On Wed, 25 Mar 2020, Rob Herring wrote: > Setting 'additionalProperties: false' is frequently omitted, but is > important in order to check that there aren't extra undocumented > properties in a binding. > > Ideally, we'd just add this automatically and make this the default, but > there's some cases where it doesn't work. For example, if a common > schema is referenced, then properties in the common schema aren't part > of what's considered for 'additionalProperties'. Also, sometimes there > are bus specific properties such as 'spi-max-frequency' that go into > bus child nodes, but aren't defined in the child node's schema. > > So let's stick with the json-schema defined default and add > 'additionalProperties: false' where needed. This will be a continual > review comment and game of wack-a-mole. > > Signed-off-by: Rob Herring <robh@xxxxxxxxxx> > --- > .../devicetree/bindings/arm/altera/socfpga-clk-manager.yaml | 2 ++ > .../bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++ > Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 ++ > Documentation/devicetree/bindings/arm/renesas,prr.yaml | 2 ++ > .../devicetree/bindings/arm/samsung/exynos-chipid.yaml | 2 ++ > Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 ++ > .../bindings/arm/samsung/samsung-secure-firmware.yaml | 2 ++ > .../devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++ > Documentation/devicetree/bindings/clock/fsl,plldig.yaml | 2 ++ > Documentation/devicetree/bindings/clock/imx8mn-clock.yaml | 2 ++ > Documentation/devicetree/bindings/clock/imx8mp-clock.yaml | 2 ++ > Documentation/devicetree/bindings/clock/milbeaut-clock.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,gcc.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++ > .../devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 ++ > .../devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++ > .../devicetree/bindings/clock/qcom,sc7180-videocc.yaml | 2 ++ > .../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++ > Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++ > .../devicetree/bindings/clock/qcom,sdm845-videocc.yaml | 2 ++ > .../devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++ > .../devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++ > Documentation/devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++ > Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++ > .../firmware/intel,ixp4xx-network-processing-engine.yaml | 3 +++ > .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++ > .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++ > Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++ > Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 ++ > Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 ++ > Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 2 ++ > Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 ++ > Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml | 2 ++ > Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 2 ++ > Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++ > Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++ > Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml | 2 ++ > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 ++ > Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 2 ++ > Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 2 ++ > .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 2 ++ > .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++ > .../devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 2 ++ > .../devicetree/bindings/iio/chemical/sensirion,sps30.yaml | 2 ++ > Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 2 ++ > Documentation/devicetree/bindings/iio/light/adux1020.yaml | 2 ++ > Documentation/devicetree/bindings/iio/light/bh1750.yaml | 2 ++ > Documentation/devicetree/bindings/iio/light/isl29018.yaml | 2 ++ > Documentation/devicetree/bindings/iio/light/noa1305.yaml | 2 ++ > Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 2 ++ > Documentation/devicetree/bindings/iio/light/tsl2583.yaml | 2 ++ > Documentation/devicetree/bindings/iio/light/tsl2772.yaml | 2 ++ > Documentation/devicetree/bindings/iio/light/veml6030.yaml | 2 ++ > .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++ > Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 ++ > .../devicetree/bindings/iio/proximity/devantech-srf04.yaml | 2 ++ > .../devicetree/bindings/iio/proximity/parallax-ping.yaml | 2 ++ > .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 2 ++ > Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 2 ++ > Documentation/devicetree/bindings/input/max77650-onkey.yaml | 3 +++ > .../bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml | 2 ++ > Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml | 2 ++ > Documentation/devicetree/bindings/leds/leds-max77650.yaml | 3 +++ > Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml | 3 +++ > .../devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++ > Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++ > .../devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++ > Documentation/devicetree/bindings/media/renesas,ceu.yaml | 2 ++ > Documentation/devicetree/bindings/mfd/max77650.yaml | 2 ++ > Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 2 ++ Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
