Hi Linus On Sat, Jan 04, 2020 at 06:27:17PM +0100, Sam Ravnborg wrote: > Hi Linus. > > On Wed, Dec 25, 2019 at 12:56:09PM +0100, Linus Walleij wrote: > > This adds device tree bindings for the Novatek NT35510-based > > family of panels. Since several such panels are in existence > > we define bindings common for all, and define the compatible > > string for one certain panel (Hydis HVA40WV1). Reading this once more make me think that the right way to do this is to have two compatible's. enum - novatek,nt35510 - hydis,hva40wv1 So there shall be a match for both. Then we have explicit documented that this is the combination of a specific controller and a specific panel. Sam > > > > As other panels are discovered and investigated, we can add > > more compatibles to the binding. > > > > Cc: Stephan Gerhold <stephan@xxxxxxxxxxx> > > Cc: devicetree@xxxxxxxxxxxxxxx > > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > > --- > > .../display/panel/novatek-nt35510.yaml | 53 +++++++++++++++++++ > > 1 file changed, 53 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/panel/novatek-nt35510.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/panel/novatek-nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek-nt35510.yaml > > new file mode 100644 > > index 000000000000..a4a6b5adf15b > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/novatek-nt35510.yaml > > @@ -0,0 +1,53 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/panel/novatek-nt35510.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Novatek NT35510-based display panels > > + > > +maintainers: > > + - Linus Walleij <linus.walleij@xxxxxxxxxx> > > + > > +allOf: > > + - $ref: panel-common.yaml# > > + > > +properties: > > + compatible: > > + const: hydis,hva40wv1 > compatible fail to match filename - which is common practice. > And hydis is not a known vendor-prefix. > > > > + description: This indicates the panel manufacturer of the panel > > + that is in turn using the NT35510 panel driver. The compatible > > + string determines how the NT35510 panel driver shall be configured > > + to work with the indicated panel. > The description is just a general description of what compatible is used > for. > Please drop it as it does not provide anything specific for the panel. > > Sam > > > + reg: true > > + reset-gpios: true > > + vdd-supply: > > + description: regulator that supplies the vdd voltage > > + vddi-supply: > > + description: regulator that supplies the vddi voltage > > + backlight: true > > + > > +required: > > + - compatible > > + - reg > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + dsi@a0351000 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + panel { > > + compatible = "hydis,hva40wv1"; > > + reg = <0>; > > + vdd-supply = <&ab8500_ldo_aux4_reg>; > > + vddi-supply = <&ab8500_ldo_aux6_reg>; > > + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; > > + backlight = <&gpio_bl>; > > + }; > > + }; > > + > > +... > > -- > > 2.21.0 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@xxxxxxxxxxxxxxxxxxxxx > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
