Hi Krishna. Thanks for these bindings files. On Fri, Mar 06, 2020 at 05:06:00PM +0530, Krishna Manikandan wrote: > MSM Mobile Display Subsytem(MDSS) encapsulates sub-blocks > like DPU display controller, DSI etc. Add YAML schema > for the device tree bindings for the same. > > Signed-off-by: Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx> > --- > .../bindings/display/msm/dpu-sc7180.yaml | 269 +++++++++++++++ > .../bindings/display/msm/dpu-sdm845.yaml | 265 +++++++++++++++ > .../bindings/display/msm/dsi-sc7180.yaml | 369 +++++++++++++++++++++ > .../bindings/display/msm/dsi-sdm845.yaml | 369 +++++++++++++++++++++ > 4 files changed, 1272 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml > > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > new file mode 100644 > index 0000000..3d1d9b8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > @@ -0,0 +1,269 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display Dpu dt properties. Try to be cossistent in capitilization of Dpu versus DPU > + > +maintainers: > + - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx> > + > +description: | > + Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree > + bindings of MDSS and DPU are mentioned for SC7180 target. Bindings should use an indent of two spaces. This is what is used in the example schema and the de-facto standard. One space indent makes it very hard to follow the indent. For examples the indent varies. From 2 spaces to 8 spaces. I often use 4 spaces as 2 spaces is not enough when it spans several lines. But there is nothing fixed there. > + > +properties: > + "mdss": > + type: object > + description: | > + Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP > + interfaces. > + > + properties: > + compatible: > + items: > + - const: qcom,sc7180-mdss > + reg: > + description: | > + Physical base address and length of controller's registers. Add empty line between properties (empty line before reg:). > + > + reg-names: > + description: | > + Names for different register regions defined above. The required region > + is mentioned below. > + items: > + - const: mdss > + > + power-domains: > + description: | > + A power domain consumer specifier according to > + Documentation/devicetree/bindings/power/power_domain.txt. Should this be power-domain.yaml? > + > + clocks: > + description: | > + List of clock specifiers for clocks needed by the device. Do not use "|" unless required. Fine to have text on same line as description: . Sam _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
