Re: [PATCH v10 09/12] dt-bindings: display: bridge: lvds-codec: Add new bus-width prop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Boris,

Thank you for the patch.

On Tue, Jan 28, 2020 at 02:55:11PM +0100, Boris Brezillon wrote:
> Add the bus-width property to describe the input bus format.
> 
> v10:
> * Add changelog to the commit message
> * Add Rob's R-b
> 
> v8 -> v9:
> * No changes
> 
> v7:
> * Rebase on top of lvds-codec changes
> * Drop the data-mapping property
> 
> v4 -> v6:
> * Not part of the series
> 
> v3:
> * New patch
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/display/bridge/lvds-codec.yaml    | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> index 8f373029f5d2..7c4e42f4de61 100644
> --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> @@ -55,6 +55,14 @@ properties:
>          description: |
>            For LVDS encoders, port 0 is the parallel input
>            For LVDS decoders, port 0 is the LVDS input
> +        properties:
> +          bus-width:
> +            allOf:
> +              - $ref: /schemas/types.yaml#/definitions/uint32
> +              - enum: [18, 24]
> +              - default: 24
> +          description:
> +            Number of data lines used to transmit the RGB data.

This is a bit unclear. First of all, depending on whether the node is an
LVDS encoder or decoder, port@0 is either a parallel input or an LVDS
input. The property mentiones RGB data, does it mean it apply to LVDS
encoders only ? Or should it be in port@1 for LVDS decoders ?

Then, I'm not sure what the property describes. Is it the number of data
lanes that the chip has ? Or the number of lanes routed on the board ?
Should it be specified only if the number of lanes on the board is
different than the maximum number of lanes of the hardware ? A more
detailed description is needed.

Updating the example would also be useful.

>  
>        port@1:
>          type: object

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux