On Thu, Feb 13, 2020 at 03:54:15PM +0100, Enric Balletbo i Serra wrote: > From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx> 'dt-bindings: ....' for the subject please. > > Add documentation for DT properties supported by anx7688 HDMI-DP > converter. > > Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx> > Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> > --- > > Changes in v2: > - Improve a bit the descriptions using the info from the datasheet. > - Convert binding to yaml. > - Use dual licensing. > > .../bindings/display/bridge/anx7688.yaml | 79 +++++++++++++++++++ Use the full compatible string: analogix,anx7688.yaml > 1 file changed, 79 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7688.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml > new file mode 100644 > index 000000000000..c1b4b5191d44 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml > @@ -0,0 +1,79 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/anx7688.yaml# Don't forget to update this too. > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analogix ANX7688 HDMI to USB Type-C Bridge (Port Controller with MUX) > + > +maintainers: > + - Nicolas Boichat <drinkcat@xxxxxxxxxxxx> > + - Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> > + > +description: | > + The ANX7688 is a single-chip mobile transmitter to support 4K 60 frames per > + second (4096x2160p60) or FHD 120 frames per second (1920x1080p120) video > + resolution from a smartphone or tablet with full function USB-C. > + > + This binding only describes the HDMI to DP display bridge. > + > +properties: > + compatible: > + const: analogix,anx7688 > + > + reg: > + maxItems: 1 > + description: I2C address of the device That's every reg, you can drop 'description'. > + > + ports: > + type: object > + > + properties: > + port@0: > + type: object > + description: | > + Video port for HDMI input > + > + port@1: > + type: object > + description: | > + Video port for DP output > + > + required: > + - port@0 IMO, port@1 should be required too. If not a fixed panel, then it should have a connector node. > + > +required: > + - compatible > + - reg > + - ports > + > +examples: > + - | > + i2c0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + anx7688: dp-bridge@2c { > + compatible = "analogix,anx7688"; > + reg = <0x2c>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + anx7866_in: endpoint { > + remote-endpoint = <&hdmi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + anx7866_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > + }; > -- > 2.25.0 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
