Re: [PATCH v4] drm/i915: Init lspcon after HPD in intel_dp_detect()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Feb 15, 2020, at 01:56, Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> wrote:
> 
> On HP 800 G4 DM, if HDMI cable isn't plugged before boot, the HDMI port
> becomes useless and never responds to cable hotplugging:
> [    3.031904] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
> [    3.031945] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port D
> 
> Seems like the lspcon chip on the system in question only gets powered
> after the cable is plugged.
> 
> So let's call lspcon_init() dynamically to properly initialize the
> lspcon chip and make HDMI port work.
> 
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>

A gentle ping.

> ---
> v4:
> - Trust VBT in intel_infoframe_init().
> - Init lspcon in intel_dp_detect().
> 
> v3:
> - Make sure it's handled under long HPD case.
> 
> v2: 
> - Move lspcon_init() inside of intel_dp_hpd_pulse().
> 
> drivers/gpu/drm/i915/display/intel_ddi.c  | 17 +----------------
> drivers/gpu/drm/i915/display/intel_dp.c   | 13 ++++++++++++-
> drivers/gpu/drm/i915/display/intel_hdmi.c |  2 +-
> 3 files changed, 14 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 33f1dc3d7c1a..ca717434b406 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4741,7 +4741,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
> 		&dev_priv->vbt.ddi_port_info[port];
> 	struct intel_digital_port *intel_dig_port;
> 	struct intel_encoder *encoder;
> -	bool init_hdmi, init_dp, init_lspcon = false;
> +	bool init_hdmi, init_dp;
> 	enum phy phy = intel_port_to_phy(dev_priv, port);
> 
> 	init_hdmi = port_info->supports_dvi || port_info->supports_hdmi;
> @@ -4754,7 +4754,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
> 		 * is initialized before lspcon.
> 		 */
> 		init_dp = true;
> -		init_lspcon = true;
> 		init_hdmi = false;
> 		DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port));
> 	}
> @@ -4833,20 +4832,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
> 			goto err;
> 	}
> 
> -	if (init_lspcon) {
> -		if (lspcon_init(intel_dig_port))
> -			/* TODO: handle hdmi info frame part */
> -			DRM_DEBUG_KMS("LSPCON init success on port %c\n",
> -				port_name(port));
> -		else
> -			/*
> -			 * LSPCON init faied, but DP init was success, so
> -			 * lets try to drive as DP++ port.
> -			 */
> -			DRM_ERROR("LSPCON init failed on port %c\n",
> -				port_name(port));
> -	}
> -
> 	intel_infoframe_init(intel_dig_port);
> 
> 	return;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c7424e2a04a3..43117aa86292 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5663,8 +5663,19 @@ intel_dp_detect(struct drm_connector *connector,
> 	/* Can't disconnect eDP */
> 	if (intel_dp_is_edp(intel_dp))
> 		status = edp_detect(intel_dp);
> -	else if (intel_digital_port_connected(encoder))
> +	else if (intel_digital_port_connected(encoder)) {
> +		if (intel_bios_is_lspcon_present(dev_priv, dig_port->base.port) &&
> +		    !dig_port->lspcon.active) {
> +			if (lspcon_init(dig_port))
> +				DRM_DEBUG_KMS("LSPCON init success on port %c\n",
> +					      port_name(dig_port->base.port));
> +			else
> +				DRM_DEBUG_KMS("LSPCON init failed on port %c\n",
> +					      port_name(dig_port->base.port));
> +		}
> +
> 		status = intel_dp_detect_dpcd(intel_dp);
> +	}
> 	else
> 		status = connector_status_disconnected;
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 93ac0f296852..27a5aa8cefc9 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -3100,7 +3100,7 @@ void intel_infoframe_init(struct intel_digital_port *intel_dig_port)
> 		intel_dig_port->set_infoframes = g4x_set_infoframes;
> 		intel_dig_port->infoframes_enabled = g4x_infoframes_enabled;
> 	} else if (HAS_DDI(dev_priv)) {
> -		if (intel_dig_port->lspcon.active) {
> +		if (intel_bios_is_lspcon_present(dev_priv, intel_dig_port->base.port)) {
> 			intel_dig_port->write_infoframe = lspcon_write_infoframe;
> 			intel_dig_port->read_infoframe = lspcon_read_infoframe;
> 			intel_dig_port->set_infoframes = lspcon_set_infoframes;
> -- 
> 2.17.1
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux