RK3228/RK3328 can only support clock rates defined in the pre pll table.
Lets validate the mode clock rate against the pre pll config and filter
out any mode with a clock rate returning error from clk_round_rate().
Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
---
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index fae38b323a0c..45fcdce3f27f 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -245,6 +245,22 @@ static void dw_hdmi_rockchip_encoder_disable(struct drm_encoder *encoder)
{
}
+static enum drm_mode_status
+dw_hdmi_rockchip_encoder_mode_valid(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode)
+{
+ struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder);
+ long rate;
+
+ if (hdmi->vpll_clk) {
+ rate = clk_round_rate(hdmi->vpll_clk, mode->clock * 1000);
+ if (rate < 0)
+ return MODE_CLOCK_RANGE;
+ }
+
+ return MODE_OK;
+}
+
static bool
dw_hdmi_rockchip_encoder_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
@@ -306,6 +322,7 @@ dw_hdmi_rockchip_encoder_atomic_check(struct drm_encoder *encoder,
}
static const struct drm_encoder_helper_funcs dw_hdmi_rockchip_encoder_helper_funcs = {
+ .mode_valid = dw_hdmi_rockchip_encoder_mode_valid,
.mode_fixup = dw_hdmi_rockchip_encoder_mode_fixup,
.mode_set = dw_hdmi_rockchip_encoder_mode_set,
.enable = dw_hdmi_rockchip_encoder_enable,
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
