Hi Heiko. On Tue, Feb 25, 2020 at 10:39:13AM +0100, Heiko Stuebner wrote: > From: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx> > > Panel driver for the KD35T133 display from Elida, used for example > in the rk3326-based Odroid Go Advance handheld. > > changes in v2: > - rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor > the underlying mipi_dsi_dcs_write (Robin) > > Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx> Driver looks good. One small nit. With or without this addressed: Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Until we have the vendor prefix applied I cannot apply the binding and thus this driver. Ping me when we have the vendor prefix applied. Sam > --- > drivers/gpu/drm/panel/Kconfig | 10 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-elida-kd35t133.c | 352 +++++++++++++++++++ > 3 files changed, 363 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-elida-kd35t133.c > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index db7ba062027e..56149fdbdf53 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -50,6 +50,16 @@ config DRM_PANEL_SIMPLE > that it can be automatically turned off when the panel goes into a > low power state. > > +config DRM_PANEL_ELIDA_KD35T133 > + tristate "Elida KD35T133 panel driver" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for the Elida > + KD35T133 controller for 320x480 LCD panels with MIPI-DSI > + system interfaces. > + > config DRM_PANEL_FEIYANG_FY07024DI26A30D > tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 276907410a45..63189c015ba5 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o > obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o > +obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o > obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o > diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c > new file mode 100644 > index 000000000000..424fb3998d2f > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c > @@ -0,0 +1,352 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Elida kd35t133 5.5" MIPI-DSI panel driver > + * Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH > + * > + * based on > + * > + * Rockteck jh057n00900 5.5" MIPI-DSI panel driver > + * Copyright (C) Purism SPC 2019 > + */ > + > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > +#include <drm/drm_print.h> > + > +#include <video/display_timing.h> > +#include <video/mipi_display.h> > + > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/media-bus-format.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/regulator/consumer.h> We usually order this: #include <linux/*> #include <video/*> #include <drm/*> And sorted within each block as you already did. > + > +/* Manufacturer specific Commands send via DSI */ > +#define KD35T133_CMD_INTERFACEMODECTRL 0xb0 > +#define KD35T133_CMD_FRAMERATECTRL 0xb1 > +#define KD35T133_CMD_DISPLAYINVERSIONCTRL 0xb4 > +#define KD35T133_CMD_DISPLAYFUNCTIONCTRL 0xb6 > +#define KD35T133_CMD_POWERCONTROL1 0xc0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
