Re: [PATCH v2 3/3] dt-bindings: display: convert panel-dpi to DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jan 25, 2020 at 2:35 PM Sam Ravnborg <sam@xxxxxxxxxxxx> wrote:
>
> With panel-timing converted, now convert the single
> remaining .txt user in panel/ of panel-timing to DT schema.
>
> v2:
>   - Drop Thierry as maintainer, as this is not a general panel binding
>     and I have no acks.
>   - Drop requirement for a panel- specific binding - "panel-dpi" is enough
>   - Updated example
>
> Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Maxime Ripard <mripard@xxxxxxxxxx>
> ---
>  .../bindings/display/panel/panel-dpi.txt      | 50 -------------
>  .../bindings/display/panel/panel-dpi.yaml     | 71 +++++++++++++++++++
>  2 files changed, 71 insertions(+), 50 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-dpi.txt
>  create mode 100644 Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
> deleted file mode 100644
> index 6b203bc4d932..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -Generic MIPI DPI Panel
> -======================
> -
> -Required properties:
> -- compatible: "panel-dpi"
> -
> -Optional properties:
> -- label: a symbolic name for the panel
> -- enable-gpios: panel enable gpio
> -- reset-gpios: GPIO to control the RESET pin
> -- vcc-supply: phandle of regulator that will be used to enable power to the display
> -- backlight: phandle of the backlight device
> -
> -Required nodes:
> -- "panel-timing" containing video timings
> -  (Documentation/devicetree/bindings/display/panel/display-timing.txt)
> -- Video port for DPI input
> -
> -Example
> --------
> -
> -lcd0: display@0 {
> -        compatible = "samsung,lte430wq-f0c", "panel-dpi";
> -        label = "lcd";
> -
> -        backlight = <&backlight>;
> -
> -        port {
> -            lcd_in: endpoint {
> -                    remote-endpoint = <&dpi_out>;
> -            };
> -        };
> -
> -        panel-timing {
> -                clock-frequency = <9200000>;
> -                hactive = <480>;
> -                vactive = <272>;
> -                hfront-porch = <8>;
> -                hback-porch = <4>;
> -                hsync-len = <41>;
> -                vback-porch = <2>;
> -                vfront-porch = <4>;
> -                vsync-len = <10>;
> -
> -                hsync-active = <0>;
> -                vsync-active = <0>;
> -                de-active = <1>;
> -                pixelclk-active = <1>;
> -        };
> -};
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
> new file mode 100644
> index 000000000000..a8e37318ec05
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic MIPI DPI Panel
> +
> +maintainers:
> +  - Sam Ravnborg <sam@xxxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    contains:
> +      const: panel-dpi
> +    description:
> +      Shall contain "panel-dpi" in addition to an optional panel-specific
> +      compatible string defined in individual panel bindings.
> +      "panel-dpi" can be used alone, thus no dedicated binding file
> +      is required for each and every panel.

While this has occurred, I don't think the schema should allow it. I
think a 'minItems: 2' should be added here.

AFAIK, MIPI DPI just defines a spec for what already existed. Maybe it
constrains things somewhat, but to the extent why we require a panel
specific compatible in the first place? Doubtful...

Rob

> +  port: true
> +
> +required:
> +  - panel-timing
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    panel@0 {
> +      compatible = "panel-dpi";
> +      label = "lcd";
> +      vcc-supply = <&vcc_supply>;
> +
> +      backlight = <&backlight>;
> +
> +      port {
> +        lcd_in: endpoint {
> +          remote-endpoint = <&dpi_out>;
> +        };
> +      };
> +      panel-timing {
> +        clock-frequency = <9200000>;
> +        hactive = <800>;
> +        vactive = <480>;
> +        hfront-porch = <8>;
> +        hback-porch = <4>;
> +        hsync-len = <41>;
> +        vback-porch = <2>;
> +        vfront-porch = <4>;
> +        vsync-len = <10>;
> +
> +        hsync-active = <0>;
> +        vsync-active = <0>;
> +        de-active = <1>;
> +        pixelclk-active = <1>;
> +      };
> +    };
> --
> 2.20.1
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux