+CCs that were accidnetally lost
On Tue, Dec 10, 2019 at 02:34:23PM -0800, Tom Anderson wrote:
> On Wed, Sep 25, 2019 at 04:54:59PM +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > We're going to need two cea mode tables (on for VICs < 128,
>
> s/on/one
>
> > another one for VICs >= 193). To that end replace the direct
> > edid_cea_modes[] lookups with a function call. And we'll rename
> > the array to edid_cea_modes_0[] to indicathe how it's to be
>
> s/indicathe/indicate
>
> > indexed.
> >
> > Cc: Hans Verkuil <hansverk@xxxxxxxxx>
> > Cc: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/drm_edid.c | 80 +++++++++++++++++++++++++++-----------
> > 1 file changed, 58 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > index 3c9703b08491..b700fc075257 100644
> > --- a/drivers/gpu/drm/drm_edid.c
> > +++ b/drivers/gpu/drm/drm_edid.c
> > @@ -707,12 +707,11 @@ static const struct minimode extra_modes[] = {
> > };
> >
> > /*
> > - * Probably taken from CEA-861 spec.
> > - * This table is converted from xorg's hw/xfree86/modes/xf86EdidModes.c.
> > + * From CEA/CTA-861 spec.
> > *
> > - * Index using the VIC.
> > + * Index with VIC.
> > */
> > -static const struct drm_display_mode edid_cea_modes[] = {
> > +static const struct drm_display_mode edid_cea_modes_0[] = {
>
> Nit: The "_0" suffix is a bit odd. Maybe edid_cea_modes_{lo,hi}, but I'm not
> sure if that's actually better. Up to you.
>
> > /* 0 - dummy, VICs start at 1 */
> > { },
> > /* 1 - 640x480@60Hz 4:3 */
> > @@ -3067,6 +3066,25 @@ static u8 *drm_find_cea_extension(const struct edid *edid)
> > return cea;
> > }
> >
> > +static const struct drm_display_mode *cea_mode_for_vic(u8 vic)
> > +{
> > + if (!vic)
> > + return NULL;
> > + if (vic < ARRAY_SIZE(edid_cea_modes_0))
> > + return &edid_cea_modes_0[vic];
> > + return NULL;
> > +}
> > +
> > +static u8 cea_num_vics(void)
> > +{
> > + return ARRAY_SIZE(edid_cea_modes_0);
> > +}
> > +
> > +static u8 cea_next_vic(u8 vic)
> > +{
> > + return vic + 1;
> > +}
> > +
> > /*
> > * Calculate the alternate clock for the CEA mode
> > * (60Hz vs. 59.94Hz etc.)
> > @@ -3104,14 +3122,14 @@ cea_mode_alternate_timings(u8 vic, struct drm_display_mode *mode)
> > * get the other variants by simply increasing the
> > * vertical front porch length.
> > */
> > - BUILD_BUG_ON(edid_cea_modes[8].vtotal != 262 ||
> > - edid_cea_modes[9].vtotal != 262 ||
> > - edid_cea_modes[12].vtotal != 262 ||
> > - edid_cea_modes[13].vtotal != 262 ||
> > - edid_cea_modes[23].vtotal != 312 ||
> > - edid_cea_modes[24].vtotal != 312 ||
> > - edid_cea_modes[27].vtotal != 312 ||
> > - edid_cea_modes[28].vtotal != 312);
> > + BUILD_BUG_ON(cea_mode_for_vic(8)->vtotal != 262 ||
> > + cea_mode_for_vic(9)->vtotal != 262 ||
> > + cea_mode_for_vic(12)->vtotal != 262 ||
> > + cea_mode_for_vic(13)->vtotal != 262 ||
> > + cea_mode_for_vic(23)->vtotal != 312 ||
> > + cea_mode_for_vic(24)->vtotal != 312 ||
> > + cea_mode_for_vic(27)->vtotal != 312 ||
> > + cea_mode_for_vic(28)->vtotal != 312);
> >
> > if (((vic == 8 || vic == 9 ||
> > vic == 12 || vic == 13) && mode->vtotal < 263) ||
> > @@ -3139,10 +3157,16 @@ static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_m
> > if (to_match->picture_aspect_ratio)
> > match_flags |= DRM_MODE_MATCH_ASPECT_RATIO;
> >
> > - for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) {
> > - struct drm_display_mode cea_mode = edid_cea_modes[vic];
> > + for (vic = 1; vic < cea_num_vics(); vic = cea_next_vic(vic)) {
> > + const struct drm_display_mode *mode = cea_mode_for_vic(vic);
> > + struct drm_display_mode cea_mode;
> > unsigned int clock1, clock2;
> >
> > + if (!mode)
> > + continue;
>
> Isn't this check is a no-op now that we have cea_next_vic()?
>
> > +
> > + cea_mode = *mode;
> > +
>
> Get rid of |cea_mode| and use *mode. There's only 1 place where cea_mode.*
> was used, and 3 places where &cea_mode was used, so using a pointer seems
> better.
>
> > /* Check both 60Hz and 59.94Hz */
> > clock1 = cea_mode.clock;
> > clock2 = cea_mode_alternate_clock(&cea_mode);
> > @@ -3178,10 +3202,16 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
> > if (to_match->picture_aspect_ratio)
> > match_flags |= DRM_MODE_MATCH_ASPECT_RATIO;
> >
> > - for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) {
> > - struct drm_display_mode cea_mode = edid_cea_modes[vic];
> > + for (vic = 1; vic < cea_num_vics(); vic = cea_next_vic(vic)) {
> > + const struct drm_display_mode *mode = cea_mode_for_vic(vic);
> > + struct drm_display_mode cea_mode;
> > unsigned int clock1, clock2;
> >
> > + if (!mode)
> > + continue;
> > +
> > + cea_mode = *mode;
> > +
>
> Same 2 comments as above.
>
> > /* Check both 60Hz and 59.94Hz */
> > clock1 = cea_mode.clock;
> > clock2 = cea_mode_alternate_clock(&cea_mode);
> > @@ -3202,7 +3232,7 @@ EXPORT_SYMBOL(drm_match_cea_mode);
> >
> > static bool drm_valid_cea_vic(u8 vic)
> > {
> > - return vic > 0 && vic < ARRAY_SIZE(edid_cea_modes);
> > + return cea_mode_for_vic(vic) != NULL;
> > }
> >
> > /**
> > @@ -3214,7 +3244,13 @@ static bool drm_valid_cea_vic(u8 vic)
> > */
> > enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code)
> > {
> > - return edid_cea_modes[video_code].picture_aspect_ratio;
> > + const struct drm_display_mode *mode;
> > +
> > + mode = cea_mode_for_vic(video_code);
>
> Nit: do declaration and assignment for |mode| on the same line?
>
> > + if (mode)
> > + return mode->picture_aspect_ratio;
> > +
> > + return HDMI_PICTURE_ASPECT_NONE;
> > }
> > EXPORT_SYMBOL(drm_get_cea_aspect_ratio);
> >
> > @@ -3323,7 +3359,7 @@ add_alternate_cea_modes(struct drm_connector *connector, struct edid *edid)
> > unsigned int clock1, clock2;
> >
> > if (drm_valid_cea_vic(vic)) {
> > - cea_mode = &edid_cea_modes[vic];
> > + cea_mode = cea_mode_for_vic(vic);
> > clock2 = cea_mode_alternate_clock(cea_mode);
> > } else {
> > vic = drm_match_hdmi_mode(mode);
> > @@ -3398,7 +3434,7 @@ drm_display_mode_from_vic_index(struct drm_connector *connector,
> > if (!drm_valid_cea_vic(vic))
> > return NULL;
> >
> > - newmode = drm_mode_duplicate(dev, &edid_cea_modes[vic]);
> > + newmode = drm_mode_duplicate(dev, cea_mode_for_vic(vic));
> > if (!newmode)
> > return NULL;
> >
> > @@ -3432,7 +3468,7 @@ static int do_y420vdb_modes(struct drm_connector *connector,
> > if (!drm_valid_cea_vic(vic))
> > continue;
> >
> > - newmode = drm_mode_duplicate(dev, &edid_cea_modes[vic]);
> > + newmode = drm_mode_duplicate(dev, cea_mode_for_vic(vic));
> > if (!newmode)
> > break;
> > bitmap_set(hdmi->y420_vdb_modes, vic, 1);
> > @@ -4001,7 +4037,7 @@ static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode)
> > vic = drm_match_cea_mode_clock_tolerance(mode, 5);
> > if (drm_valid_cea_vic(vic)) {
> > type = "CEA";
> > - cea_mode = &edid_cea_modes[vic];
> > + cea_mode = cea_mode_for_vic(vic);
> > clock1 = cea_mode->clock;
> > clock2 = cea_mode_alternate_clock(cea_mode);
> > } else {
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
