Re: [PATCH v6 4/5] drm/tidss: New driver for TI Keystone platform Display SubSystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/01/2020 14:22, Sam Ravnborg wrote:
> Hi Jyri.
> 
> On Wed, Jan 15, 2020 at 01:45:38PM +0200, Jyri Sarha wrote:
>> This patch adds a new DRM driver for Texas Instruments DSS IPs used on
>> Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
>> a major change to the older DSS IP versions, which are supported by
>> the omapdrm driver. While on higher level the Keystone DSS resembles
>> the older DSS versions, the registers are completely different and the
>> internal pipelines differ a lot.
>>
>> DSS IP found on K2G is an "ultra-light" version, and has only a single
>> plane and a single output. The K3 DSS IPs are found on AM65x and J721E
>> SoCs. AM65x DSS has two video ports, one full video plane, and another
>> "lite" plane without scaling support. J721E has 4 video ports, 2 video
>> planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
>> output.
>>
> ...
>> v6: - Check CTM and gamma support from dispc_features when creating crtc
>>     - Implement CTM support for k2g and fix k3 CTM implementation
>>     - Remove gamma property persistence and always write color properties
>>       in a new modeset
> 
> I applied this, just to throw this throgh my build setup.
> 
> checkpatch reported:
> total: 0 errors, 45 warnings, 46 checks, 4920 lines checked
> 
> - space after cast
> - CamelCase
> - Macro argument
> - length warnings
> - alignment
> 
> I would ignore the line length warnings for the coefficients, but fix the
> rest.
> 

You are using --subjective, or are there new warnings turned on since I
rebased?

Without it I only see long lines warnings and one "break is not useful
after a goto or return" that I had accidentally added there. We have not
cared too much of the long lines, but that is not a big deal, I'll fix them.

I had checked the subjective warnings too, but there I used some
consideration, if the warning would indicate a real problem.

Should I get rid off all the subjective warnings (apart from the long
lines in the coefficients)?

Best regards,
Jyri

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux