I just realized that at 4:2:2, the pixel clock isn't actually decreased to 3/4
of it's value at 4:4:4. I'll send a revised patch on Monday.
On Fri, Nov 22, 2019 at 09:29:00PM -0800, Thomas Anderson wrote:
> For high-res (8K) or HFR (4K120) displays, using uncompressed pixel
> formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the
> "interesting" modes would be disabled, leaving only low-res or low
> framerate modes.
>
> This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS
> clock is exceeded. Verified that 8K30 and 4K120 are now available and
> working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700.
>
> Signed-off-by: Thomas Anderson <thomasanderson@xxxxxxxxxx>
> ---
> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 30 ++++++++++++++-----
> 1 file changed, 23 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index 4139f129eafb..a507a6f04c82 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -3269,13 +3269,15 @@ static void reduce_mode_colour_depth(struct dc_crtc_timing *timing_out)
> timing_out->display_color_depth--;
> }
>
> -static void adjust_colour_depth_from_display_info(struct dc_crtc_timing *timing_out,
> - const struct drm_display_info *info)
> +static void adjust_timing_from_display_info(
> + struct dc_crtc_timing *timing_out,
> + const struct drm_display_info *info,
> + const struct drm_display_mode *mode_in)
> {
> int normalized_clk;
> - if (timing_out->display_color_depth <= COLOR_DEPTH_888)
> + if (timing_out->display_color_depth < COLOR_DEPTH_888)
> return;
> - do {
> + while (timing_out->display_color_depth > COLOR_DEPTH_888) {
> normalized_clk = timing_out->pix_clk_100hz / 10;
> /* YCbCr 4:2:0 requires additional adjustment of 1/2 */
> if (timing_out->pixel_encoding == PIXEL_ENCODING_YCBCR420)
> @@ -3297,9 +3299,23 @@ static void adjust_colour_depth_from_display_info(struct dc_crtc_timing *timing_
> if (normalized_clk <= info->max_tmds_clock)
> return;
> reduce_mode_colour_depth(timing_out);
> + }
>
> - } while (timing_out->display_color_depth > COLOR_DEPTH_888);
> -
> + /* The color depth is 888 and cannot be reduced any further, but the
> + * clock would still exceed the max tmds clock. Try reducing the pixel
> + * encoding next.
> + */
> + if (timing_out->pixel_encoding == PIXEL_ENCODING_RGB ||
> + timing_out->pixel_encoding == PIXEL_ENCODING_YCBCR444) {
> + /* YCBCR422 is always supported. */
> + timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR422;
> + normalized_clk = (timing_out->pix_clk_100hz * 3) / 40;
> + if (normalized_clk <= info->max_tmds_clock)
> + return;
> + }
> + /* YCBCR420 may only be supported on specific modes. */
> + if (drm_mode_is_420_also(info, mode_in))
> + timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR420;
> }
>
> static void fill_stream_properties_from_drm_display_mode(
> @@ -3366,7 +3382,7 @@ static void fill_stream_properties_from_drm_display_mode(
> stream->out_transfer_func->type = TF_TYPE_PREDEFINED;
> stream->out_transfer_func->tf = TRANSFER_FUNCTION_SRGB;
> if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A)
> - adjust_colour_depth_from_display_info(timing_out, info);
> + adjust_timing_from_display_info(timing_out, info, mode_in);
> }
>
> static void fill_audio_info(struct audio_info *audio_info,
> --
> 2.24.0.432.g9d3f5f5b63-goog
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
