[AMD Official Use Only - Internal Distribution Only]
Reviewed-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@xxxxxxx>
-----Original Message-----
From: Alex Deucher <alexdeucher@xxxxxxxxx>
Sent: February 26, 2020 10:40 AM
To: Zuo, Jerry <Jerry.Zuo@xxxxxxx>
Cc: Liu, Zhan <Zhan.Liu@xxxxxxx>; Wentland, Harry <Harry.Wentland@xxxxxxx>; amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Maling list - DRI developers <dri-devel@xxxxxxxxxxxxxxxxxxxxx>; Deucher, Alexander <Alexander.Deucher@xxxxxxx>; Broadworth, Mark <Mark.Broadworth@xxxxxxx>
Subject: Re: [PATCH 13/15] drm/amdgpu/display: split dp connector registration (v3)
On Wed, Feb 26, 2020 at 10:36 AM Zuo, Jerry <Jerry.Zuo@xxxxxxx> wrote:
>
> [AMD Official Use Only - Internal Distribution Only]
>
> Hi Alex:
>
> The patch set works. Please let me know when you push the change to drm-next.
Can someone give me and R-b or A-b on the patches?
Thanks,
Alex
>
> Thanks a lot.
>
> Regards,
> Jerry
>
> -----Original Message-----
> From: Alex Deucher <alexdeucher@xxxxxxxxx>
> Sent: February 25, 2020 1:42 PM
> To: Zuo, Jerry <Jerry.Zuo@xxxxxxx>
> Cc: Liu, Zhan <Zhan.Liu@xxxxxxx>; Wentland, Harry
> <Harry.Wentland@xxxxxxx>; amd-gfx list
> <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Maling list - DRI developers
> <dri-devel@xxxxxxxxxxxxxxxxxxxxx>; Deucher, Alexander
> <Alexander.Deucher@xxxxxxx>; Broadworth, Mark
> <Mark.Broadworth@xxxxxxx>
> Subject: Re: [PATCH 13/15] drm/amdgpu/display: split dp connector
> registration (v3)
>
> On Tue, Feb 25, 2020 at 1:32 PM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
> >
> > On Tue, Feb 25, 2020 at 1:30 PM Zuo, Jerry <Jerry.Zuo@xxxxxxx> wrote:
> > >
> > > [AMD Official Use Only - Internal Distribution Only]
> > >
> > > Hi Alex:
> > >
> > > It happened when a MST monitor is attached, either in driver load or hotplug later.
> >
> > I think I found the issue. I'll send a patch shortly.
>
> Attaching two patches. I think patch 1 should fix it. Patch 2 is the
> same patch as before. I'm not sure
> drm_dp_mst_connector_late_register() is necessary since no other driver calls it.
>
> Alex
>
> >
> > Alex
> >
> >
> > >
> > > Regards,
> > > Jerry
> > >
> > > -----Original Message-----
> > > From: Alex Deucher <alexdeucher@xxxxxxxxx>
> > > Sent: February 25, 2020 1:23 PM
> > > To: Liu, Zhan <Zhan.Liu@xxxxxxx>
> > > Cc: Wentland, Harry <Harry.Wentland@xxxxxxx>; Zuo, Jerry
> > > <Jerry.Zuo@xxxxxxx>; amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>;
> > > Maling list - DRI developers <dri-devel@xxxxxxxxxxxxxxxxxxxxx>;
> > > Deucher, Alexander <Alexander.Deucher@xxxxxxx>; Broadworth, Mark
> > > <Mark.Broadworth@xxxxxxx>
> > > Subject: Re: [PATCH 13/15] drm/amdgpu/display: split dp connector
> > > registration (v3)
> > >
> > > On Tue, Feb 25, 2020 at 1:20 PM Liu, Zhan <Zhan.Liu@xxxxxxx> wrote:
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Liu, Zhan
> > > > > Sent: 2020/February/25, Tuesday 10:10 AM
> > > > > To: Alex Deucher <alexdeucher@xxxxxxxxx>; Wentland, Harry
> > > > > <Harry.Wentland@xxxxxxx>
> > > > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Maling list
> > > > > - DRI developers <dri-devel@xxxxxxxxxxxxxxxxxxxxx>; Deucher,
> > > > > Alexander <Alexander.Deucher@xxxxxxx>; Broadworth, Mark
> > > > > <Mark.Broadworth@xxxxxxx>
> > > > > Subject: RE: [PATCH 13/15] drm/amdgpu/display: split dp
> > > > > connector registration (v3)
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Alex Deucher <alexdeucher@xxxxxxxxx>
> > > > > > Sent: 2020/February/25, Tuesday 9:07 AM
> > > > > > To: Wentland, Harry <Harry.Wentland@xxxxxxx>
> > > > > > Cc: amd-gfx list <amd-gfx@xxxxxxxxxxxxxxxxxxxxx>; Maling
> > > > > > list
> > > > > > - DRI developers <dri-devel@xxxxxxxxxxxxxxxxxxxxx>; Deucher,
> > > > > > Alexander <Alexander.Deucher@xxxxxxx>; Broadworth, Mark
> > > > > > <Mark.Broadworth@xxxxxxx>; Liu, Zhan <Zhan.Liu@xxxxxxx>
> > > > > > Subject: Re: [PATCH 13/15] drm/amdgpu/display: split dp
> > > > > > connector registration (v3)
> > > > > >
> > > > > > On Mon, Feb 24, 2020 at 4:09 PM Harry Wentland
> > > > > > <hwentlan@xxxxxxx>
> > > > > > wrote:
> > > > > > >
> > > > > > > On 2020-02-07 4:17 p.m., Alex Deucher wrote:
> > > > > > > > Split into init and register functions to avoid a
> > > > > > > > segfault in some configs when the load/unload callbacks are removed.
