Re: [PATCH v21 1/2] Documentation: bridge: Add documentation for ps8640 DT properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Maxime,

Thanks for your comment, just preparing another version.

On 17/12/19 15:28, Maxime Ripard wrote:
> On Mon, Dec 16, 2019 at 02:58:33PM +0100, Enric Balletbo i Serra wrote:
>> From: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
>>
>> Add documentation for DT properties supported by
>> ps8640 DSI-eDP converter.
>>
>> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
>> Acked-by: Rob Herring <robh@xxxxxxxxxx>
>> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
>> Signed-off-by: Ulrich Hecht <uli@xxxxxxxx>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
>> ---
>>
>> Changes in v21: None
>> Changes in v19: None
>> Changes in v18: None
>> Changes in v17: None
>> Changes in v16: None
>> Changes in v15: None
>> Changes in v14: None
>> Changes in v13: None
>> Changes in v12: None
>> Changes in v11: None
>>
>>  .../bindings/display/bridge/ps8640.txt        | 44 +++++++++++++++++++
>>  1 file changed, 44 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ps8640.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.txt b/Documentation/devicetree/bindings/display/bridge/ps8640.txt
>> new file mode 100644
>> index 000000000000..7b13f92f7359
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.txt
>> @@ -0,0 +1,44 @@
>> +ps8640-bridge bindings
>> +
>> +Required properties:
>> +	- compatible: "parade,ps8640"
>> +	- reg: first page address of the bridge.
>> +	- sleep-gpios: OF device-tree gpio specification for PD pin.
>> +	- reset-gpios: OF device-tree gpio specification for reset pin.
>> +	- vdd12-supply: OF device-tree regulator specification for 1.2V power.
>> +	- vdd33-supply: OF device-tree regulator specification for 3.3V power.
>> +	- ports: The device node can contain video interface port nodes per
>> +		 the video-interfaces bind[1]. For port@0,set the reg = <0> as
>> +		 ps8640 dsi in and port@1,set the reg = <1> as ps8640 eDP out.
>> +
>> +Optional properties:
>> +	- mode-sel-gpios: OF device-tree gpio specification for mode-sel pin.
>> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
>> +
>> +Example:
>> +	edp-bridge@18 {
>> +		compatible = "parade,ps8640";
>> +		reg = <0x18>;
>> +		sleep-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
>> +		reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
>> +		mode-sel-gpios = <&pio 92 GPIO_ACTIVE_HIGH>;
>> +		vdd12-supply = <&ps8640_fixed_1v2>;
>> +		vdd33-supply = <&mt6397_vgp2_reg>;
>> +
>> +		ports {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			port@0 {
>> +				reg = <0>;
>> +				ps8640_in: endpoint {
>> +					remote-endpoint = <&dsi0_out>;
>> +				};
>> +			};
>> +			port@1 {
>> +				reg = <1>;
>> +				ps8640_out: endpoint {
>> +					remote-endpoint = <&panel_in>;
>> +				};
>> +			};
>> +		};
>> +	};
> 
> It's not really fair to ask this after the rough history of this
> patchset apparently, but bindings should be submitted in the YAML
> format now.
> 
> This wouldn't be nice to stop it from going in just because of this,
> so can you send a subsequent patch fixing this?
> 

I don't mind to use YAML format for next version, in fact, I think is the best.

Thanks,
 Enric


> Thanks!
> Maxime
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux