On Thu, 20 Feb 2020, Linus Walleij wrote: > The code in the Corgi backlight driver can be considerably > simplified by moving to GPIO descriptors and lookup tables > from the board files instead of passing GPIO numbers using > the old API. > > Make sure to encode inversion semantics for the Akita and > Spitz platforms inside the GPIO lookup table and drop the > custom inversion semantics from the driver. > > All in-tree users are converted in this patch. > > Cc: Andrea Adami <andrea.adami@xxxxxxxxx> > Acked-by: Robert Jarzmik <robert.jarzmik@xxxxxxx> > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > --- > ChangeLog v2->v3: > - Switch the SPI bus name to "spi1.1" rather than "spi0.1" for > Corgi and "spi2.1" rather than "spi0.1" for Spitz, as > pxa2xx_set_spi_info() sets the bus number to 1 and 2 > respectively. > ChangeLog v1->v2: > - Collect Robert's ACK. > --- > arch/arm/mach-pxa/corgi.c | 12 ++++- > arch/arm/mach-pxa/spitz.c | 34 +++++++++++---- > drivers/video/backlight/corgi_lcd.c | 68 ++++++++--------------------- > include/linux/spi/corgi_lcd.h | 3 -- > 4 files changed, 54 insertions(+), 63 deletions(-) Applied, thanks. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
