Re: [PATCH v2 2/6] drm/i915/ddi: convert to struct drm_device log macros.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 22 Jan 2020, Wambui Karuga <wambui.karugax@xxxxxxxxx> wrote:
> This patch converts various instances of the printk based logging macros
> into the struct drm_device based macros. This was achieved using the
> following coccinelle script for matching existing struct
> drm_i915_private devices:

This one conflicts already, please rebase. Pushed the others to
drm-intel-next-queued, thanks for the patches.

BR,
Jani.



> @rule1@
> identifier fn, T;
> @@
>
> fn(...,struct drm_i915_private *T,...) {
> <+...
> (
> -DRM_INFO(
> +drm_info(&T->drm,
> ...)
> |
> -DRM_ERROR(
> +drm_err(&T->drm,
> ...)
> |
> -DRM_WARN(
> +drm_warn(&T->drm,
> ...)
> |
> -DRM_DEBUG(
> +drm_dbg(&T->drm,
> ...)
> |
> -DRM_DEBUG_DRIVER(
> +drm_dbg(&T->drm,
> ...)
> |
> -DRM_DEBUG_KMS(
> +drm_dbg_kms(&T->drm,
> ...)
> |
> -DRM_DEBUG_ATOMIC(
> +drm_dbg_atomic(&T->drm,
> ...)
> )
> ...+>
> }
>
> @rule2@
> identifier fn, T;
> @@
>
> fn(...) {
> ...
> struct drm_i915_private *T = ...;
> <+...
> (
> -DRM_INFO(
> +drm_info(&T->drm,
> ...)
> |
> -DRM_ERROR(
> +drm_err(&T->drm,
> ...)
> |
> -DRM_WARN(
> +drm_warn(&T->drm,
> ...)
> |
> -DRM_DEBUG(
> +drm_dbg(&T->drm,
> ...)
> |
> -DRM_DEBUG_KMS(
> +drm_dbg_kms(&T->drm,
> ...)
> |
> -DRM_DEBUG_DRIVER(
> +drm_dbg(&T->drm,
> ...)
> |
> -DRM_DEBUG_ATOMIC(
> +drm_dbg_atomic(&T->drm,
> ...)
> )
> ...+>
> }
>
> Checkpatch warnings were addressed manually.
>
> Signed-off-by: Wambui Karuga <wambui.karugax@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c | 98 +++++++++++++++---------
>  1 file changed, 60 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index bbf1c0a243a2..9416d6950853 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -1076,7 +1076,8 @@ static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
>  		if (I915_READ(reg) & DDI_BUF_IS_IDLE)
>  			return;
>  	}
> -	DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
> +	drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c idle bit\n",
> +		port_name(port));
>  }
>  
>  static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
> @@ -1229,7 +1230,8 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
>  
>  		temp = I915_READ(DP_TP_STATUS(PORT_E));
>  		if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
> -			DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
> +			drm_dbg_kms(&dev_priv->drm,
> +				    "FDI link training done on step %d\n", i);
>  			break;
>  		}
>  
> @@ -1238,7 +1240,7 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
>  		 * Results in less fireworks from the state checker.
