Commit 82daca297506 ("drm/i915: Add "panel orientation" property to the panel connector, v6.") uses hardware state readback to determine if the GOP is rotating the image by 180 degrees to compensate for upside-down mounted panels. When I wrote that commit I tried to find the VBT bits the GOP used to decide to rotate the image, but I could not find them. Back then I only looked at the rotation bits in struct mipi_config and these read 0 on the 1 BYT device I have with an upside-down mounted panel (a GP-electronic T701 tablet). While working on a similar problem on a BYT device with an eDP panel I noticed that the new intel_dsi_get_panel_orientation() helper which gets used on newer SoCs (Apollo-Lake, etc.) checks the rotate_180 bit in the BDB_GENERAL_FEATURES VBT block. I've checked and this bit indeed is set on the GP-electronic T701 tablet, so using the generic intel_dsi_get_panel_orientation() helper there does the right thing without needing any extra readback of hw state. This commit removes the special handling of the panel orientation for DSI panels on BYT/CHT devices, bringing the handling in line with the handling of DSI panels on other devices. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/gpu/drm/i915/display/vlv_dsi.c | 55 +------------------------- 1 file changed, 1 insertion(+), 54 deletions(-) diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c index 0ca49b1604c6..18f7616e6c27 100644 --- a/drivers/gpu/drm/i915/display/vlv_dsi.c +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c @@ -1563,59 +1563,6 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = { .atomic_duplicate_state = intel_digital_connector_duplicate_state, }; -static enum drm_panel_orientation -vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector) -{ - struct drm_i915_private *dev_priv = to_i915(connector->base.dev); - struct intel_encoder *encoder = connector->encoder; - enum intel_display_power_domain power_domain; - enum drm_panel_orientation orientation; - struct intel_plane *plane; - struct intel_crtc *crtc; - intel_wakeref_t wakeref; - enum pipe pipe; - u32 val; - - if (!encoder->get_hw_state(encoder, &pipe)) - return DRM_MODE_PANEL_ORIENTATION_UNKNOWN; - - crtc = intel_get_crtc_for_pipe(dev_priv, pipe); - plane = to_intel_plane(crtc->base.primary); - - power_domain = POWER_DOMAIN_PIPE(pipe); - wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain); - if (!wakeref) - return DRM_MODE_PANEL_ORIENTATION_UNKNOWN; - - val = I915_READ(DSPCNTR(plane->i9xx_plane)); - - if (!(val & DISPLAY_PLANE_ENABLE)) - orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; - else if (val & DISPPLANE_ROTATE_180) - orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; - else - orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL; - - intel_display_power_put(dev_priv, power_domain, wakeref); - - return orientation; -} - -static enum drm_panel_orientation -vlv_dsi_get_panel_orientation(struct intel_connector *connector) -{ - struct drm_i915_private *dev_priv = to_i915(connector->base.dev); - enum drm_panel_orientation orientation; - - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { - orientation = vlv_dsi_get_hw_panel_orientation(connector); - if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) - return orientation; - } - - return intel_dsi_get_panel_orientation(connector); -} - static void vlv_dsi_add_properties(struct intel_connector *connector) { struct drm_i915_private *dev_priv = to_i915(connector->base.dev); @@ -1633,7 +1580,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector) connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT; connector->base.display_info.panel_orientation = - vlv_dsi_get_panel_orientation(connector); + intel_dsi_get_panel_orientation(connector); drm_connector_init_panel_orientation_property( &connector->base, connector->panel.fixed_mode->hdisplay, -- 2.23.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel