Add UBWC global configuration for display on
SC7180 target.
Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 58 +++++++++++++++++++++++++++++++-
1 file changed, 57 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
index 29705e7..80d3cfc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
@@ -12,6 +12,7 @@
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
+#define HW_REV 0x0
#define HW_INTR_STATUS 0x0010
/* Max BW defined in KBps */
@@ -22,6 +23,17 @@ struct dpu_irq_controller {
struct irq_domain *domain;
};
+struct dpu_hw_cfg {
+ u32 val;
+ u32 offset;
+};
+
+struct dpu_mdss_hw_init_handler {
+ u32 hw_rev;
+ u32 hw_reg_count;
+ struct dpu_hw_cfg* hw_cfg;
+};
+
struct dpu_mdss {
struct msm_mdss base;
void __iomem *mmio;
@@ -32,6 +44,44 @@ struct dpu_mdss {
u32 num_paths;
};
+static struct dpu_hw_cfg hw_cfg[] = {
+ {
+ /* UBWC global settings */
+ .val = 0x1E,
+ .offset = 0x144,
+ }
+};
+
+static struct dpu_mdss_hw_init_handler cfg_handler[] = {
+ { .hw_rev = DPU_HW_VER_620,
+ .hw_reg_count = ARRAY_SIZE(hw_cfg),
+ .hw_cfg = hw_cfg
+ },
+};
+
+static void dpu_mdss_hw_init(struct dpu_mdss *dpu_mdss, u32 hw_rev)
+{
+ int i;
+ u32 count = 0;
+ struct dpu_hw_cfg *hw_cfg = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(cfg_handler); i++) {
+ if (cfg_handler[i].hw_rev == hw_rev) {
+ hw_cfg = cfg_handler[i].hw_cfg;
+ count = cfg_handler[i].hw_reg_count;
+ break;
+ }
+ }
+
+ for (i = 0; i < count; i++ ) {
+ writel_relaxed(hw_cfg->val,
+ dpu_mdss->mmio + hw_cfg->offset);
+ hw_cfg++;
+ }
+
+ return;
+}
+
static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
struct dpu_mdss *dpu_mdss)
{
@@ -174,12 +224,18 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = &dpu_mdss->mp;
int ret;
+ u32 mdss_rev;
dpu_mdss_icc_request_bw(mdss);
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
- if (ret)
+ if (ret) {
DPU_ERROR("clock enable failed, ret:%d\n", ret);
+ return ret;
+ }
+
+ mdss_rev = readl_relaxed(dpu_mdss->mmio + HW_REV);
+ dpu_mdss_hw_init(dpu_mdss, mdss_rev);
return ret;
}
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