>  		 */
>  		if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) {
> -			DRM_ERROR("FDI link training failed!\n");
> +			drm_err(&dev_priv->drm, "FDI link training failed!\n");
>  			break;
>  		}
>  
> @@ -2005,7 +2007,8 @@ void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state
>  
>  	if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME &&
>  	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
> -		DRM_DEBUG_KMS("Quirk Increase DDI disabled time\n");
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "Quirk Increase DDI disabled time\n");
>  		/* Quirk time at 100ms for reliable operation */
>  		msleep(100);
>  	}
> @@ -2183,20 +2186,23 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
>  	}
>  
>  	if (!*pipe_mask)
> -		DRM_DEBUG_KMS("No pipe for [ENCODER:%d:%s] found\n",
> -			      encoder->base.base.id, encoder->base.name);
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "No pipe for [ENCODER:%d:%s] found\n",
> +			    encoder->base.base.id, encoder->base.name);
>  
>  	if (!mst_pipe_mask && hweight8(*pipe_mask) > 1) {
> -		DRM_DEBUG_KMS("Multiple pipes for [ENCODER:%d:%s] (pipe_mask %02x)\n",
> -			      encoder->base.base.id, encoder->base.name,
> -			      *pipe_mask);
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "Multiple pipes for [ENCODER:%d:%s] (pipe_mask %02x)\n",
> +			    encoder->base.base.id, encoder->base.name,
> +			    *pipe_mask);
>  		*pipe_mask = BIT(ffs(*pipe_mask) - 1);
>  	}
>  
>  	if (mst_pipe_mask && mst_pipe_mask != *pipe_mask)
> -		DRM_DEBUG_KMS("Conflicting MST and non-MST state for [ENCODER:%d:%s] (pipe_mask %02x mst_pipe_mask %02x)\n",
> -			      encoder->base.base.id, encoder->base.name,
> -			      *pipe_mask, mst_pipe_mask);
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "Conflicting MST and non-MST state for [ENCODER:%d:%s] (pipe_mask %02x mst_pipe_mask %02x)\n",
> +			    encoder->base.base.id, encoder->base.name,
> +			    *pipe_mask, mst_pipe_mask);
>  	else
>  		*is_dp_mst = mst_pipe_mask;
>  
> @@ -2206,9 +2212,10 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
>  		if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK |
>  			    BXT_PHY_LANE_POWERDOWN_ACK |
>  			    BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED)
> -			DRM_ERROR("[ENCODER:%d:%s] enabled but PHY powered down? "
> -				  "(PHY_CTL %08x)\n", encoder->base.base.id,
> -				  encoder->base.name, tmp);
> +			drm_err(&dev_priv->drm,
> +				"[ENCODER:%d:%s] enabled but PHY powered down? "
> +				"(PHY_CTL %08x)\n", encoder->base.base.id,
> +				encoder->base.name, tmp);
>  	}
>  
>  	intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
> @@ -2365,7 +2372,7 @@ static void skl_ddi_set_iboost(struct intel_encoder *encoder,
>  
>  	/* Make sure that the requested I_boost is valid */
>  	if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) {
> -		DRM_ERROR("Invalid I_boost value %u\n", iboost);
> +		drm_err(&dev_priv->drm, "Invalid I_boost value %u\n", iboost);
>  		return;
>  	}
>  
> @@ -2617,7 +2624,9 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
>  		return;
>  
>  	if (level >= n_entries) {
> -		DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.", level, n_entries - 1);
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "DDI translation not found for level %d. Using %d instead.",
> +			    level, n_entries - 1);
>  		level = n_entries - 1;
>  	}
>  
> @@ -2743,8 +2752,9 @@ static void icl_mg_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
>  	ddi_translations = icl_mg_phy_ddi_translations;
>  	/* The table does not have values for level 3 and level 9. */
>  	if (level >= n_entries || level == 3 || level == 9) {
> -		DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.",
> -			      level, n_entries - 2);
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "DDI translation not found for level %d. Using %d instead.",
> +			    level, n_entries - 2);
>  		level = n_entries - 2;
>  	}
>  
> @@ -3324,7 +3334,8 @@ static void intel_ddi_enable_fec(struct intel_encoder *encoder,
>  
>  	if (intel_de_wait_for_set(dev_priv, intel_dp->regs.dp_tp_status,
>  				  DP_TP_STATUS_FEC_ENABLE_LIVE, 1))
> -		DRM_ERROR("Timed out waiting for FEC Enable Status\n");
> +		drm_err(&dev_priv->drm,
> +			"Timed out waiting for FEC Enable Status\n");
>  }
>  
>  static void intel_ddi_disable_fec_state(struct intel_encoder *encoder,
> @@ -3407,7 +3418,8 @@ static void tgl_dc3co_exitline_compute_config(struct intel_encoder *encoder,
>  		return;
>  
>  	cstate->dc3co_exitline = crtc_vdisplay - exit_scanlines;
> -	DRM_DEBUG_KMS("DC3CO exit scanlines %d\n", cstate->dc3co_exitline);
> +	drm_dbg_kms(&dev_priv->drm, "DC3CO exit scanlines %d\n",
> +		    cstate->dc3co_exitline);
>  }
>  
>  static void tgl_dc3co_exitline_get_config(struct intel_crtc_state *crtc_state)
> @@ -3856,8 +3868,9 @@ static void icl_disable_transcoder_port_sync(const struct intel_crtc_state *old_
>  	if (old_crtc_state->master_transcoder == INVALID_TRANSCODER)
>  		return;
>  
> -	DRM_DEBUG_KMS("Disabling Transcoder Port Sync on Slave Transcoder %s\n",
> -		      transcoder_name(old_crtc_state->cpu_transcoder));
> +	drm_dbg_kms(&dev_priv->drm,
> +		    "Disabling Transcoder Port Sync on Slave Transcoder %s\n",
> +		    transcoder_name(old_crtc_state->cpu_transcoder));
>  
>  	I915_WRITE(TRANS_DDI_FUNC_CTL2(old_crtc_state->cpu_transcoder), 0);
>  }
> @@ -4007,8 +4020,9 @@ static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
>  	if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
>  					       crtc_state->hdmi_high_tmds_clock_ratio,
>  					       crtc_state->hdmi_scrambling))
> -		DRM_ERROR("[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
> -			  connector->base.id, connector->name);
> +		drm_err(&dev_priv->drm,
> +			"[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
> +			connector->base.id, connector->name);
>  
>  	/* Display WA #1143: skl,kbl,cfl */
>  	if (IS_GEN9_BC(dev_priv)) {
> @@ -4385,9 +4399,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
>  			pipe_config->fec_enable =
>  				I915_READ(dp_tp_ctl) & DP_TP_CTL_FEC_ENABLE;
>  
> -			DRM_DEBUG_KMS("[ENCODER:%d:%s] Fec status: %u\n",
> -				      encoder->base.base.id, encoder->base.name,
> -				      pipe_config->fec_enable);
> +			drm_dbg_kms(&dev_priv->drm,
> +				    "[ENCODER:%d:%s] Fec status: %u\n",
> +				    encoder->base.base.id, encoder->base.name,
> +				    pipe_config->fec_enable);
>  		}
>  
>  		break;
> @@ -4427,8 +4442,9 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
>  		 * up by the BIOS, and thus we can't get the mode at module
>  		 * load.
>  		 */
> -		DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
> -			      pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
> +			    pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
>  		dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
>  	}
>  
> @@ -4625,7 +4641,8 @@ static int intel_hdmi_reset_link(struct intel_encoder *encoder,
>  
>  	ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
>  	if (ret < 0) {
> -		DRM_ERROR("Failed to read TMDS config: %d\n", ret);
> +		drm_err(&dev_priv->drm, "Failed to read TMDS config: %d\n",
> +			ret);
>  		return 0;
>  	}
>  
> @@ -4770,7 +4787,8 @@ intel_ddi_max_lanes(struct intel_digital_port *intel_dport)
>  	 * so we use the proper lane count for our calculations.
>  	 */
>  	if (intel_ddi_a_force_4_lanes(intel_dport)) {
> -		DRM_DEBUG_KMS("Forcing DDI_A_4_LANES for port A\n");
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "Forcing DDI_A_4_LANES for port A\n");
>  		intel_dport->saved_port_bits |= DDI_A_4_LANES;
>  		max_lanes = 4;
>  	}
> @@ -4798,12 +4816,14 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  		init_dp = true;
>  		init_lspcon = true;
>  		init_hdmi = false;
> -		DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port));
> +		drm_dbg_kms(&dev_priv->drm, "VBT says port %c has lspcon\n",
> +			    port_name(port));
>  	}
>  
>  	if (!init_dp && !init_hdmi) {
> -		DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
> -			      port_name(port));
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
> +			    port_name(port));
>  		return;
>  	}
>  
> @@ -4879,14 +4899,16 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  	if (init_lspcon) {
>  		if (lspcon_init(intel_dig_port))
>  			/* TODO: handle hdmi info frame part */
> -			DRM_DEBUG_KMS("LSPCON init success on port %c\n",
> -				port_name(port));
> +			drm_dbg_kms(&dev_priv->drm,
> +				    "LSPCON init success on port %c\n",
> +				    port_name(port));
>  		else
>  			/*
>  			 * LSPCON init faied, but DP init was success, so
>  			 * lets try to drive as DP++ port.
>  			 */
> -			DRM_ERROR("LSPCON init failed on port %c\n",
> +			drm_err(&dev_priv->drm,
> +				"LSPCON init failed on port %c\n",
>  				port_name(port));
>  	}

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux