Hi, Evan:
It looks like Sean's version has some problem. So this version is
Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
On Thu, 2020-02-06 at 17:59 +1100, evanbenn@xxxxxxxxxx wrote:
> From: Sean Paul <seanpaul@xxxxxxxxxxxx>
>
> Currently the cursor is placed on the first overlay plane, which means
> it will be at the bottom of the stack when the hw does the compositing
> with anything other than primary plane. Since mtk doesn't support plane
> zpos, change the cursor location to the top-most plane.
>
> Signed-off-by: Evan Benn <evanbenn@xxxxxxxxxxxx>
> Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 29 +++++++++++++++++--------
> 1 file changed, 20 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 7b392d6c71cc..d4078c2089e0 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -658,10 +658,21 @@ static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
>
> static int mtk_drm_crtc_init(struct drm_device *drm,
> struct mtk_drm_crtc *mtk_crtc,
> - struct drm_plane *primary,
> - struct drm_plane *cursor, unsigned int pipe)
> + unsigned int pipe)
> {
> - int ret;
> + int i, ret;
> +
> + struct drm_plane *primary = NULL;
> + struct drm_plane *cursor = NULL;
> +
> + for (i = 0; i < mtk_crtc->layer_nr; ++i) {
> + if (!primary && mtk_crtc->planes[i].type ==
> + DRM_PLANE_TYPE_PRIMARY)
> + primary = &mtk_crtc->planes[i];
> + if (!cursor && mtk_crtc->planes[i].type ==
> + DRM_PLANE_TYPE_CURSOR)
> + cursor = &mtk_crtc->planes[i];
> + }
>
> ret = drm_crtc_init_with_planes(drm, &mtk_crtc->base, primary, cursor,
> &mtk_crtc_funcs, NULL);
> @@ -711,11 +722,12 @@ static int mtk_drm_crtc_num_comp_planes(struct mtk_drm_crtc *mtk_crtc,
> }
>
> static inline
> -enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx)
> +enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx,
> + unsigned int num_planes)
> {
> if (plane_idx == 0)
> return DRM_PLANE_TYPE_PRIMARY;
> - else if (plane_idx == 1)
> + else if (plane_idx == (num_planes - 1))
> return DRM_PLANE_TYPE_CURSOR;
> else
> return DRM_PLANE_TYPE_OVERLAY;
> @@ -734,7 +746,8 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
> ret = mtk_plane_init(drm_dev,
> &mtk_crtc->planes[mtk_crtc->layer_nr],
> BIT(pipe),
> - mtk_drm_crtc_plane_type(mtk_crtc->layer_nr),
> + mtk_drm_crtc_plane_type(mtk_crtc->layer_nr,
> + num_planes),
> mtk_ddp_comp_supported_rotations(comp));
> if (ret)
> return ret;
> @@ -830,9 +843,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
> return ret;
> }
>
> - ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
> - mtk_crtc->layer_nr > 1 ? &mtk_crtc->planes[1] :
> - NULL, pipe);
> + ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, pipe);
> if (ret < 0)
> return ret;
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
