On Thu, Jan 2, 2020 at 4:17 AM Sam Ravnborg <sam@xxxxxxxxxxxx> wrote: > > There is an increasing number of new simple panels. > Common for many of these simple panels are that they have one > mandatory power-supply and some of them have backlight and / or > an enable gpio. > > The binding file to describe these panels adds overhead > that really do not add value. > The binding are known and there is nothing gained from a > dedicated binding file nor for any dedicated example. > > The following patch introduces a single panel-simple.yaml > and converts two ampire bindings over to the new file. > > The conversion - if applied will have following effects: > > - The maintainer for the individual file will change > There is no need for many different maintainers for a simple binding. > We have the same situation with the panel-simple driver in the kernel. > > - The license will change to (GPL-2.0-only OR BSD-2-Clause) > There is usually only a single line copied from the original > file, a line that is often copied from a datasheet. > This license change should be acceptable considered what little > is copied. > If the license change is not OK we can use a dedicated binding > file in these cases. > > This is a follow-up on Rob's big patch converting a lot of panel bindings > to individual files: > > "dt-bindings: display: Convert a bunch of panels to DT schema" > https://patchwork.ozlabs.org/patch/1197683/ > > The objectives with one file for the relevant simple panels are: > - Make it simpler to add bindings for simple panels > - Keep the number of bindings file lower and thus easier to find a > relevant file to copy from when adding new panels. > - Keep the binding documentation for simple panels more consistent > - Make it simpler to add support for new panels > > v2: > - spelling fixes (imirkin via irc, Rob) > - updated description (Rob) > - list properires in alphabetical order > - added power-supply to example (Rob) > - updated title > - reworded changelog a little > > Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx> > Cc: Thierry Reding <thierry.reding@xxxxxxxxx> > Cc: Rob Herring <robh@xxxxxxxxxx> > Cc: Maxime Ripard <mripard@xxxxxxxxxx> > Cc: Yannick Fertre <yannick.fertre@xxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Cc: Daniel Vetter <daniel@xxxxxxxx> > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx > Cc: devicetree@xxxxxxxxxxxxxxx > --- > .../panel/ampire,am-480272h3tmqw-t01h.yaml | 42 ------------- > .../panel/ampire,am800480r3tmqwa1h.txt | 7 --- > .../bindings/display/panel/panel-simple.yaml | 59 +++++++++++++++++++ > 3 files changed, 59 insertions(+), 49 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml > delete mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt > create mode 100644 Documentation/devicetree/bindings/display/panel/panel-simple.yaml Reviewed-by: Rob Herring <robh@xxxxxxxxxx> _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel