Re: [PATCH v2] phy: Add DisplayPort configuration options

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/12/2019 15:41, Yuti Amonkar wrote:
> Allow DisplayPort PHYs to be configured through the generic
> functions through a custom structure added to the generic union.
> The configuration structure is used for reconfiguration of
> DisplayPort PHYs during link training operation.
> 
> The parameters added here are the ones defined in the DisplayPort
> spec 1.4 which include link rate, number of lanes, voltage swing
> and pre-emphasis.
> 
> Signed-off-by: Yuti Amonkar <yamonkar@xxxxxxxxxxx>

I think we should also add phy mode for DisplayPort in this patch (or
series). e.g. something like this:

------------------------------------------------------------------
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index ba0aab59804f..79f25c8801f7 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -39,7 +39,8 @@ enum phy_mode {
        PHY_MODE_PCIE,
        PHY_MODE_ETHERNET,
        PHY_MODE_MIPI_DPHY,
-       PHY_MODE_SATA
+       PHY_MODE_SATA,
+       PHY_MODE_DISPLAYPORT
 };

 /**
------------------------------------------------------------------

Without it (and an associated phy_ops set_mode() call by the phy client)
the phy driver has no way to know how to interpret the "union
phy_configure_opts" in phy_ops configure() call.

Best regards,
Jyri

> ---
> 
> This patch was a part of [1] series earlier but we think that it needs
> to have a separate attention of the reviewers. Also as both [1] & [2] are
> dependent on this patch, our sincere request to reviewers to have a
> faster review of this patch.
> 
> [1]
> 
> https://lkml.org/lkml/2019/12/11/455
> 
> [2]
> 
> https://patchwork.kernel.org/cover/11271191/
> 
>  include/linux/phy/phy-dp.h | 95 ++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h    |  4 ++
>  2 files changed, 99 insertions(+)
>  create mode 100644 include/linux/phy/phy-dp.h
> 
> diff --git a/include/linux/phy/phy-dp.h b/include/linux/phy/phy-dp.h
> new file mode 100644
> index 0000000..18cad23
> --- /dev/null
> +++ b/include/linux/phy/phy-dp.h
> @@ -0,0 +1,95 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2019 Cadence Design Systems Inc.
> + */
> +
> +#ifndef __PHY_DP_H_
> +#define __PHY_DP_H_
> +
> +#include <linux/types.h>
> +
> +/**
> + * struct phy_configure_opts_dp - DisplayPort PHY configuration set
> + *
> + * This structure is used to represent the configuration state of a
> + * DisplayPort phy.
> + */
> +struct phy_configure_opts_dp {
> +	/**
> +	 * @link_rate:
> +	 *
> +	 * Link Rate, in Mb/s, of the main link.
> +	 *
> +	 * Allowed values: 1620, 2160, 2430, 2700, 3240, 4320, 5400, 8100 Mb/s
> +	 */
> +	unsigned int link_rate;
> +
> +	/**
> +	 * @lanes:
> +	 *
> +	 * Number of active, consecutive, data lanes, starting from
> +	 * lane 0, used for the transmissions on main link.
> +	 *
> +	 * Allowed values: 1, 2, 4
> +	 */
> +	unsigned int lanes;
> +
> +	/**
> +	 * @voltage:
> +	 *
> +	 * Voltage swing levels, as specified by DisplayPort specification,
> +	 * to be used by particular lanes. One value per lane.
> +	 * voltage[0] is for lane 0, voltage[1] is for lane 1, etc.
> +	 *
> +	 * Maximum value: 3
> +	 */
> +	unsigned int voltage[4];
> +
> +	/**
> +	 * @pre:
> +	 *
> +	 * Pre-emphasis levels, as specified by DisplayPort specification, to be
> +	 * used by particular lanes. One value per lane.
> +	 *
> +	 * Maximum value: 3
> +	 */
> +	unsigned int pre[4];
> +
> +	/**
> +	 * @ssc:
> +	 *
> +	 * Flag indicating, whether or not to enable spread-spectrum clocking.
> +	 *
> +	 */
> +	u8 ssc : 1;
> +
> +	/**
> +	 * @set_rate:
> +	 *
> +	 * Flag indicating, whether or not reconfigure link rate and SSC to
> +	 * requested values.
> +	 *
> +	 */
> +	u8 set_rate : 1;
> +
> +	/**
> +	 * @set_lanes:
> +	 *
> +	 * Flag indicating, whether or not reconfigure lane count to
> +	 * requested value.
> +	 *
> +	 */
> +	u8 set_lanes : 1;
> +
> +	/**
> +	 * @set_voltages:
> +	 *
> +	 * Flag indicating, whether or not reconfigure voltage swing
> +	 * and pre-emphasis to requested values. Only lanes specified
> +	 * by "lanes" parameter will be affected.
> +	 *
> +	 */
> +	u8 set_voltages : 1;
> +};
> +
> +#endif /* __PHY_DP_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 15032f14..ba0aab5 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -16,6 +16,7 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/regulator/consumer.h>
>  
> +#include <linux/phy/phy-dp.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  
>  struct phy;
> @@ -46,9 +47,12 @@ enum phy_mode {
>   *
>   * @mipi_dphy:	Configuration set applicable for phys supporting
>   *		the MIPI_DPHY phy mode.
> + * @dp:		Configuration set applicable for phys supporting
> + *		the DisplayPort protocol.
>   */
>  union phy_configure_opts {
>  	struct phy_configure_opts_mipi_dphy	mipi_dphy;
> +	struct phy_configure_opts_dp		dp;
>  };
>  
>  /**
> 


-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux