Re: [PATCH v4 4/7] drm/panfrost: Add support for multiple regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/02/2020 05:26, Nicolas Boichat wrote:
> Some GPUs, namely, the bifrost/g72 part on MT8183, have a second
> regulator for their SRAM, let's add support for that.
> 
> We extend the framework in a generic manner so that we could
> support more than 2 regulators, if required.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>

Reviewed-by: Steven Price <steven.price@xxxxxxx>

Thanks,

Steve

> 
> ---
> 
> v4:
>  - nits: Run through latest version of checkpatch:
>    - Use WARN instead of BUG_ON.
>    - Drop braces in single expression for loop.
>    - *comp not * comp
> v3:
>  - Make this more generic, by allowing any number of regulators
>    (in practice we fix the maximum number of regulators to 2, but
>    this could be increased easily).
>  - We only probe the second regulator if the device tree matching
>    data asks for it.
>  - I couldn't find a way to detect the number of regulators in the
>    device tree, if we wanted to refuse to probe the device if there
>    are too many regulators, which might be required for safety, see
>    the thread on v2 [1].
>  - The discussion also included the idea of a separate device tree
>    entry for a "soft PDC", or at least a separate driver. I'm not
>    sure to understand the full picture, and how different vendors
>    implement this, so I'm still integrating everything in the main
>    driver. I'd be happy to try to make mt8183 fit into such a
>    framework after it's created, but I don't think I'm best placed
>    to implement (and again, the main purpose of this was to test
>    if the binding is correct).
> 
> [1] https://patchwork.kernel.org/patch/11322839/
> 
>  drivers/gpu/drm/panfrost/panfrost_device.c | 26 +++++++++++++-------
>  drivers/gpu/drm/panfrost/panfrost_device.h | 15 +++++++++++-
>  drivers/gpu/drm/panfrost/panfrost_drv.c    | 28 +++++++++++++++-------
>  3 files changed, 51 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_device.c b/drivers/gpu/drm/panfrost/panfrost_device.c
> index 238fb6d54df4732..3720d50f6d9f965 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_device.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_device.c
> @@ -87,18 +87,27 @@ static void panfrost_clk_fini(struct panfrost_device *pfdev)
>  
>  static int panfrost_regulator_init(struct panfrost_device *pfdev)
>  {
> -	int ret;
> +	int ret, i;
>  
> -	pfdev->regulator = devm_regulator_get(pfdev->dev, "mali");
> -	if (IS_ERR(pfdev->regulator)) {
> -		ret = PTR_ERR(pfdev->regulator);
> -		dev_err(pfdev->dev, "failed to get regulator: %d\n", ret);
> +	if (WARN(pfdev->comp->num_supplies > ARRAY_SIZE(pfdev->regulators),
> +			"Too many supplies in compatible structure.\n"))
> +		return -EINVAL;
> +
> +	for (i = 0; i < pfdev->comp->num_supplies; i++)
> +		pfdev->regulators[i].supply = pfdev->comp->supply_names[i];
> +
> +	ret = devm_regulator_bulk_get(pfdev->dev,
> +				      pfdev->comp->num_supplies,
> +				      pfdev->regulators);
> +	if (ret < 0) {
> +		dev_err(pfdev->dev, "failed to get regulators: %d\n", ret);
>  		return ret;
>  	}
>  
> -	ret = regulator_enable(pfdev->regulator);
> +	ret = regulator_bulk_enable(pfdev->comp->num_supplies,
> +				    pfdev->regulators);
>  	if (ret < 0) {
> -		dev_err(pfdev->dev, "failed to enable regulator: %d\n", ret);
> +		dev_err(pfdev->dev, "failed to enable regulators: %d\n", ret);
>  		return ret;
>  	}
>  
> @@ -107,7 +116,8 @@ static int panfrost_regulator_init(struct panfrost_device *pfdev)
>  
>  static void panfrost_regulator_fini(struct panfrost_device *pfdev)
