Re: [PATCH v3 19/21] drm/panel: simple: Add support for Toshiba LTA089AC29000 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2 Dec 2019 19:17:24 +0200
Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:

> Hi Boris,
> 
> Thank you for the patch.
> 
> On Wed, Oct 23, 2019 at 05:45:10PM +0200, Boris Brezillon wrote:
> > Add a new entry for the Toshiba LTA089AC29000 panel.
> > 
> > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> > ---
> > Changes in v3:
> > * None
> > ---
> >  drivers/gpu/drm/panel/panel-simple.c | 36 ++++++++++++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > index 5d487686d25c..27c92b44bd95 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -2937,6 +2937,39 @@ static const struct panel_desc toshiba_lt089ac29000 = {
> >  	.connector_type = DRM_MODE_CONNECTOR_LVDS,
> >  };
> >  
> > +static const struct drm_display_mode toshiba_lta089ac29000_mode = {
> > +	.clock = 79500,
> > +	.hdisplay = 1280,
> > +	.hsync_start = 1280 + 192,
> > +	.hsync_end = 1280 + 192 + 128,
> > +	.htotal = 1280 + 192 + 128 + 64,
> > +	.vdisplay = 768,
> > +	.vsync_start = 768 + 20,
> > +	.vsync_end = 768 + 20 + 7,
> > +	.vtotal = 768 + 20 + 7 + 3,
> > +	.vrefresh = 60,
> > +};
> > +
> > +static const struct panel_desc toshiba_lta089ac29000 = {
> > +	.modes = &toshiba_lta089ac29000_mode,
> > +	.num_modes = 1,
> > +	.size = {
> > +		.width = 194,
> > +		.height = 116,
> > +	},
> > +	/*
> > +	 * FIXME:
> > +	 * The panel supports 2 bus formats: jeida-24 and jeida-18. The
> > +	 * mode is selected through the 8b6b_SEL pin. If anyone ever needs
> > +	 * support for jeida-18 we should probably parse the 'data-mapping'
> > +	 * property.
> > +	 * In the unlikely event where 8b6b_SEL is connected to a GPIO, we'd
> > +	 * need a new infra to allow bus format negotiation at the panel level.
> > +	 */
> > +	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
> > +	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
> > +};
> > +
> >  static const struct drm_display_mode tpk_f07a_0102_mode = {
> >  	.clock = 33260,
> >  	.hdisplay = 800,
> > @@ -3392,6 +3425,9 @@ static const struct of_device_id platform_of_match[] = {
> >  	}, {
> >  		.compatible = "toshiba,lt089ac29000",
> >  		.data = &toshiba_lt089ac29000,
> > +	}, {
> > +		.compatible = "toshiba,lta089ac29000",  
> 
> Is this really different than "toshiba,lt089ac29000" ? Both have the
> exact same timing, the only difference is .bus_format, and according to
> https://www.avnet-integrated.eu/fileadmin/user_upload/Files/Displays/Colour_TFT/LT089AC29000.pdf
> the "toshiba,lt089ac29000" is an LVDS panel.

I think you can select the LVDS format on the LTA variant which you
can't do on the LT089AC29000. But I agree, LT089AC29000 is definitely
not an DPI/RGB panel. At the same time, changing the definition is
likely to break existing users :-(.

> 
> > +		.data = &toshiba_lta089ac29000,
> >  	}, {
> >  		.compatible = "tpk,f07a-0102",
> >  		.data = &tpk_f07a_0102,  
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux