Hi Fabrizio,
On Mon, Nov 25, 2019 at 11:17:25AM +0000, Fabrizio Castro wrote:
> On 22 November 2019 08:17 Geert Uytterhoeven wrote:
> > On Thu, Nov 21, 2019 at 5:00 PM Fabrizio Castro wrote:
> >> On 19 November 2019 21:52 Laurent Pinchart wrote:
> >>> On Tue, Nov 19, 2019 at 11:17:34AM +0000, Fabrizio Castro wrote:
> >>>> On 19 November 2019 00:16 Laurent Pinchart wrote:
> >>>>> On Wed, Nov 13, 2019 at 03:51:31PM +0000, Fabrizio Castro wrote:
> >>>>>> The lvds-codec driver is a generic stub for transparent LVDS
> >>>>>> encoders and decoders.
> >>>>>> It's good practice to list a device specific compatible string
> >>>>>> before the generic fallback (if any) in the DT node for the relevant
> >>>>>> LVDS encoder/decoder, and it's also required by the dt-bindings.
> >>>>>> A notable exception to the generic fallback mechanism is the case
> >>>>>> of "thine,thc63lvdm83d", as documented in:
> >>>>>> Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt
> >>>>>> This patch enforces the adoption of a device specific compatible
> >>>>>> string (as fist string in the list), by using markers for the
> >>>>>> compatible string we match against and the index of the matching
> >>>>>> compatible string in the list.
> >>>>>>
> >>>>>> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> >>>>>>
> >>>>>> ---
> >>>>>> Hi Laurent,
> >>>>>>
> >>>>>> I don't think we need to do anything in the driver to address your
> >>>>>> comment, as we can "enforce" this with the bindings (please see the
> >>>>>> next patch, as it would help with the "enforcing" of the compatible
> >>>>>> string for the thine device).
> >>>>>> I am sending this patch only so that you can see what a possible
> >>>>>> solution in the driver could look like.
> >>>>>>
> >>>>>> v3->v4:
> >>>>>> * New patch addressing the below comment from Laurent:
> >>>>>> "I think the lvds-decoder driver should error out at probe time if only
> >>>>>> one compatible string is listed."
> >>>>>>
> >>>>>> --- a/drivers/gpu/drm/bridge/lvds-codec.c
> >>>>>> +++ b/drivers/gpu/drm/bridge/lvds-codec.c
> >>>>>>
> >>>>>> @@ -65,7 +70,30 @@ static int lvds_codec_probe(struct platform_device *pdev)
> >>>>>> if (!lvds_codec)
> >>>>>> return -ENOMEM;
> >>>>>>
> >>>>>> - lvds_codec->connector_type = (u32)of_device_get_match_data(&pdev->dev);
> >>>>>> + lvds_codec->data = of_device_get_match_data(&pdev->dev);
> >>>>>> + if (!lvds_codec->data)
> >>>>>> + return -EINVAL;
> >>>>>> +
> >>>>>> + /*
> >>>>>> + * If we haven't matched a device specific compatible string, we need
> >>>>>> + * to work out if the generic compatible string we matched against was
> >>>>>> + * listed first in the compatible property.
> >>>>>> + */
> >>>>>
> >>>>> Can't we do this unconditionally, and thus drop the lvds_codec_data
> >>>>> structure ?
> >>>>
> >>>> I don't think so, and the reason for this is that we have a corner case for
> >>>> thine,thc63lvdm83d. Here is what's allowed (according to the documentation)
> >>>> from what's supported upstream (+ this series):
> >>>> "ti,ds90c185", "lvds-encoder"
> >>>> "ti,ds90c187", "lvds-encoder"
> >>>> "ti,sn75lvds83", "lvds-encoder"
> >>>> "ti,ds90cf384a", "lvds-decoder"
> >>>> "thine,thc63lvdm83d"
> >>>>
> >>>> As you can see from the examples above, in most cases it's enough to say it's
> >>>> all good when we match a compatible string with index > 0, but for the thine
> >>>> device you _have_ to match the string with index 0 as that's what's currently
> >>>> documented (please see thine,thc63lvdm83d.txt) and that's what's supported
> >>>> by device trees already (please see arch/arm/boot/dts/r8a7779-marzen.dts).
> >>>
> >>> How about the following logic ?
> >>>
> >>> if (match_index("lvds-encoder") == 0 ||
> >>> match_index("lvds-decoder") == 0)
> >>> return -EINVAL;
> >>>
> >>>
> >>
> >> Now I see what you mean
> >>
> >>>> This patch "classifies" compatible strings, and it considers a good match
> >>>> device specific compatible strings, or generic compatible strings as long
> >>>> as they are not listed first.
> >>>>
> >>>> These days you can leverage the yaml files to validate the device trees,
> >>>> therefore we should be focusing on writing yaml files in such a way we only
> >>>> pass the checks we mean to, and by checks I mean:
> >>>> make dtbs_check
> >>>>
> >>>> or more specifically, for this series:
> >>>> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> >>>>
> >>>> and that's of course on top of make dt_binding_check.
> >>>
> >>> Sure, but that doesn't prevent anyone ignoring the validation.
> >>>
> >>>> It's a very common requirement to have a part number specific compatible
> >>>> string first followed by a generic (fallback) compatible string in the device trees,
> >>>> most drivers for Renesas SoCs have similar requirements.
> >>>>
> >>>> If we start doing this here, we'll end up doing it elsewhere as well, and I really
> >>>> think we shouldn't, but others may see things differently, so I'll wait for others
> >>>> (and yourself with further comments) to jump in before doing any more work
> >>>> on this patch.
> >>>
> >>> I agree with this argument, it would set a precedent, and is probably
> >>> not worth duplicating similar code in all drivers. I wonder if this is
> >>> something we could handle with core helpers, but maybe it's overkill.
> >>
> >> I was hoping others would comment as well, but perhaps this topic is not too exciting.
> >>
> >> Geert, what do you think about this? Is this something we should enforce
> >> in drivers?
> >
> > So IIUIC, you want to enforce the presence of both specific and generic
> > compatible values (in that order) in the driver (except for
> > "thine,thc63lvdm83d", as that predates the introduction of the generic
> > compatible value)?
>
> Yeah, this is what Laurent would want ideally.
>
> > However, the driver would not really care about the actual hardware-specific
> > value, as it would still match against the generic one, and the
> > hardware-specific one may not even be listed in the driver's match table?
>
> Exactly.
>
> > By definition, you can have one or more compatible values listed in a
> > device node, from most-specific to least-specific. Typically the driver
> > cannot know if a more specific value is missing, but YAML DT binding
> > validation can.
> >
> > In this case it is a bit special, as there is a generic one involved, so
> > you can assume there should be a more specific one, too.
> > If you want to handle this in the core, you probably need to add an
> > "is_generic" flag to struct of_device_id.
>
> That's actually an interesting way of looking at this.
> Laurent?
I like the idea, it's better than doing it in each driver.
> > Rob/Mark?
Ping ?
> >>>>>> + if (!lvds_codec->data->device_specific) {
> >>>>>> + const struct of_device_id *match;
> >>>>>> + int compatible_index;
> >>>>>> +
> >>>>>> + match = of_match_node(dev->driver->of_match_table,
> >>>>>> + dev->of_node);
> >>>>>> + compatible_index = of_property_match_string(dev->of_node,
> >>>>>> + "compatible",
> >>>>>> + match->compatible);
> >>>>>> + if (compatible_index == 0) {
> >>>>>> + dev_err(dev, "Device specific compatible needed\n");
> >>>>>> + return -EINVAL;
> >
> > -ENODEV?
> > So a "more generic" driver can take over?
> >
> >>>>>> + }
> >>>>>> + }
> >>>>>> +
> >>>>>> lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
> >>>>>> GPIOD_OUT_HIGH);
> >>>>>> if (IS_ERR(lvds_codec->powerdown_gpio)) {
> >>>>>> @@ -92,7 +120,7 @@ static int lvds_codec_probe(struct platform_device *pdev)
> >>>>>>
> >>>>>> lvds_codec->panel_bridge =
> >>>>>> devm_drm_panel_bridge_add_typed(dev, panel,
> >>>>>> - lvds_codec->connector_type);
> >>>>>> + lvds_codec->data->connector_type);
> >>>>>> if (IS_ERR(lvds_codec->panel_bridge))
> >>>>>> return PTR_ERR(lvds_codec->panel_bridge);
> >>>>>>
> >>>>>> @@ -119,18 +147,33 @@ static int lvds_codec_remove(struct platform_device *pdev)
> >>>>>> return 0;
> >>>>>> }
> >>>>>>
> >>>>>> +static const struct lvds_codec_data lvds_codec_decoder_data = {
> >>>>>> + .connector_type = DRM_MODE_CONNECTOR_DPI,
> >>>>>> + .device_specific = false,
> >>>>>> +};
> >>>>>> +
> >>>>>> +static const struct lvds_codec_data lvds_codec_encoder_data = {
> >>>>>> + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> >>>>>> + .device_specific = false,
> >>>>>> +};
> >>>>>> +
> >>>>>> +static const struct lvds_codec_data lvds_codec_thc63lvdm83d_data = {
> >>>>>> + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> >>>>>> + .device_specific = true,
> >>>>>> +};
> >>>>>> +
> >>>>>> static const struct of_device_id lvds_codec_match[] = {
> >>>>>> {
> >>>>>> .compatible = "lvds-decoder",
> >>>>>> - .data = (void *)DRM_MODE_CONNECTOR_DPI,
> >>>>>> + .data = &lvds_codec_decoder_data,
> >>>>>> },
> >>>>>> {
> >>>>>> .compatible = "lvds-encoder",
> >>>>>> - .data = (void *)DRM_MODE_CONNECTOR_LVDS,
> >>>>>> + .data = &lvds_codec_encoder_data,
> >>>>>> },
> >>>>>> {
> >>>>>> .compatible = "thine,thc63lvdm83d",
> >>>>>> - .data = (void *)DRM_MODE_CONNECTOR_LVDS,
> >>>>>> + .data = &lvds_codec_thc63lvdm83d_data,
> >>>>>> },
> >>>>>> {},
> >>>>>> };
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