>  {
> -	regulator_disable(pfdev->regulator);
> +	regulator_bulk_disable(pfdev->comp->num_supplies,
> +			pfdev->regulators);
>  }
>  
>  int panfrost_device_init(struct panfrost_device *pfdev)
> diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
> index 06713811b92cdf7..c9468bc5573ac9d 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_device.h
> +++ b/drivers/gpu/drm/panfrost/panfrost_device.h
> @@ -7,6 +7,7 @@
>  
>  #include <linux/atomic.h>
>  #include <linux/io-pgtable.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/spinlock.h>
>  #include <drm/drm_device.h>
>  #include <drm/drm_mm.h>
> @@ -19,6 +20,7 @@ struct panfrost_job;
>  struct panfrost_perfcnt;
>  
>  #define NUM_JOB_SLOTS 3
> +#define MAX_REGULATORS 2
>  
>  struct panfrost_features {
>  	u16 id;
> @@ -51,6 +53,16 @@ struct panfrost_features {
>  	unsigned long hw_issues[64 / BITS_PER_LONG];
>  };
>  
> +/*
> + * Features that cannot be automatically detected and need matching using the
> + * compatible string, typically SoC-specific.
> + */
> +struct panfrost_compatible {
> +	/* Supplies count and names. */
> +	int num_supplies;
> +	const char * const *supply_names;
> +};
> +
>  struct panfrost_device {
>  	struct device *dev;
>  	struct drm_device *ddev;
> @@ -59,10 +71,11 @@ struct panfrost_device {
>  	void __iomem *iomem;
>  	struct clk *clock;
>  	struct clk *bus_clock;
> -	struct regulator *regulator;
> +	struct regulator_bulk_data regulators[MAX_REGULATORS];
>  	struct reset_control *rstc;
>  
>  	struct panfrost_features features;
> +	const struct panfrost_compatible *comp;
>  
>  	spinlock_t as_lock;
>  	unsigned long as_in_use_mask;
> diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
> index b7a618db3ee223e..4d08507526239f2 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_drv.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
> @@ -584,6 +584,10 @@ static int panfrost_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, pfdev);
>  
> +	pfdev->comp = of_device_get_match_data(&pdev->dev);
> +	if (!pfdev->comp)
> +		return -ENODEV;
> +
>  	/* Allocate and initialze the DRM device. */
>  	ddev = drm_dev_alloc(&panfrost_drm_driver, &pdev->dev);
>  	if (IS_ERR(ddev))
> @@ -655,16 +659,22 @@ static int panfrost_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +const char * const default_supplies[] = { "mali" };
> +static const struct panfrost_compatible default_data = {
> +	.num_supplies = ARRAY_SIZE(default_supplies),
> +	.supply_names = default_supplies,
> +};
> +
>  static const struct of_device_id dt_match[] = {
> -	{ .compatible = "arm,mali-t604" },
> -	{ .compatible = "arm,mali-t624" },
> -	{ .compatible = "arm,mali-t628" },
> -	{ .compatible = "arm,mali-t720" },
> -	{ .compatible = "arm,mali-t760" },
> -	{ .compatible = "arm,mali-t820" },
> -	{ .compatible = "arm,mali-t830" },
> -	{ .compatible = "arm,mali-t860" },
> -	{ .compatible = "arm,mali-t880" },
> +	{ .compatible = "arm,mali-t604", .data = &default_data, },
> +	{ .compatible = "arm,mali-t624", .data = &default_data, },
> +	{ .compatible = "arm,mali-t628", .data = &default_data, },
> +	{ .compatible = "arm,mali-t720", .data = &default_data, },
> +	{ .compatible = "arm,mali-t760", .data = &default_data, },
> +	{ .compatible = "arm,mali-t820", .data = &default_data, },
> +	{ .compatible = "arm,mali-t830", .data = &default_data, },
> +	{ .compatible = "arm,mali-t860", .data = &default_data, },
> +	{ .compatible = "arm,mali-t880", .data = &default_data, },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, dt_match);
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux