Hello,
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote on Tue, 24 Dec 2019
15:05:51 +0100:
> Add support for the Satoz SAT050AT40H12R2 RGB panel.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
>
> Changes since v1:
> * Switched to display_timing's instead of display_mode.
>
> drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index ac6f6b5d200d..00538553a188 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2559,6 +2559,31 @@ static const struct panel_desc samsung_ltn140at29_301 = {
> },
> };
>
> +static const struct display_timing satoz_sat050at40h12r2_timing = {
> + .pixelclock = { 33300000, 33300000, 50000000 },
> + .hactive = {800, 800, 800},
> + .hfront_porch = {16, 210, 354},
> + .hback_porch = {46, 46, 46},
> + .hsync_len = {1, 1, 40},
> + .vactive = {480, 480, 480},
> + .vfront_porch = {7, 22, 147},
> + .vback_porch = {23, 23, 23},
> + .vsync_len = {1, 1, 20},
> +};
> +
> +static const struct panel_desc satoz_sat050at40h12r2 = {
> + .timings = &satoz_sat050at40h12r2_timing,
> + .num_timings = 1,
> + .bpc = 8,
> + .size = {
> + .width = 108,
> + .height = 65,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> + .reset_time = 10,
> + .reset_wait = 1,
I dit not generate the patch from the right branch: this is a proposal
for the reset GPIO change and should not appear here. Please forget
about this series, I will respin a v3 without these two lines.
Sorry for the noise.
Thanks,
Miquèl
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
