Since ANX6345 driver has been merged we can add support for Pinebook LCD This is a follow up on [1] which attempted to add support for all the A64-based Pinebooks. Since patches for 768p were dropped we don't need edp-connector binding discussed in [1] and its earlier versions and we can use panel-simple binding as everyone else does. If we ever going to add support for 768p we can do it through dt-overlay with appropriate panel node or by teaching bootloader to patch dtb with correct panel compatible. Similar approach was chosen in [2] [1] https://patchwork.kernel.org/cover/10814169/ [2] https://patchwork.kernel.org/patch/11277765/ v2: - Collect r-b tags - Don't print devm_regulator_get() error only if it is -EPROBE_DEFER - Keep compatibles alphabetically sorted in panel-simple.yaml - Properly indent new panel modes - Drop #address-cells, #size-cells properties and @0 suffix of endpoints in sun50i-a64-pinebook.dts Icenowy Zheng (1): arm64: allwinner: a64: enable LCD-related hardware for Pinebook Samuel Holland (1): drm/bridge: anx6345: Fix getting anx6345 regulators Vasily Khoruzhick (4): drm/bridge: anx6345: don't print error message if regulator is not ready dt-bindings: Add Guangdong Neweast Optoelectronics CO. LTD vendor prefix dt-bindings: display: simple: Add NewEast Optoelectronics WJFH116008A compatible drm/panel: simple: Add NewEast Optoelectronics CO., LTD WJFH116008A panel support .../bindings/display/panel/panel-simple.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + .../dts/allwinner/sun50i-a64-pinebook.dts | 61 ++++++++++++++++++- .../drm/bridge/analogix/analogix-anx6345.c | 12 ++-- drivers/gpu/drm/panel/panel-simple.c | 48 +++++++++++++++ 5 files changed, 120 insertions(+), 5 deletions(-) -- 2.25.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
