On Tue, Dec 17, 2019 at 12:01:26PM -0600, Jason Ekstrand wrote:
On Sun, Dec 15, 2019 at 10:24 PM Niranjan Vishwanathapura
<niranjana.vishwanathapura@xxxxxxxxx> wrote:
On Sat, Dec 14, 2019 at 10:31:37AM +0000, Chris Wilson wrote:
>Quoting Jason Ekstrand (2019-12-14 00:36:19)
>> On Fri, Dec 13, 2019 at 5:24 PM Niranjan Vishwanathapura <
>> niranjana.vishwanathapura@xxxxxxxxx> wrote:
>>
>> On Fri, Dec 13, 2019 at 04:58:42PM -0600, Jason Ekstrand wrote:
>> >
>> > +/**
>> > + * struct drm_i915_gem_vm_bind
>> > + *
>> > + * Bind an object in a vm's page table.
>> >
>> > First off, this is something I've wanted for a while for
Vulkan, it's
>> just
>> > never made its way high enough up the priority list.
However, it's
>> going
>> > to have to come one way or another soon. I'm glad to see
kernel API
>> for
>> > this being proposed.
>> > I do, however, have a few high-level comments/questions about
the API:
>> > 1. In order to be useful for sparse memory support, the API
has to go
>> the
>> > other way around so that it binds a VA range to a range
within the BO.
>> It
>> > also needs to be able to handle overlapping where two
different VA
>> ranges
>> > may map to the same underlying bytes in the BO. This likely
means that
>> > unbind needs to also take a VA range and only unbind that
range.
>> > 2. If this is going to be useful for managing GL's address
space where
>> we
>> > have lots of BOs, we probably want it to take a list of
ranges so we
>> > aren't making one ioctl for each thing we want to bind.
>>
>> Hi Jason,
>>
>> Yah, some of these requirements came up.
>>
>>
>> Yes, I have raised them every single time an API like this has come
across my
>> e-mail inbox for years and they continue to get ignored. Why are we
landing an
>> API that we know isn't the API we want especially when it's pretty
obvious
>> roughly what the API we want is? It may be less time in the short
term, but
>> long-term it means two ioctls and two implementations in i915, IGT
tests for
>> both code paths, and code in all UMDs to call one or the other
depending on
>> what kernel you're running on, and we have to maintain all that code
going
>> forward forever. Sure, that's a price we pay today for a variety of
things but
>> that's because they all seemed like the right thing at the time.
Landing the
>> wrong API when we know it's the wrong API seems foolish.
>
>Exactly. This is not even close to the uAPI we need. Reposting an RFC
>without taking in the concerns last time (or the time before that, or
>the time before that...) suggests that you aren't really requesting for
>comments at all.
Thanks Jason for detailed exlanation.
Chris, all comments and guidance are much appreciated :)
I haven't looked in detail, but my concern is that implementing
partial object binding (offset, lenght) from vma down to [un]binding
in ppgtt might be a lot of work to include in this SVM patch series.
I believe we need the partial object binding in non-SVM scenario
as well?
Yes, the Vulkan APIs require both partial binding and aliasing.
It may be worth pointing out that we're already doing some of this stuff
today, although in a rather backwards way. Our non-softpin model for
Vulkan uses a memfd which we then map in userspace and turn into a BO via
userptr. Due to the way we handle threading in the driver, we end up with
multiple BOs pointing to the same overlapping range in the memfd and hence
the same pages. That doesn't mean that everything in the path is already
set up for what you need but the VA -> page mappings should be. Also,
avoiding these kinds of shinanigans is exactly why we want a "real" kernel
API for this. :-)
Ok thanks Jason for the explantion.
Will look into supporting this here.
Ok, let me change the interface as below.
struct drm_i915_gem_vm_bind_va
{
/** VA start to bind **/
__u64 start;
/** Offset in Object to bind for I915_GEM_VM_BIND_SVM_OBJ type
**/
__u64 offset;
/** VA length to [un]bind **/
__u64 length;
/** Type of memory to [un]bind **/
__u32 type;
#define I915_GEM_VM_BIND_SVM_OBJ 0
#define I915_GEM_VM_BIND_SVM_BUFFER 1
/** Object handle to [un]bind for I915_GEM_VM_BIND_SVM_OBJ type
**/
__u32 handle;
/** Flags **/
__u32 flags;
#define I915_GEM_VM_BIND_UNBIND (1 << 0)
#define I915_GEM_VM_BIND_READONLY (1 << 1)
}
struct drm_i915_gem_vm_bind {
/** vm to [un]bind **/
__u32 vm_id;
/** number of VAs to bind **/
__u32 num_vas;
/** Array of VAs to bind **/
struct drm_i915_gem_vm_bind_va *bind_vas;
/** User extensions **/
__u64 extensions;
};
When synchronization control is added as extension, it applies to all
VAs in the array.
Does this looks good?
Yes, I think that header looks good. It's probably fine if
synchronization comes later.
I have two more questions (more for my own education than anything):
1. What is the difference between a SVM object and a buffer?
SVM object is the GEM BO. By buffer I mean system allocated memory (say malloc()).
I have some documentation in patch 01.
https://lists.freedesktop.org/archives/intel-gfx/2019-December/223481.html
2. I see a vm_id but there is no context. What (if any) are the
synchronization guarantees between the VM_BIND ioctl and EXECBUF? If I
VM_BIND followed by EXECBUF is it guaranteed to happen in that order?
What if I EXECBUF and then VM_BIND to unbind something? If I VM_BIND
while an execbuf is happening but I have some way of delaying the GPU work
from the CPU and I unblock it once the VM_BIND comes back, is that ok?
If those questions are answered by other patches, feel free to just point
me at them instead of answering in detail here.
Binding/unbinding is w.r.t to a device page table (hence the vm_id).
With current implementation, Yes, EXECBUF after the VM_BIND will see those binds
and ensure that those VA ranges are bound in device page table.
VM_BIND to bind/unbind after issuing EXECBUF which is alredy running (eg., endless
batch buffer), is not currently supported by this patch. But yes, I expect your
above scenario should be allowed and supported eventually.
I agree we need to set right expectation here for some of the use cases.
Let me look into this synchronization b/w two paths a bit more and sync with you.
Thanks,
Niranjana
--Jason
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
