Re: [PATCH 2/2] drm/panel: Add support for AUO B116XAK01 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob.

On Fri, Jan 03, 2020 at 10:30:24AM -0800, Rob Clark wrote:
> From: Rob Clark <robdclark@xxxxxxxxxxxx>
> 
> Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 32 ++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5d487686d25c..895a25cfc54f 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -680,6 +680,35 @@ static const struct panel_desc auo_b116xw03 = {
>  	},
>  };
>  
> +static const struct drm_display_mode auo_b116xak01_mode = {
> +	.clock = 69300,
> +	.hdisplay = 1366,
> +	.hsync_start = 1366 + 48,
> +	.hsync_end = 1366 + 48 + 32,
> +	.htotal = 1366 + 48 + 32 + 10,
> +	.vdisplay = 768,
> +	.vsync_start = 768 + 4,
> +	.vsync_end = 768 + 4 + 6,
> +	.vtotal = 768 + 4 + 6 + 15,
> +	.vrefresh = 60,
> +	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> +};
> +
> +static const struct panel_desc auo_b116xak01 = {
> +	.modes = &auo_b116xak01_mode,
> +	.num_modes = 1,
> +	.bpc = 6,
> +	.size = {
> +		.width = 256,
> +		.height = 144,
> +	},
> +	.delay = {
> +		.hpd_absent_delay = 200,
> +	},
> +	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> +	.connector_type = DRM_MODE_CONNECTOR_eDP,
> +};
Entries in alphabetical order - check.
.connector_type specified - check.
.flags and .bus_format specified - check.
.bus_flags not specified but optional - OK.

> +
>  static const struct drm_display_mode auo_b133xtn01_mode = {
>  	.clock = 69500,
>  	.hdisplay = 1366,
> @@ -3125,6 +3154,9 @@ static const struct of_device_id platform_of_match[] = {
>  	}, {
>  		.compatible = "auo,b133htn01",
>  		.data = &auo_b133htn01,
> +	}, {
> +		.compatible = "auo,b116xa01",
> +		.data = &auo_b116xak01,
This entry most also be in alphabetical order.

>  	}, {
>  		.compatible = "auo,b133xtn01",
>  		.data = &auo_b133xtn01,

Please fix and resend.

I am in general holding back on patches to panel-simple.
I hope we can reach a decision for the way forward with the bindings
files sometimes next week.

	Sam
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux