Config dpi pins mode to output and pull low when dpi is disabled. Aovid leakage current from some dpi pins (Hsync Vsync DE ... ). Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx> --- drivers/gpu/drm/mediatek/mtk_dpi.c | 44 ++++++++++++++++++++++++++++-- 1 file changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index db3272f7a4c4..fece8661d8b6 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -10,7 +10,9 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/of_graph.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/types.h> @@ -74,6 +76,9 @@ struct mtk_dpi { enum mtk_dpi_out_yc_map yc_map; enum mtk_dpi_out_bit_num bit_num; enum mtk_dpi_out_channel_swap channel_swap; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_gpio; + struct pinctrl_state *pins_dpi; int refcount; u32 pclk_sample; }; @@ -387,6 +392,9 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi) if (--dpi->refcount != 0) return; + if (dpi->pinctrl && dpi->pins_gpio) + pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio); + mtk_dpi_disable(dpi); clk_disable_unprepare(dpi->pixel_clk); clk_disable_unprepare(dpi->engine_clk); @@ -411,6 +419,9 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi) goto err_pixel; } + if (dpi->pinctrl && dpi->pins_dpi) + pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi); + mtk_dpi_enable(dpi); return 0; @@ -705,6 +716,7 @@ static const struct mtk_dpi_conf mt8183_conf = { static int mtk_dpi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct device_node *ep; struct mtk_dpi *dpi; struct resource *mem; int comp_id; @@ -716,9 +728,37 @@ static int mtk_dpi_probe(struct platform_device *pdev) dpi->dev = dev; dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev); - of_property_read_u32_index(dev->of_node, "pclk-sample", 1, - &dpi->pclk_sample); + ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); + if (!ep) { + dev_err(dev, "Failed get the endpoint port\n"); + return -EINVAL; + } + + /* Get the sampling edge from the endpoint. */ + of_property_read_u32(ep, "pclk-sample", &dpi->pclk_sample); + of_node_put(ep); + + dpi->pinctrl = devm_pinctrl_get(&pdev->dev); + if (IS_ERR(dpi->pinctrl)) { + dpi->pinctrl = NULL; + dev_dbg(&pdev->dev, "Cannot find pinctrl!\n"); + } + if (dpi->pinctrl) { + dpi->pins_gpio = pinctrl_lookup_state(dpi->pinctrl, "idle"); + if (IS_ERR(dpi->pins_gpio)) { + dpi->pins_gpio = NULL; + dev_dbg(&pdev->dev, "Cannot find pinctrl idle!\n"); + } + if (dpi->pins_gpio) + pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio); + + dpi->pins_dpi = pinctrl_lookup_state(dpi->pinctrl, "active"); + if (IS_ERR(dpi->pins_dpi)) { + dpi->pins_dpi = NULL; + dev_dbg(&pdev->dev, "Cannot find pinctrl active!\n"); + } + } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dpi->regs = devm_ioremap_resource(dev, mem); if (IS_ERR(dpi->regs)) { -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel