On Mon, Dec 16, 2019 at 03:16:23PM +0800, Hsin-Yi Wang wrote: > On Sat, Dec 14, 2019 at 5:29 AM Rob Herring <robh+dt@xxxxxxxxxx> wrote: > > > > On Wed, Dec 11, 2019 at 12:19 AM Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> wrote: > > > > > > From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx> > > > > > > Add bindings for Generic GPIO mux driver. > > > > > > Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx> > > > Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> > > > --- > > > Change from RFC to v1: > > > - txt to yaml > > > --- > > > .../bindings/display/bridge/gpio-mux.yaml | 89 +++++++++++++++++++ > > > 1 file changed, 89 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/display/bridge/gpio-mux.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/gpio-mux.yaml b/Documentation/devicetree/bindings/display/bridge/gpio-mux.yaml > > > new file mode 100644 > > > index 000000000000..cef098749066 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/display/bridge/gpio-mux.yaml > > > @@ -0,0 +1,89 @@ > > > +# SPDX-License-Identifier: GPL-2.0 > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/display/bridge/gpio-mux.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Generic display mux (1 input, 2 outputs) > > > > What makes it generic? Doesn't the mux chip have power supply, > > possibly a reset line or not, etc.? What about a mux where the GPIO > > controls the mux? > > > > Generally, we avoid 'generic' bindings because h/w is rarely generic. > > You can have a generic driver which works on multiple devices. > > > Then how about making it mt8173-oak-gpio-mux? Since this is currently > only used in this board. Isn't there an underlying part# you can use? Or if you can point me to multiple chips implementing the same thing, then maybe a generic binding is fine. Rob _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel