPORT 9
>  #define INTEL_OUTPUT_EDP 10
>  
> -#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
> -#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
> -
> -static inline void
> -psb_intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
> -				int multiplier)
> -{
> -	mode->clock *= multiplier;
> -	mode->private_flags |= multiplier;
> -}
> -
> -static inline int
> -psb_intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
> -{
> -	return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK)
> -	       >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
> -}
> -
> -
>  /*
>   * Hold information useally put on the device driver privates here,
>   * since it needs to be shared across multiple of devices drivers privates.
> diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> index 264d7ad004b4..9e88a37f55e9 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> @@ -132,6 +132,8 @@ struct psb_intel_sdvo {
>  	/* DDC bus used by this SDVO encoder */
>  	uint8_t ddc_bus;
>  
> +	u8 pixel_multiplier;
> +

There is really no good reason to use an u8 here.
psb_intel_sdvo_get_pixel_multiplier() return an int, so use an int here
too.

With this fixed:
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>

>  	/* Input timings for adjusted_mode */
>  	struct psb_intel_sdvo_dtd input_dtd;
>  
> @@ -958,7 +960,6 @@ static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder,
>  				  struct drm_display_mode *adjusted_mode)
>  {
>  	struct psb_intel_sdvo *psb_intel_sdvo = to_psb_intel_sdvo(encoder);
> -	int multiplier;
>  
>  	/* We need to construct preferred input timings based on our
>  	 * output timings.  To do that, we have to set the output
> @@ -985,8 +986,9 @@ static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder,
>  	/* Make the CRTC code factor in the SDVO pixel multiplier.  The
>  	 * SDVO device will factor out the multiplier during mode_set.
>  	 */
> -	multiplier = psb_intel_sdvo_get_pixel_multiplier(adjusted_mode);
> -	psb_intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
> +	psb_intel_sdvo->pixel_multiplier =
> +		psb_intel_sdvo_get_pixel_multiplier(adjusted_mode);
> +	adjusted_mode->clock *= psb_intel_sdvo->pixel_multiplier;
>  
>  	return true;
>  }
> @@ -1002,7 +1004,6 @@ static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder,
>  	u32 sdvox;
>  	struct psb_intel_sdvo_in_out_map in_out;
>  	struct psb_intel_sdvo_dtd input_dtd;
> -	int pixel_multiplier = psb_intel_mode_get_pixel_multiplier(adjusted_mode);
>  	int rate;
>  	int need_aux = IS_MRST(dev) ? 1 : 0;
>  
> @@ -1060,7 +1061,7 @@ static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder,
>  
>  	(void) psb_intel_sdvo_set_input_timing(psb_intel_sdvo, &input_dtd);
>  
> -	switch (pixel_multiplier) {
> +	switch (psb_intel_sdvo->pixel_multiplier) {
>  	default:
>  	case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
>  	case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
> -- 
> 2.24.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux