Hi Heiko,
Heiko Stübner <heiko@xxxxxxxxx> wrote on Fri, 13 Dec 2019 19:28:21
+0100:
> Hi Miquel,
>
> Am Freitag, 13. Dezember 2019, 19:10:49 CET schrieb Miquel Raynal:
> > Add the display subsystem routes with the two available CRTCs: vopb
> > and vopl (big and little). For each CRTC, add the LVDS endpoints. MIPI
> > DSI endpoints will come later.
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/rockchip/px30.dtsi | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
> > index b2af0f02ecbe..1c96ba556daf 100644
> > --- a/arch/arm64/boot/dts/rockchip/px30.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
> > @@ -190,6 +190,16 @@
> > compatible = "rockchip,display-subsystem";
> > ports = <&vopb_out>, <&vopl_out>;
> > status = "disabled";
> > +
> > + route {
> > + route_vopb_lvds: route-vopb-lvds {
> > + connect = <&vopb_out_lvds>;
> > + };
> > +
> > + route_vopl_lvds: route-vopl-lvds {
> > + connect = <&vopl_out_lvds>;
> > + };
> > + };
>
> where does this route-stuff come from?
> The vendor tree? Because so far I've not seen this in mainline-drm
> in general nor the Rockchip drm driver itself.
Yes it comes from the vendor tree, I added a few things from the vendor
tree in the "I really want this panel to work" phase and I forgot to
check if it could be removed, I'll probably drop this.
>
>
> > };
> >
> > gmac_clkin: external-gmac-clock {
> > @@ -976,6 +986,11 @@
> > vopb_out: port {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > +
> > + vopb_out_lvds: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&lvds_vopb_in>;
> > + };
>
> This (and the one below) would create dangling phandle references
> and compile errors, because the referenced phandles only get introduced
> in patch12. So ideally merge this into the last patch.
Actually patch 12 also references these nodes so I should merge them.
>
>
> Heiko
>
> > };
> > };
> >
> > @@ -1008,6 +1023,11 @@
> > vopl_out: port {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > +
> > + vopl_out_lvds: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&lvds_vopl_in>;
> > + };
> > };
> > };
> >
> >
>
>
>
>
Thanks for the review!
Miquèl
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
