On Tue, 2020-02-25 at 17:40 +0800, Jitao Shi wrote: > DPI can sample on falling, rising or both edge. > When DPI sample the data both rising and falling edge. > It can reduce half data io pins. > Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx> > Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx> > --- > drivers/gpu/drm/mediatek/mtk_dpi.c | 18 ++++++++++++++++-- > 1 file changed, 16 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > index 01fa8b8d763d..df598f87a40f 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > @@ -75,6 +75,7 @@ struct mtk_dpi { > enum mtk_dpi_out_bit_num bit_num; > enum mtk_dpi_out_channel_swap channel_swap; > int refcount; > + u32 pclk_sample; > }; > > static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e) > @@ -348,6 +349,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi) > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN); > } > > +static void mtk_dpi_enable_pclk_sample_dual_edge(struct mtk_dpi *dpi) > +{ > + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, > + DDR_EN | DDR_4PHASE); > + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL); > +} > + > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi, > enum mtk_dpi_out_color_format format) > { > @@ -439,7 +447,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > pll_rate = clk_get_rate(dpi->tvd_clk); > > vm.pixelclock = pll_rate / factor; > - clk_set_rate(dpi->pixel_clk, vm.pixelclock); > + clk_set_rate(dpi->pixel_clk, > + vm.pixelclock * (dpi->pclk_sample > 1 ? 2 : 1)); > vm.pixelclock = clk_get_rate(dpi->pixel_clk); > > dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n", > @@ -450,7 +459,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > limit.y_bottom = 0x0010; > limit.y_top = 0x0FE0; > > - dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING; > + dpi_pol.ck_pol = dpi->pclk_sample == 1 ? > + MTK_DPI_POLARITY_RISING : MTK_DPI_POLARITY_FALLING; > dpi_pol.de_pol = MTK_DPI_POLARITY_RISING; > dpi_pol.hsync_pol = vm.flags & DISPLAY_FLAGS_HSYNC_HIGH ? > MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING; > @@ -504,6 +514,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > mtk_dpi_config_color_format(dpi, dpi->color_format); > mtk_dpi_config_2n_h_fre(dpi); > mtk_dpi_config_disable_edge(dpi); > + if (dpi->pclk_sample > 1) > + mtk_dpi_enable_pclk_sample_dual_edge(dpi); > mtk_dpi_sw_reset(dpi, false); > > return 0; > @@ -689,6 +701,8 @@ static int mtk_dpi_probe(struct platform_device *pdev) > > dpi->dev = dev; > dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev); > + of_property_read_u32_index(dev->of_node, "pclk-sample", 1, > + &dpi->pclk_sample); > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > dpi->regs = devm_ioremap_resource(dev, mem); _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel