At least Bay Trail (BYT) and Cherry Trail (CHT) devices can use 1 of 2
different PWM controllers for controlling the LCD's backlight brightness.
Either the one integrated into the PMIC or the one integrated into the
SoC (the 1st LPSS PWM controller).
So far in the LPSS code on BYT we have skipped registering the LPSS PWM
controller "pwm_backlight" lookup entry when a Crystal Cove PMIC is
present, assuming that in this case the PMIC PWM controller will be used.
On CHT we have been relying on only 1 of the 2 PWM controllers being
enabled in the DSDT at the same time; and always registered the lookup.
So far this has been working, but the correct way to determine which PWM
controller needs to be used is by checking a bit in the VBT table and
recently I've learned about 2 different BYT devices:
Point of View MOBII TAB-P800W
Acer Switch 10 SW5-012
Which use a Crystal Cove PMIC, yet the LCD is connected to the SoC/LPSS
PWM controller (and the VBT correctly indicates this), so here our old
heuristics fail.
This commit fixes using the wrong PWM controller on these devices by
calling pwm_get() for the right PWM controller based on the
VBT dsi.config.pwm_blc bit.
Note this is part of a series which contains 2 other patches which renames
the PWM lookup for the 1st SoC/LPSS PWM from "pwm_backlight" to
"pwm_pmic_backlight" and the PWM lookup for the Crystal Cove PMIC PWM
from "pwm_backlight" to "pwm_pmic_backlight".
Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_panel.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index bc14e9c0285a..ddcf311d1114 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -1840,13 +1840,22 @@ static int pwm_setup_backlight(struct intel_connector *connector,
enum pipe pipe)
{
struct drm_device *dev = connector->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_panel *panel = &connector->panel;
+ const char *desc;
int retval;
- /* Get the PWM chip for backlight control */
- panel->backlight.pwm = pwm_get(dev->dev, "pwm_backlight");
+ /* Get the right PWM chip for DSI backlight according to VBT */
+ if (dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC) {
+ panel->backlight.pwm = pwm_get(dev->dev, "pwm_pmic_backlight");
+ desc = "PMIC";
+ } else {
+ panel->backlight.pwm = pwm_get(dev->dev, "pwm_soc_backlight");
+ desc = "SoC";
+ }
+
if (IS_ERR(panel->backlight.pwm)) {
- DRM_ERROR("Failed to own the pwm chip\n");
+ DRM_ERROR("Failed to get the %s PWM chip\n", desc);
panel->backlight.pwm = NULL;
return -ENODEV;
}
@@ -1873,6 +1882,7 @@ static int pwm_setup_backlight(struct intel_connector *connector,
CRC_PMIC_PWM_PERIOD_NS);
panel->backlight.enabled = panel->backlight.level != 0;
+ DRM_INFO("Using %s PWM for LCD backlight control\n", desc);
return 0;
}
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