> > > > > > > >
> > > > > > >
> > > > > > > Looks like MST is completely broken with this change with
> > > > > > > a NULL pointer dereference in drm_dp_aux_register.
> > > > > > >
> > > > > > > > v2:
> > > > > > > > - add back accidently dropped has_aux setting
> > > > > > > > - set dev in late_register
> > > > > > > >
> > > > > > > > v3:
> > > > > > > > - fix dp cec ordering
> > > > > > > >
> > > > > > > > Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
> > > > > > > > ---
> > > > > > > > drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 16
> > > > > > ++++++++++++++++
> > > > > > > > drivers/gpu/drm/amd/amdgpu/atombios_dp.c | 10 ++--------
> > > > > > > > .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 7
> > > > > > > > ++++++-
> > > > > > > > 3 files changed, 24 insertions(+), 9 deletions(-)
> > > > > > > >
> > > > > > > > diff --git
> > > > > > > > a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
> > > > > > > > b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
> > > > > > > > index ec1501e3a63a..f355d9a752d2 100644
> > > > > > > > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
> > > > > > > > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
> > > > > > > > @@ -1461,6 +1461,20 @@ static enum drm_mode_status
> > > > > > amdgpu_connector_dp_mode_valid(struct drm_connector
> > > > > > > > return MODE_OK;
> > > > > > > > }
> > > > > > > >
> > > > > > > > +static int
> > > > > > > > +amdgpu_connector_late_register(struct drm_connector *connector) {
> > > > > > > > + struct amdgpu_connector *amdgpu_connector =
> > > > > > to_amdgpu_connector(connector);
> > > > > > > > + int r = 0;
> > > > > > > > +
> > > > > > > > + if (amdgpu_connector->ddc_bus->has_aux) {
> > > > > > > > + amdgpu_connector->ddc_bus->aux.dev =
> > > > > > > > + amdgpu_connector-
> > > > > > >base.kdev;
> > > > > > > > + r = drm_dp_aux_register(&amdgpu_connector->ddc_bus->aux);
> > > > > > > > + }
> > > > > > > > +
> > > > > > > > + return r;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > static const struct drm_connector_helper_funcs
> > > > > > amdgpu_connector_dp_helper_funcs = {
> > > > > > > > .get_modes = amdgpu_connector_dp_get_modes,
> > > > > > > > .mode_valid = amdgpu_connector_dp_mode_valid, @@
> > > > > > > > -1475,6
> > > > > > > > +1489,7 @@ static const struct drm_connector_funcs
> > > > > > amdgpu_connector_dp_funcs = {
> > > > > > > > .early_unregister = amdgpu_connector_unregister,
> > > > > > > > .destroy = amdgpu_connector_destroy,
> > > > > > > > .force = amdgpu_connector_dvi_force,
> > > > > > > > + .late_register = amdgpu_connector_late_register,
> > > > > > > > };
> > > > > > > >
> > > > > > > > static const struct drm_connector_funcs
> > > > > > > > amdgpu_connector_edp_funcs = { @@ -1485,6 +1500,7 @@
> > > > > > > > static
> > > > > const
> > > > > > > > struct drm_connector_funcs
> > > > > > amdgpu_connector_edp_funcs = {
> > > > > > > > .early_unregister = amdgpu_connector_unregister,
> > > > > > > > .destroy = amdgpu_connector_destroy,
> > > > > > > > .force = amdgpu_connector_dvi_force,
> > > > > > > > + .late_register = amdgpu_connector_late_register,
> > > > > > > > };
> > > > > > > >
> > > > > > > > void
> > > > > > > > diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
> > > > > > > > b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
> > > > > > > > index ea702a64f807..9b74cfdba7b8 100644
> > > > > > > > --- a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
> > > > > > > > +++ b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
> > > > > > > > @@ -186,16 +186,10 @@
> > > > > > > > amdgpu_atombios_dp_aux_transfer(struct
> > > > > > > > drm_dp_aux *aux, struct drm_dp_aux_msg *m
> > > > > > > >
> > > > > > > > void amdgpu_atombios_dp_aux_init(struct
> > > > > > > > amdgpu_connector
> > > > > > > > *amdgpu_connector) {
> > > > > > > > - int ret;
> > > > > > > > -
> > > > > > > > amdgpu_connector->ddc_bus->rec.hpd =
> > > > > > > > amdgpu_connector-
> > > > > > >hpd.hpd;
> > > > > > > > - amdgpu_connector->ddc_bus->aux.dev = amdgpu_connector-
> > > > > > >base.kdev;
> > > > > > > > amdgpu_connector->ddc_bus->aux.transfer =
> > > > > > amdgpu_atombios_dp_aux_transfer;
> > > > > > > > - ret = drm_dp_aux_register(&amdgpu_connector->ddc_bus->aux);
> > > > > > > > - if (!ret)
> > > > > > > > - amdgpu_connector->ddc_bus->has_aux = true;
> > > > > > > > -
> > > > > > > > - WARN(ret, "drm_dp_aux_register_i2c_bus() failed with error %d\n",
> > > > > > ret);
> > > > > > > > + drm_dp_aux_init(&amdgpu_connector->ddc_bus->aux);
> > > > > > > > + amdgpu_connector->ddc_bus->has_aux = true;
> > > > > > > > }
> > > > > > > >
> > > > > > > > /***** general DP utility functions *****/ diff --git
> > > > > > > > a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_ty
> > > > > > > > pe
> > > > > > > > s.c
> > > > > > > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_ty
> > > > > > > > pe s.c index 3959c942c88b..d5b9e72f2649 100644
> > > > > > > > ---
> > > > > > a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.
> > > > > > c
> > > > > > > > +++
> > > > > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.
> > > > > > c
> > > > > > > > @@ -155,6 +155,11 @@
> > > > > > amdgpu_dm_mst_connector_late_register(struct drm_connector
> > > > > > *connector)
> > > > > > > > struct amdgpu_dm_connector *amdgpu_dm_connector =
> > > > > > > > to_amdgpu_dm_connector(connector);
> > > > > > > > struct drm_dp_mst_port *port =
> > > > > > > > amdgpu_dm_connector->port;
> > > > > > > > + int r;
> > > > > > > > +
> > > > > > > > + r =
> > > > > > > > + drm_dp_aux_register(&amdgpu_dm_connector->dm_dp_aux.au
> > > > > > > > + x)
> > > > > > > > + ;
> > > > > > >
> > > > > > > This calls drm_dp_aux_register_devnode which is also
> > > > > > > called later in drm_dp_mst_connector_late_register. Wonder if that's a problem.
> > > > > >
> > > > > > Does this patch help? I'm not too familiar with the MST
> > > > > > code and I don't have an MST monitor.
> > > > >
> > > > > I have an MST monitor and I can give it a spin. I'll get back to you later.
> > > >
> > > > + Jerry who is following up on this issue
> > > >
> > > > Thank you Alex for your patch. Unfortunately, it doesn't solve the issue.
> > > >
> > > > Jerry is following up on this ticket, and I've added him to this email thread.
> > >
> > > Can you send me the full dmesg output? Also, does it happen as soon as the driver loads or sometime later?
> > >
> > > Alex
> > >
> > >
> > > >
> > > > Zhan
> > > >
> > > > >
> > > > > Zhan
> > > > >
> > > > > >
> > > > > > Alex
> > > > > >
> > > > > >
> > > > > > >
> > > > > > > Harry
> > > > > > >
> > > > > > > > + if (r)
> > > > > > > > + return r;
> > > > > > > >
> > > > > > > > #if defined(CONFIG_DEBUG_FS)
> > > > > > > > connector_debugfs_init(amdgpu_dm_connector);
> > > > > > > > @@ -484,7 +489,7 @@ void
> > > > > amdgpu_dm_initialize_dp_connector(struct
> > > > > > amdgpu_display_manager *dm,
> > > > > > > > aconnector->dm_dp_aux.aux.transfer = dm_dp_aux_transfer;
> > > > > > > > aconnector->dm_dp_aux.ddc_service =
> > > > > > > > aconnector->dc_link->ddc;
> > > > > > > >
> > > > > > > > - drm_dp_aux_register(&aconnector->dm_dp_aux.aux);
> > > > > > > > + drm_dp_aux_init(&aconnector->dm_dp_aux.aux);
> > > > > > > > drm_dp_cec_register_connector(&aconnector->dm_dp_aux.aux,
> > > > > > > > &aconnector->base);
> > > > > > > >
> > > > > > > >
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
