Re: [PATCH v2] video: hdmi: indicate applicability in avi infoframe log

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 11, 2019 at 10:48:42AM +0100, Johan Korsnes wrote:
> When logging the AVI InfoFrame, clearly indicate whether or not
> attributes are active/"in effect". The specification is given in
> CTA-861-G Section 6.4: Format of Version 2, 3 & 4 AVI InfoFrames.
> 
> Attribute         Bytes    Requirement
> Ext. Colorimetry  EC0..EC2 Colorimetry (C0,C1) set to Extended.
> IT Contents Type  CN0,CN1  IT Content (ITC) set to True.
> RGB Quant. Range  Q0,Q1    Color Space (Y0..Y2) set to RGB.
> YCC Quant. Range  YQ0,YQ1  Color space (Y0..Y2) set to YCbCr.
> 
> Example log output with patch applied:
> HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
>     colorspace: RGB
>     scan mode: No Data
>     colorimetry: ITU709
>     picture aspect: 16:9
>     active aspect: Same as Picture
>     itc: IT Content
>     extended colorimetry: N/A (0x0)
>     quantization range: Full
>     nups: Unknown Non-uniform Scaling
>     video code: 16
>     ycc quantization range: N/A (0x0)
>     hdmi content type: Graphics
>     pixel repeat: 0
>     bar top 0, bottom 0, left 0, right 0
> 
> Signed-off-by: Johan Korsnes <jkorsnes@xxxxxxxxx>
> Cc: Hans Verkuil <hansverk@xxxxxxxxx>
> Cc: Martin Bugge <marbugge@xxxxxxxxx>
> 
> ---
> v1 -> v2:
>  * Indicate applicability not only for ext. colorimetry
> ---
>  drivers/video/hdmi.c | 40 ++++++++++++++++++++++++++++++++--------
>  1 file changed, 32 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
> index 9c82e2a0a411..491a77b28a9b 100644
> --- a/drivers/video/hdmi.c
> +++ b/drivers/video/hdmi.c
> @@ -1209,16 +1209,40 @@ static void hdmi_avi_infoframe_log(const char *level,
>  	hdmi_log("    active aspect: %s\n",
>  			hdmi_active_aspect_get_name(frame->active_aspect));
>  	hdmi_log("    itc: %s\n", frame->itc ? "IT Content" : "No Data");
> -	hdmi_log("    extended colorimetry: %s\n",
> -			hdmi_extended_colorimetry_get_name(frame->extended_colorimetry));
> -	hdmi_log("    quantization range: %s\n",
> -			hdmi_quantization_range_get_name(frame->quantization_range));
> +
> +	if (frame->colorimetry == HDMI_COLORIMETRY_EXTENDED)
> +		hdmi_log("    extended colorimetry: %s\n",
> +			 hdmi_extended_colorimetry_get_name(frame->extended_colorimetry));
> +	else
> +		hdmi_log("    extended colorimetry: N/A (0x%x)\n",
> +			 frame->extended_colorimetry);
> +
> +	if (frame->colorspace == HDMI_COLORSPACE_RGB)
> +		hdmi_log("    quantization range: %s\n",
> +			 hdmi_quantization_range_get_name(frame->quantization_range));
> +	else
> +		hdmi_log("    quantization range: N/A (0x%x)\n",
> +			 frame->quantization_range);
> +
>  	hdmi_log("    nups: %s\n", hdmi_nups_get_name(frame->nups));
>  	hdmi_log("    video code: %u\n", frame->video_code);
> -	hdmi_log("    ycc quantization range: %s\n",
> -			hdmi_ycc_quantization_range_get_name(frame->ycc_quantization_range));
> -	hdmi_log("    hdmi content type: %s\n",
> -			hdmi_content_type_get_name(frame->content_type));
> +
> +	if (frame->colorspace == HDMI_COLORSPACE_YUV422 ||
> +	    frame->colorspace == HDMI_COLORSPACE_YUV444 ||
> +	    frame->colorspace == HDMI_COLORSPACE_YUV420)

ocd nit: order 444||422||420 or 420||422||444

> +		hdmi_log("    ycc quantization range: %s\n",
> +			 hdmi_ycc_quantization_range_get_name(frame->ycc_quantization_range));
> +	else
> +		hdmi_log("    ycc quantization range: N/A (0x%x)\n",
> +			 frame->ycc_quantization_range);

CTA-861-G does recommend that we set YQ to match Q when trasmitting
RGB. So not sure "N/A" is entirely accurate here. However we also
found out that following that recommendation did break some crappy
sinks which get confused when they see RGB + YQ!=0. So now we follow
that recommendation only for HDMI 2.0+ sinks. Anyways, as long as the
raw value is present I guess we can stil spot such cases from the logs.

Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

> +
> +	if (frame->itc)
> +		hdmi_log("    hdmi content type: %s\n",
> +			 hdmi_content_type_get_name(frame->content_type));
> +	else
> +		hdmi_log("    hdmi content type: N/A (0x%x)\n",
> +			 frame->content_type);
> +
>  	hdmi_log("    pixel repeat: %u\n", frame->pixel_repeat);
>  	hdmi_log("    bar top %u, bottom %u, left %u, right %u\n",
>  			frame->top_bar, frame->bottom_bar,
> -- 
> 2.23.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux