https://bugzilla.kernel.org/show_bug.cgi?id=201539 --- Comment #50 from MasterCATZ (mastercatz@xxxxxxxxxxx) --- Thanks for correction, I was unsure if $HWMON knew to go to hwmon1 works until GPU hits 70 deg then something forces "pwm1_enable" to auto and starts ramping the fan speed down until its 20% @ 90+ deg and bliping 100% @ 95 deg for now all I can do is run custom bios with 800 memory speed and 850 core and keep toggling between standard and performance mode on to reset fan speed to 100% and redo that every time its drops back below 40% and set /sys/class/drm/card1/device/hwmon/hwmon1/power1_cap to under 140w so the GPU does not cook so unless its "Radeon Profile" doing something to get locked out I have no idea its fan profile should be over 70 deg 1:1 ratio under 60 deg 50% under 50 deg 10% under 40 deg 5% under 20 deg 0% any way to find out what is accessing pwm1_enable ? -- You are receiving this mail because: You are watching the assignee of the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
