[AMD Public Use] Hi Lyude, Thanks for the patch! I'm wondering if this error still occurs with this patch applied https://patchwork.kernel.org/patch/11274363/ I tried to clean up all mgr->proposed_vcpis[] in this patch so drm_dp_update_payload_part1() will skip all invalid ports. However, I'm also thinking to improve this patch. Maybe it is better to do cleaning proposed_vcpis[] in dm_helpers_dp_mst_write_payload_allocation_table() due to it is the actual place that DC try to update the status for a specific VC stream. If it's reasonable then I'll do that in the future :) > -----Original Message----- > From: Lyude Paul <lyude@xxxxxxxxxx> > Sent: Saturday, January 25, 2020 2:57 AM > To: Lipski, Mikita <Mikita.Lipski@xxxxxxx>; Wentland, Harry > <Harry.Wentland@xxxxxxx>; amd-gfx@xxxxxxxxxxxxxxxxxxxxx > Cc: stable@xxxxxxxxxxxxxxx; Wentland, Harry <Harry.Wentland@xxxxxxx>; Li, > Sun peng (Leo) <Sunpeng.Li@xxxxxxx>; Deucher, Alexander > <Alexander.Deucher@xxxxxxx>; Koenig, Christian > <Christian.Koenig@xxxxxxx>; Zhou, David(ChunMing) > <David1.Zhou@xxxxxxx>; David Airlie <airlied@xxxxxxxx>; Daniel Vetter > <daniel@xxxxxxxx>; Lakha, Bhawanpreet <Bhawanpreet.Lakha@xxxxxxx>; > Lipski, Mikita <Mikita.Lipski@xxxxxxx>; Sam Ravnborg <sam@xxxxxxxxxxxx>; > David Francis <David.Francis@xxxxxxx>; Tsai, Martin > <Martin.Tsai@xxxxxxx>; Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>; Lee, Alvin > <Alvin.Lee2@xxxxxxx>; Jean Delvare <jdelvare@xxxxxxx>; > dri-devel@xxxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Lin, Wayne > <Wayne.Lin@xxxxxxx> > Subject: Re: [PATCH] drm/amd/dm/mst: Ignore payload update failures on > disable > > > > On Fri, 2020-01-24 at 11:39 -0500, Mikita Lipski wrote: > > > > On 1/24/20 9:55 AM, Harry Wentland wrote: > > > On 2020-01-23 7:06 p.m., Lyude Paul wrote: > > > > Disabling a display on MST can potentially happen after the entire > > > > MST topology has been removed, which means that we can't > > > > communicate with the topology at all in this scenario. Likewise, > > > > this also means that we can't properly update payloads on the > > > > topology and as such, it's a good idea to ignore payload update failures > when disabling displays. > > > > Currently, amdgpu makes the mistake of halting the payload update > > > > process when any payload update failures occur, resulting in > > > > leaving DC's local copies of the payload tables out of date. > > > > > > > > This ends up causing problems with hotplugging MST topologies, and > > > > causes modesets on the second hotplug to fail like so: > > > > > > > > [drm] Failed to updateMST allocation table forpipe idx:1 > > > > ------------[ cut here ]------------ > > > > WARNING: CPU: 5 PID: 1511 at > > > > drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677 > > > > update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Modules linked > > > > in: cdc_ether usbnet fuse xt_conntrack nf_conntrack > > > > nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 > > > > nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc > > > > sunrpc vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek > > > > snd_hda_codec_generic snd_hda_codec_hdmi videobuf2_vmalloc > > > > snd_hda_intel videobuf2_memops > > > > videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul > > > > snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core > > > > ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device > > > > snd_pcm sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi > > > > ledtrig_audio snd wmi soundcore video i2c_scmi acpi_cpufreq > > > > ip_tables amdgpu(O) rtsx_pci_sdmmc amd_iommu_v2 gpu_sched > mmc_core > > > > i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt > > > > fb_sys_fops cec drm crc32c_intel serio_raw hid_multitouch r8152 > > > > mii nvme r8169 nvme_core rtsx_pci pinctrl_amd > > > > CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O > 5.5.0- > > > > rc7Lyude-Test+ #4 > > > > Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS > R12ET22W(0.22 ) > > > > 01/31/2019 > > > > RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] > > > > Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f > > > > b6 06 > > > > 49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> > > > > 0b e9 2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00 > > > > RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202 > > > > RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: > 0000000000000000 > > > > RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610 > > > > RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000 > > > > R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000 > > > > R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: > 0000000000000002 > > > > FS: 00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) > > > > knlGS:0000000000000000 > > > > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > > > CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: > 00000000003406e0 > > > > Call Trace: > > > > ? mutex_lock+0xe/0x30 > > > > dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu] > > > > ? dm_read_reg_func+0x39/0xb0 [amdgpu] > > > > ? core_link_enable_stream+0x656/0x730 [amdgpu] > > > > core_link_enable_stream+0x656/0x730 [amdgpu] > > > > dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu] > > > > ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu] > > > > ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu] > > > > dc_commit_state+0x292/0x770 [amdgpu] > > > > ? add_timer+0x101/0x1f0 > > > > ? ttm_bo_put+0x1a1/0x2f0 [ttm] > > > > amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu] > > > > ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu] > > > > ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu] > > > > ? ttm_bo_handle_move_mem+0x118/0x570 [ttm] > > > > ? ttm_bo_validate+0x134/0x150 [ttm] > > > > ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu] > > > > ? _cond_resched+0x15/0x30 > > > > ? wait_for_completion_timeout+0x38/0x160 > > > > ? _cond_resched+0x15/0x30 > > > > ? wait_for_completion_interruptible+0x33/0x190 > > > > commit_tail+0x94/0x130 [drm_kms_helper] > > > > drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper] > > > > drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper] > > > > drm_mode_setcrtc+0x194/0x6a0 [drm] > > > > ? _cond_resched+0x15/0x30 > > > > ? mutex_lock+0xe/0x30 > > > > ? drm_mode_getcrtc+0x180/0x180 [drm] > > > > drm_ioctl_kernel+0xaa/0xf0 [drm] > > > > drm_ioctl+0x208/0x390 [drm] > > > > ? drm_mode_getcrtc+0x180/0x180 [drm] > > > > amdgpu_drm_ioctl+0x49/0x80 [amdgpu] > > > > do_vfs_ioctl+0x458/0x6d0 > > > > ksys_ioctl+0x5e/0x90 > > > > __x64_sys_ioctl+0x16/0x20 > > > > do_syscall_64+0x55/0x1b0 > > > > entry_SYSCALL_64_after_hwframe+0x44/0xa9 > > > > RIP: 0033:0x7fab2121f87b > > > > Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 > > > > ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 > > > > <48> 3d 01 > > > > f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48 > > > > RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: > > > > 0000000000000010 > > > > RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b > > > > RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b > > > > RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: > 000055dbd2985d10 > > > > R10: 000055dbd2196280 R11: 0000000000000246 R12: > 00000000c06864a2 > > > > R13: 000000000000000b R14: 0000000000000000 R15: > 000055dbd2196280 > > > > ---[ end trace 6ea888c24d2059cd ]--- > > > > > > > > Note as well, I have only been able to reproduce this on setups > > > > with 2 MST displays. > > > > > > > > Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx> > > > > Cc: stable@xxxxxxxxxxxxxxx > > > > > > LGTM but would like Mikita or Wayne to have a look as well. > > > Acked-by: Harry Wentland <harry.wentland@xxxxxxx> > > > > I think its a good change and it definetely helps to deal with > > discreptency between drm and dc payload allocation tables. > > But I think we might not even need extra enable checks. > > I think you're right here, I'll remove those in the next respin > > > > > > Harry > > > > > > > --- > > > > drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 7 > ++++--- > > > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > > > > > diff --git > > > > a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c > > > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c > > > > index 069b7a6f5597..252fa60c6775 100644 > > > > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c > > > > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c > > > > @@ -216,6 +216,7 @@ bool > > > > dm_helpers_dp_mst_write_payload_allocation_table( > > > > drm_dp_mst_reset_vcpi_slots(mst_mgr, mst_port); > > > > } > > > > > > > > + /* If disabling, it's OK for this to fail */ > > > > ret = drm_dp_update_payload_part1(mst_mgr); > > > > > > > > /* mst_mgr->->payloads are VC payload notify MST branch using > > > > DPCD or @@ -225,7 +226,7 @@ bool > > > > dm_helpers_dp_mst_write_payload_allocation_table( > > > > > > > > get_payload_table(aconnector, proposed_table); > > > > > > > > - if (ret) > > > > + if (ret && !enable) > > > > return false; > > > > Wouldn't it be better to check ret value, and instead of returning > > false just throw DRM_ERROR message, since drm_dp_update_payload_part1 > > only returns error if a port is not validated? > > You're right on avoiding returning here, that's probably a better idea since we > want all steps to be run even if they don't succeed. I think we can skip the > error message though, it's expected that modesets which disable displays will > happen on ports that no longer can be validated. > > > > > Thank you, > > Mikita > > > > > > > > > > return true; > > > > @@ -299,9 +300,9 @@ bool > dm_helpers_dp_mst_send_payload_allocation( > > > > if (!mst_mgr->mst_state) > > > > return false; > > > > > > > > + /* If disabling, it's OK for this to fail */ > > > > ret = drm_dp_update_payload_part2(mst_mgr); > > > > - > > > > - if (ret) > > > > + if (enable && ret) > > > > return false; > > > > > > > > if (!enable) > -- > Cheers, > Lyude Paul -- Best regards, Wayne Lin _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel