On Fri, Feb 14, 2020 at 05:38:15PM +0100, Jonathan Neuschäfer wrote: > - Format the pipe diagram as a monospace block. > - Fix formatting of the list. Without the empty line, the first dash is > not parsed as a bullet point. > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> > --- > Previous copy: https://lore.kernel.org/lkml/20191002153827.23026-2-j.neuschaefer@xxxxxxx/ > > It seems that this patch got lost, somehow. Occasionally happens with the committer model we have, especially for smaller drivers. Thanks for resending, applied to drm-misc-next now. -Daniel > --- > drivers/gpu/drm/mcde/mcde_drv.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c > index 9a09eba53182..c535abed4765 100644 > --- a/drivers/gpu/drm/mcde/mcde_drv.c > +++ b/drivers/gpu/drm/mcde/mcde_drv.c > @@ -20,11 +20,11 @@ > * input formats including most variants of RGB and YUV. > * > * The hardware has four display pipes, and the layout is a little > - * bit like this: > + * bit like this:: > * > - * Memory -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI > - * External 0..5 0..3 A,B, 3 x DSI bridge > - * source 0..9 C0,C1 2 x DPI > + * Memory -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI > + * External 0..5 0..3 A,B, 3 x DSI bridge > + * source 0..9 C0,C1 2 x DPI > * > * FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for > * panels with embedded buffer. > @@ -43,6 +43,7 @@ > * to change as we exploit more of the hardware capabilities. > * > * TODO: > + * > * - Enabled damaged rectangles using drm_plane_enable_fb_damage_clips() > * so we can selectively just transmit the damaged area to a > * command-only display. > -- > 2.20.1 > -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
