On 2019-12-30 11:05 a.m., Manna, Animesh wrote:
> On 24-12-2019 01:23, Harry Wentland wrote:
>>
>> On 2019-12-23 12:03 p.m., Animesh Manna wrote:
>>> During phy compliance auto test mode source need to read
>>> requested test pattern from sink through DPCD. After processing
>>> the request source need to set the pattern. So set/get method
>>> added in drm layer as it is DP protocol.
>>>
>>> v2: As per review feedback from Manasi on RFC version,
>>> - added dp revision as function argument in set_phy_pattern api.
>>> - used int for link_rate and u8 for lane_count to align with
>>> existing code.
>>>
>>> Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
>>> ---
>>> drivers/gpu/drm/drm_dp_helper.c | 93
>>> +++++++++++++++++++++++++++++++++
>>> include/drm/drm_dp_helper.h | 31 +++++++++++
>>> 2 files changed, 124 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/drm_dp_helper.c
>>> b/drivers/gpu/drm/drm_dp_helper.c
>>> index 2c7870aef469..91c80973aa83 100644
>>> --- a/drivers/gpu/drm/drm_dp_helper.c
>>> +++ b/drivers/gpu/drm/drm_dp_helper.c
>>> @@ -1371,3 +1371,96 @@ int
>>> drm_dp_dsc_sink_supported_input_bpcs(const u8
>>> dsc_dpcd[DP_DSC_RECEIVER_CAP_S
>>> return num_bpc;
>>> }
>>> EXPORT_SYMBOL(drm_dp_dsc_sink_supported_input_bpcs);
>>> +
>>> +/**
>>> + * drm_dp_get_phy_test_pattern() - get the requested pattern from
>>> the sink.
>>> + * @aux: DisplayPort AUX channel
>>> + * @data: DP phy compliance test parameters.
>>> + *
>>> + * Returns 0 on success or a negative error code on failure.
>>> + */
>>> +int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
>>> + struct drm_dp_phy_test_params *data)
>>> +{
>>> + int err;
>>> + u8 rate, lanes;
>>> +
>>> + err = drm_dp_dpcd_readb(aux, DP_TEST_LINK_RATE, &rate);
>>> + if (err < 0)
>>> + return err;
>>> + data->link_rate = drm_dp_bw_code_to_link_rate(rate);
>>> +
>>> + err = drm_dp_dpcd_readb(aux, DP_TEST_LANE_COUNT, &lanes);
>>> + if (err < 0)
>>> + return err;
>>> + data->num_lanes = lanes & DP_MAX_LANE_COUNT_MASK;
>>> +
>>> + if (lanes & DP_ENHANCED_FRAME_CAP)
>>> + data->enahanced_frame_cap = true;
>>> +
>>> + err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN,
>>> &data->phy_pattern);
>>> + if (err < 0)
>>> + return err;
>>> +
>>> + switch (data->phy_pattern) {
>>> + case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
>>> + err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
>>> + &data->custom80, 10);
>> Using sizeof(data->custom80) might be safer.
>>
>>> + if (err < 0)
>>> + return err;
>>> +
>>> + break;
>>> + case DP_PHY_TEST_PATTERN_CP2520:
>>> + err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
>>> + &data->hbr2_reset, 2);
>> Same here, using sizeof(data->hbr2_reset).
>>
>>> + if (err < 0)
>>> + return err;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL(drm_dp_get_phy_test_pattern);
>>> +
>>> +/**
>>> + * drm_dp_set_phy_test_pattern() - set the pattern to the sink.
>>> + * @aux: DisplayPort AUX channel
>>> + * @data: DP phy compliance test parameters.
>>> + *
>>> + * Returns 0 on success or a negative error code on failure.
>>> + */
>>> +int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
>>> + struct drm_dp_phy_test_params *data, u8 dp_rev)
>>> +{
>>> + int err, i;
>>> + u8 link_config[2];
>>> + u8 test_pattern;
>>> +
>>> + link_config[0] = drm_dp_link_rate_to_bw_code(data->link_rate);
>>> + link_config[1] = data->num_lanes;
>>> + if (data->enahanced_frame_cap)
>>> + link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
>>> + err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, link_config, 2);
>>> + if (err < 0)
>>> + return err;
>>> +
>>> + test_pattern = data->phy_pattern;
>>> + if (dp_rev < 0x12) {
>>> + test_pattern = (test_pattern << 2) &
>>> + DP_LINK_QUAL_PATTERN_11_MASK;
>>> + err = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET,
>>> + test_pattern);
>>> + if (err < 0)
>>> + return err;
>>> + } else {
>>> + for (i = 0; i < data->num_lanes; i++) {
>>> + err = drm_dp_dpcd_writeb(aux,
>>> + DP_LINK_QUAL_LANE0_SET + i,
>>> + test_pattern);
>>> + if (err < 0)
>>> + return err;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL(drm_dp_set_phy_test_pattern);
>>> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
>>> index d6e560870fb1..42a364748308 100644
>>> --- a/include/drm/drm_dp_helper.h
>>> +++ b/include/drm/drm_dp_helper.h
>>> @@ -700,6 +700,15 @@
>>> # define DP_TEST_COUNT_MASK 0xf
>>> #define DP_PHY_TEST_PATTERN 0x248
>>> +# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7
>>> +# define DP_PHY_TEST_PATTERN_NONE 0x0
>>> +# define DP_PHY_TEST_PATTERN_D10_2 0x1
>>> +# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2
>>> +# define DP_PHY_TEST_PATTERN_PRBS7 0x3
>>> +# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4
>>> +# define DP_PHY_TEST_PATTERN_CP2520 0x5
>>> +
>>> +#define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A
>>> #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250
>>> #define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251
>>> #define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252
>>> @@ -1570,4 +1579,26 @@ static inline void
>>> drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
>>> #endif
>>> +/**
>>> + * struct drm_dp_phy_test_params - DP Phy Compliance parameters
>>> + * @link: Link information.
>> @link seems to be from a previous patch version. Please describe
>> link_rate and num_lanes instead.
>>
>>> + * @phy_pattern: DP Phy test pattern from DPCD 0x248 (sink)
>>> + * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD
>>> + * 0x24A and 0x24B (sink)
>>> + * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250
>>> + * through 0x259.
>> Missing doc for enhanced_frame_cap.
>>
>>> + */
>>> +struct drm_dp_phy_test_params {
>>> + int link_rate;
>> Is there a reason you're not using u8 here? Would be nice to keep it
>> consistent with num_lanes.
>
> link_rate variable is used here to store actual clock value after
> multiplying with 27000 (0.27 gbps) with link-code using
> drm_dp_bw_code_to_link_rate().
> Followed the same and u8 maybe not be sufficient. Added other
> suggested changes. Thanks for review.
>
That makes sense. I missed that. In that case feel free to add my
Reviewed-by: Harry Wentland <harry.wentland@xxxxxxx>
Harry
> Regrads,
> Animesh
>
>>
>>> + u8 num_lanes;
>>> + u8 phy_pattern;
>>> + u8 hbr2_reset[2];
>>> + u8 custom80[10];
>>> + bool enahanced_frame_cap;
>> Typo. Should be enhanved_frame_cap.
>>
>> Harry
>>
>>> +};
>>> +
>>> +int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
>>> + struct drm_dp_phy_test_params *data);
>>> +int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
>>> + struct drm_dp_phy_test_params *data, u8 dp_rev);
>>> #endif /* _DRM_DP_HELPER_H_ */
>>>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
