On Wed, 11 Dec 2019, Hans de Goede wrote: > Hi Lee, > > On 10-12-2019 09:51, Lee Jones wrote: > > On Tue, 19 Nov 2019, Hans de Goede wrote: > > > > > At least Bay Trail (BYT) and Cherry Trail (CHT) devices can use 1 of 2 > > > different PWM controllers for controlling the LCD's backlight brightness. > > > > > > Either the one integrated into the PMIC or the one integrated into the > > > SoC (the 1st LPSS PWM controller). > > > > > > So far in the LPSS code on BYT we have skipped registering the LPSS PWM > > > controller "pwm_backlight" lookup entry when a Crystal Cove PMIC is > > > present, assuming that in this case the PMIC PWM controller will be used. > > > > > > On CHT we have been relying on only 1 of the 2 PWM controllers being > > > enabled in the DSDT at the same time; and always registered the lookup. > > > > > > So far this has been working, but the correct way to determine which PWM > > > controller needs to be used is by checking a bit in the VBT table and > > > recently I've learned about 2 different BYT devices: > > > Point of View MOBII TAB-P800W > > > Acer Switch 10 SW5-012 > > > > > > Which use a Crystal Cove PMIC, yet the LCD is connected to the SoC/LPSS > > > PWM controller (and the VBT correctly indicates this), so here our old > > > heuristics fail. > > > > > > Since only the i915 driver has access to the VBT, this commit renames > > > the "pwm_backlight" lookup entries for the Crystal Cove PMIC's PWM > > > controller to "pwm_pmic_backlight" so that the i915 driver can do a > > > pwm_get() for the right controller depending on the VBT bit, instead of > > > the i915 driver relying on a "pwm_backlight" lookup getting registered > > > which magically points to the right controller. > > > > > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > > > --- > > > drivers/mfd/intel_soc_pmic_core.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > For my own reference: > > Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx> > > As mentioned in the cover-letter, to avoid breaking bi-sectability > as well as to avoid breaking the intel-gfx CI we need to merge this series > in one go through one tree. Specifically through the drm-intel tree. > Is that ok with you ? > > If this is ok with you, then you do not have to do anything, I will just push > the entire series to drm-intel. drivers/mfd/intel_soc_pmic_core.c > does not see much changes so I do not expect this to lead to any conflicts. It's fine, so long as a minimal immutable pull-request is provided. Whether it's pulled or not will depend on a number of factors, but it needs to be an option. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
