Now that we have a driver for the DVP, let's add its DT node.
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
arch/arm/boot/dts/bcm2711.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 4742e1a77a65..1e89f2a810f3 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -12,6 +12,14 @@
interrupt-parent = <&gicv2>;
+
+ clk_108MHz: clk-108M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <108000000>;
+ clock-output-names = "108MHz-clock";
+ };
+
firmware_clocks: firmware-clocks {
compatible = "raspberrypi,firmware-clocks";
raspberrypi,firmware = <&firmware>;
@@ -258,6 +266,14 @@
hvs@7e400000 {
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ dvp: clock@7ef00000 {
+ compatible = "brcm,brcm2711-dvp";
+ reg = <0x7ef00000 0x10>;
+ clocks = <&clk_108MHz>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
arm-pmu {
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
