Re: [PATCH v7] drm/panel: Add driver for Sony ACX424AKP panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Linus.

On Sat, Jan 04, 2020 at 01:10:26AM +0100, Linus Walleij wrote:
> The Sony ACX424AKP is a command/videomode DSI panel for
> mobile devices. It is used on the ST-Ericsson HREF520
> reference design. We support video mode by default, but
> it is possible to switch the panel into command mode
> by using the bool property "dsi-command-mode".
> 
> Cc: Stephan Gerhold <stephan@xxxxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Driver looks good but there are a few issues yet to address:
It does not build on top of drm-misc-next due to changes to the
drm_panel code.

And then there is a few checkpatch warnings that needs to be looked at:
-:25: WARNING:CONFIG_DESCRIPTION: please write a paragraph that describes the config symbol fully
#25: FILE: drivers/gpu/drm/panel/Kconfig:330:
+config DRM_PANEL_SONY_ACX424AKP

-:52: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#52:
new file mode 100644

-:307: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#307: FILE: drivers/gpu/drm/panel/panel-sony-acx424akp.c:251:
+	udelay(20);

-:310: WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst
#310: FILE: drivers/gpu/drm/panel/panel-sony-acx424akp.c:254:
+	msleep(11);

-:319: WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst
#319: FILE: drivers/gpu/drm/panel/panel-sony-acx424akp.c:263:
+	msleep(11);

-:543: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
#543: FILE: drivers/gpu/drm/panel/panel-sony-acx424akp.c:487:
+	acx->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						 GPIOD_OUT_HIGH);


The build errors was easy to fix - but please have a look at the other
warnings.

I did the following changes locally to fix the build.
But I did not try to look into the delay stuff.

	Sam

diff --git a/drivers/gpu/drm/panel/panel-sony-acx424akp.c b/drivers/gpu/drm/panel/panel-sony-acx424akp.c
index fe33f97cd812..38c83f5b16d5 100644
--- a/drivers/gpu/drm/panel/panel-sony-acx424akp.c
+++ b/drivers/gpu/drm/panel/panel-sony-acx424akp.c
@@ -407,17 +407,17 @@ static int acx424akp_disable(struct drm_panel *panel)
 	return 0;
 }
 
-static int acx424akp_get_modes(struct drm_panel *panel)
+static int acx424akp_get_modes(struct drm_panel *panel,
+			       struct drm_connector *connector)
 {
 	struct acx424akp *acx = panel_to_acx424akp(panel);
-	struct drm_connector *connector = panel->connector;
 	struct drm_display_mode *mode;
 
 	if (acx->video_mode)
-		mode = drm_mode_duplicate(panel->drm,
+		mode = drm_mode_duplicate(connector->dev,
 					  &sony_acx424akp_vid_mode);
 	else
-		mode = drm_mode_duplicate(panel->drm,
+		mode = drm_mode_duplicate(connector->dev,
 					  &sony_acx424akp_cmd_mode);
 	if (!mode) {
 		DRM_ERROR("bad mode or failed to add mode\n");
@@ -484,7 +484,7 @@ static int acx424akp_probe(struct mipi_dsi_device *dsi)
 
 	/* This asserts RESET by default */
 	acx->reset_gpio = devm_gpiod_get_optional(dev, "reset",
-						 GPIOD_OUT_HIGH);
+						  GPIOD_OUT_HIGH);
 	if (IS_ERR(acx->reset_gpio)) {
 		ret = PTR_ERR(acx->reset_gpio);
 		if (ret != -EPROBE_DEFER)
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux