Conversion of the printk based drm logging macros to the struct drm_device based logging macros in display/intel_dp_aux_backlight.c. This also involves extracting the drm_i915_private device pointer from various intel types to use in the macros. Note that this converts DRM_DEBUG_DRIVER to drm_dbg(). References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html Signed-off-by: Wambui Karuga <wambui.karugax@xxxxxxxxx> --- .../drm/i915/display/intel_dp_aux_backlight.c | 72 ++++++++++++------- 1 file changed, 45 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c index e86feebef299..83d9c76e4da9 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c @@ -35,8 +35,9 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable) if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, ®_val) < 0) { - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", - DP_EDP_DISPLAY_CONTROL_REGISTER); + drm_dbg_kms(&dp_to_i915(intel_dp)->drm, + "Failed to read DPCD register 0x%x\n", + DP_EDP_DISPLAY_CONTROL_REGISTER); return; } if (enable) @@ -46,8 +47,9 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable) if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, reg_val) != 1) { - DRM_DEBUG_KMS("Failed to %s aux backlight\n", - enable ? "enable" : "disable"); + drm_dbg_kms(&dp_to_i915(intel_dp)->drm, + "Failed to %s aux backlight\n", + enable ? "enable" : "disable"); } } @@ -65,8 +67,9 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector) if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &mode_reg) != 1) { - DRM_DEBUG_KMS("Failed to read the DPCD register 0x%x\n", - DP_EDP_BACKLIGHT_MODE_SET_REGISTER); + drm_dbg_kms(&dp_to_i915(intel_dp)->drm, + "Failed to read the DPCD register 0x%x\n", + DP_EDP_BACKLIGHT_MODE_SET_REGISTER); return 0; } @@ -80,8 +83,9 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector) if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, &read_val, sizeof(read_val)) < 0) { - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", - DP_EDP_BACKLIGHT_BRIGHTNESS_MSB); + drm_dbg_kms(&dp_to_i915(intel_dp)->drm, + "Failed to read DPCD register 0x%x\n", + DP_EDP_BACKLIGHT_BRIGHTNESS_MSB); return 0; } level = read_val[0]; @@ -111,7 +115,8 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev } if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, vals, sizeof(vals)) < 0) { - DRM_DEBUG_KMS("Failed to write aux backlight level\n"); + drm_dbg_kms(&dp_to_i915(intel_dp)->drm, + "Failed to write aux backlight level\n"); return; } } @@ -133,7 +138,8 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector) freq = dev_priv->vbt.backlight.pwm_freq_hz; if (!freq) { - DRM_DEBUG_KMS("Use panel default backlight frequency\n"); + drm_dbg_kms(&dev_priv->drm, + "Use panel default backlight frequency\n"); return false; } @@ -146,13 +152,14 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector) fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4); if (fxp_min > fxp_actual || fxp_actual > fxp_max) { - DRM_DEBUG_KMS("Actual frequency out of range\n"); + drm_dbg_kms(&dev_priv->drm, "Actual frequency out of range\n"); return false; } if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) { - DRM_DEBUG_KMS("Failed to write aux backlight freq\n"); + drm_dbg_kms(&dev_priv->drm, + "Failed to write aux backlight freq\n"); return false; } return true; @@ -162,14 +169,16 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st const struct drm_connector_state *conn_state) { struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *i915 = to_i915(connector->base.dev); struct intel_dp *intel_dp = intel_attached_dp(connector); struct intel_panel *panel = &connector->panel; u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode; if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) { - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", - DP_EDP_BACKLIGHT_MODE_SET_REGISTER); + drm_dbg_kms(&i915->drm, + "Failed to read DPCD register 0x%x\n", + DP_EDP_BACKLIGHT_MODE_SET_REGISTER); return; } @@ -186,7 +195,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, panel->backlight.pwmgen_bit_count) < 0) - DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n"); + drm_dbg_kms(&i915->drm, + "Failed to write aux pwmgen bit count\n"); break; @@ -203,7 +213,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st if (new_dpcd_buf != dpcd_buf) { if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) { - DRM_DEBUG_KMS("Failed to write aux backlight mode\n"); + drm_dbg_kms(&i915->drm, + "Failed to write aux backlight mode\n"); } } @@ -237,9 +248,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector) * minimum value will applied automatically. So no need to check that. */ freq = i915->vbt.backlight.pwm_freq_hz; - DRM_DEBUG_KMS("VBT defined backlight frequency %u Hz\n", freq); + drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u Hz\n", + freq); if (!freq) { - DRM_DEBUG_KMS("Use panel default backlight frequency\n"); + drm_dbg_kms(&i915->drm, + "Use panel default backlight frequency\n"); return max_backlight; } @@ -254,12 +267,14 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector) */ if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) { - DRM_DEBUG_KMS("Failed to read pwmgen bit count cap min\n"); + drm_dbg_kms(&i915->drm, + "Failed to read pwmgen bit count cap min\n"); return max_backlight; } if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) { - DRM_DEBUG_KMS("Failed to read pwmgen bit count cap max\n"); + drm_dbg_kms(&i915->drm, + "Failed to read pwmgen bit count cap max\n"); return max_backlight; } pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK; @@ -268,7 +283,8 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector) fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4); fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4); if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) { - DRM_DEBUG_KMS("VBT defined backlight frequency out of range\n"); + drm_dbg_kms(&i915->drm, + "VBT defined backlight frequency out of range\n"); return max_backlight; } @@ -279,10 +295,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector) break; } - DRM_DEBUG_KMS("Using eDP pwmgen bit count of %d\n", pn); + drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn); if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) { - DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n"); + drm_dbg_kms(&i915->drm, + "Failed to write aux pwmgen bit count\n"); return max_backlight; } panel->backlight.pwmgen_bit_count = pn; @@ -319,7 +336,8 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector) if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP && (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) && !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) { - DRM_DEBUG_KMS("AUX Backlight Control Supported!\n"); + drm_dbg_kms(&dp_to_i915(intel_dp)->drm, + "AUX Backlight Control Supported!\n"); return true; } return false; @@ -328,8 +346,8 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector) int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) { struct intel_panel *panel = &intel_connector->panel; - enum intel_backlight_type type = - to_i915(intel_connector->base.dev)->vbt.backlight.type; + struct drm_i915_private *i915 = to_i915(intel_connector->base.dev); + enum intel_backlight_type type = i915->vbt.backlight.type; if (i915_modparams.enable_dpcd_backlight == 0 || (i915_modparams.enable_dpcd_backlight == -1 && @@ -337,7 +355,7 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) return -ENODEV; if (type != INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE) - DRM_DEBUG_DRIVER("Ignoring VBT backlight type\n"); + drm_dbg(&i915->drm, "Ignoring VBT backlight type\n"); panel->backlight.setup = intel_dp_aux_setup_backlight; panel->backlight.enable = intel_dp_aux_enable_backlight; -- 2.25.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
