Thanks for the patch. Tested-by: Yannick Fertré <yannick.fertre@xxxxxx> BR Yannick Fertré On 1/10/20 10:21 AM, Thomas Zimmermann wrote:
The new callback get_scanout_position() reads the current location of the scanout process. The operation is currentyl located in struct drm_driver, but really belongs to the CRTC. Drivers will be converted in separate patches. Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx> --- drivers/gpu/drm/drm_vblank.c | 24 ++++++++---- include/drm/drm_drv.h | 7 +--- include/drm/drm_modeset_helper_vtables.h | 47 ++++++++++++++++++++++++ 3 files changed, 65 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c index 1659b13b178c..c12f0b333e14 100644 --- a/drivers/gpu/drm/drm_vblank.c +++ b/drivers/gpu/drm/drm_vblank.c @@ -30,6 +30,7 @@ #include <drm/drm_crtc.h> #include <drm/drm_drv.h> #include <drm/drm_framebuffer.h> +#include <drm/drm_modeset_helper_vtables.h> #include <drm/drm_print.h> #include <drm/drm_vblank.h> @@ -590,7 +591,7 @@ EXPORT_SYMBOL(drm_calc_timestamping_constants); * Implements calculation of exact vblank timestamps from given drm_display_mode * timings and current video scanout position of a CRTC. This can be directly * used as the &drm_driver.get_vblank_timestamp implementation of a kms driver - * if &drm_driver.get_scanout_position is implemented. + * if &drm_crtc_helper_funcs.get_scanout_position is implemented. * * The current implementation only handles standard video modes. For double scan * and interlaced modes the driver is supposed to adjust the hardware mode @@ -632,8 +633,9 @@ bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, } /* Scanout position query not supported? Should not happen. */ - if (!dev->driver->get_scanout_position) { - DRM_ERROR("Called from driver w/o get_scanout_position()!?\n"); + if (!dev->driver->get_scanout_position || + !crtc->helper_private->get_scanout_position) { + DRM_ERROR("Called from CRTC w/o get_scanout_position()!?\n"); return false; } @@ -664,11 +666,17 @@ bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, * Get vertical and horizontal scanout position vpos, hpos, * and bounding timestamps stime, etime, pre/post query. */ - vbl_status = dev->driver->get_scanout_position(dev, pipe, - in_vblank_irq, - &vpos, &hpos, - &stime, &etime, - mode); + if (crtc->helper_private->get_scanout_position) { + vbl_status = + crtc->helper_private->get_scanout_position( + crtc, in_vblank_irq, &vpos, &hpos, + &stime, &etime, mode); + } else { + vbl_status = + dev->driver->get_scanout_position( + dev, pipe, in_vblank_irq, &vpos, + &hpos, &stime, &etime, mode); + } /* Return as no-op if scanout query unsupported or failed. */ if (!vbl_status) { diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h index cf13470810a5..d0049e5786fc 100644 --- a/include/drm/drm_drv.h +++ b/include/drm/drm_drv.h @@ -362,11 +362,8 @@ struct drm_driver { * True on success, false if a reliable scanout position counter could * not be read out. * - * FIXME: - * - * Since this is a helper to implement @get_vblank_timestamp, we should - * move it to &struct drm_crtc_helper_funcs, like all the other - * helper-internal hooks. + * This is deprecated and should not be used by new drivers. + * Use &drm_crtc_helper_funcs.get_scanout_position instead. */ bool (*get_scanout_position) (struct drm_device *dev, unsigned int pipe, bool in_vblank_irq, int *vpos, int *hpos, diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index 5a87f1bd7a3f..e398512bfd5f 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -450,6 +450,53 @@ struct drm_crtc_helper_funcs { */ void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state); + + /** + * @get_scanout_position: + * + * Called by vblank timestamping code. + * + * Returns the current display scanout position from a CRTC and an + * optional accurate ktime_get() timestamp of when the position was + * measured. Note that this is a helper callback which is only used + * if a driver uses drm_calc_vbltimestamp_from_scanoutpos() for the + * @drm_driver.get_vblank_timestamp callback. + * + * Parameters: + * + * crtc: + * The CRTC. + * in_vblank_irq: + * True when called from drm_crtc_handle_vblank(). Some drivers + * need to apply some workarounds for gpu-specific vblank irq + * quirks if the flag is set. + * vpos: + * Target location for current vertical scanout position. + * hpos: + * Target location for current horizontal scanout position. + * stime: + * Target location for timestamp taken immediately before + * scanout position query. Can be NULL to skip timestamp. + * etime: + * Target location for timestamp taken immediately after + * scanout position query. Can be NULL to skip timestamp. + * mode: + * Current display timings. + * + * Returns vpos as a positive number while in active scanout area. + * Returns vpos as a negative number inside vblank, counting the number + * of scanlines to go until end of vblank, e.g., -1 means "one scanline + * until start of active scanout / end of vblank." + * + * Returns: + * + * True on success, false if a reliable scanout position counter could + * not be read out. + */ + bool (*get_scanout_position)(struct drm_crtc *crtc, + bool in_vblank_irq, int *vpos, int *hpos, + ktime_t *stime, ktime_t *etime, + const struct drm_display_mode *mode); }; /** |
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel