On Sun, Mar 15, 2020 at 02:43:43PM +0100, Sam Ravnborg wrote:
> The binding for this panel is a SPI slave.
> Reference spi-slave.yaml
> to avoid duplicating all properties.
>
> Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Jonathan Bakker <xc-racer2@xxxxxxx>
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> .../display/panel/samsung,s6e63m0.txt | 33 -----------
> .../display/panel/samsung,s6e63m0.yaml | 58 +++++++++++++++++++
> 2 files changed, 58 insertions(+), 33 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
> create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
> deleted file mode 100644
> index 9fb9ebeef8e4..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -Samsung s6e63m0 AMOLED LCD panel
> -
> -Required properties:
> - - compatible: "samsung,s6e63m0"
> - - reset-gpios: GPIO spec for reset pin
> - - vdd3-supply: VDD regulator
> - - vci-supply: VCI regulator
> -
> -The panel must obey rules for SPI slave device specified in document [1].
> -
> -The device node can contain one 'port' child node with one child
> -'endpoint' node, according to the bindings defined in [2]. This
> -node should describe panel's video bus.
> -
> -[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
> -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
> -
> -Example:
> -
> - s6e63m0: display@0 {
> - compatible = "samsung,s6e63m0";
> - reg = <0>;
> - reset-gpio = <&mp05 5 1>;
> - vdd3-supply = <&ldo12_reg>;
> - vci-supply = <&ldo11_reg>;
> - spi-max-frequency = <1200000>;
> -
> - port {
> - lcd_ep: endpoint {
> - remote-endpoint = <&fimd_ep>;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
> new file mode 100644
> index 000000000000..204ed76da84d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/samsung,s6e63m0.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung s6e63m0 AMOLED LCD panel
> +
> +maintainers:
> + - Jonathan Bakker <xc-racer2@xxxxxxx>
> +
> +allOf:
> + - $ref: ../../spi/spi-slave.yaml#
> + - $ref: panel-common.yaml#
> +
> +properties:
> + compatible:
> + const: samsung,s6e63m0
> +
> + reg: true
> + reset-gpios: true
> + port: true
> +
> + vdd3-supply:
> + description: VDD regulator
> +
> + vci-supply:
> + description: VCI regulator
> +
> +required:
> + - compatible
> + - reset-gpios
> + - vdd3-supply
> + - vci-supply
Shouldn't port be required? Not really clear in the binding doc, but in
the driver it doesn't look like display data goes over spi.
Rob
> +
> +examples:
> + - |
> + spi {
> + reg = <0xf00 0x20>;
Drop this or do 'spi@f00'. If it doesn't warn with W=1, it's only a
matter of time.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + display@0 {
> + compatible = "samsung,s6e63m0";
> + reg = <0>;
> + reset-gpios = <&mp05 5 1>;
> + vdd3-supply = <&ldo12_reg>;
> + vci-supply = <&ldo11_reg>;
> + spi-max-frequency = <1200000>;
> +
> + port {
> + lcd_ep: endpoint {
> + remote-endpoint = <&fimd_ep>;
> + };
> + };
> + };
> + };
> +
> +...
> --
> 2.20.1
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
