Re: [PATCH] Revert "drm/fbdev: Fallback to non tiled mode if all tiles not present"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 25, 2019 at 05:07:26PM +0200, Jani Nikula wrote:
> On Sat, 23 Nov 2019, Uma Shankar <uma.shankar@xxxxxxxxx> wrote:
> > This reverts commit f25c7a006cd1c07254780e3406e45cee4842b933.
> >
> > 2p2c display configuration blows up dmesg when one connector is
> > disconnected, causing issues in CI.
> >
> > Below are the sample errors thrown in logs:
> >
> > [IGT] core_getversion: executing
> > [IGT] core_getversion: exiting, ret=0
> > Setting dangerous option reset - tainting kernel
> > drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
> > drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
> > drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out
> > [drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out
> > [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
> > [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
> > [drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out
> > [drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out
> > Console: switching to colour frame buffer device 480x135
> > [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
> > [drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
> >
> > Reverting the change for now to unblock CI execution.
> >
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Dave Airlie <airlied@xxxxxxxxxx>
> > Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> 
> Pushed to drm-misc-next with Daniel's irc ack. Thanks for the
> revert. Back to the drawing board.
> 
> I was about to add the Bugzilla: reference, but this being a gitlab
> issue instead, I opted for the gitlab Closes: tag:
> 
> 	Closes: https://gitlab.freedesktop.org/drm/intel/issues/6
> 
> We should probably align on what we want to use going forward. And do we
> want to keep using Bugzilla for bugzilla bugs?

I guess we could/should have that discussion once we have the git repos on
gitlab too. Right now I don't think the above does anything ...

Aside from that I think this makes sense.
-Daniel

> 
> BR,
> Jani.
> 
> 
> > ---
> >  drivers/gpu/drm/drm_client_modeset.c | 70 ----------------------------
> >  1 file changed, 70 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
> > index f2150a0bac4c..895b73f23079 100644
> > --- a/drivers/gpu/drm/drm_client_modeset.c
> > +++ b/drivers/gpu/drm/drm_client_modeset.c
> > @@ -114,33 +114,6 @@ drm_client_find_modeset(struct drm_client_dev *client, struct drm_crtc *crtc)
> >  	return NULL;
> >  }
> >  
> > -static struct drm_display_mode *
> > -drm_connector_get_tiled_mode(struct drm_connector *connector)
> > -{
> > -	struct drm_display_mode *mode;
> > -
> > -	list_for_each_entry(mode, &connector->modes, head) {
> > -		if (mode->hdisplay == connector->tile_h_size &&
> > -		    mode->vdisplay == connector->tile_v_size)
> > -			return mode;
> > -	}
> > -	return NULL;
> > -}
> > -
> > -static struct drm_display_mode *
> > -drm_connector_fallback_non_tiled_mode(struct drm_connector *connector)
> > -{
> > -	struct drm_display_mode *mode;
> > -
> > -	list_for_each_entry(mode, &connector->modes, head) {
> > -		if (mode->hdisplay == connector->tile_h_size &&
> > -		    mode->vdisplay == connector->tile_v_size)
> > -			continue;
> > -		return mode;
> > -	}
> > -	return NULL;
> > -}
> > -
> >  static struct drm_display_mode *
> >  drm_connector_has_preferred_mode(struct drm_connector *connector, int width, int height)
> >  {
> > @@ -375,14 +348,8 @@ static bool drm_client_target_preferred(struct drm_connector **connectors,
> >  	struct drm_connector *connector;
> >  	u64 conn_configured = 0;
> >  	int tile_pass = 0;
> > -	int num_tiled_conns = 0;
> >  	int i;
> >  
> > -	for (i = 0; i < connector_count; i++) {
> > -		if (connectors[i]->has_tile)
> > -			num_tiled_conns++;
> > -	}
> > -
> >  retry:
> >  	for (i = 0; i < connector_count; i++) {
> >  		connector = connectors[i];
> > @@ -432,28 +399,6 @@ static bool drm_client_target_preferred(struct drm_connector **connectors,
> >  			list_for_each_entry(modes[i], &connector->modes, head)
> >  				break;
> >  		}
> > -		/*
> > -		 * In case of tiled mode if all tiles not present fallback to
> > -		 * first available non tiled mode.
> > -		 * After all tiles are present, try to find the tiled mode
> > -		 * for all and if tiled mode not present due to fbcon size
> > -		 * limitations, use first non tiled mode only for
> > -		 * tile 0,0 and set to no mode for all other tiles.
> > -		 */
> > -		if (connector->has_tile) {
> > -			if (num_tiled_conns <
> > -			    connector->num_h_tile * connector->num_v_tile ||
> > -			    (connector->tile_h_loc == 0 &&
> > -			     connector->tile_v_loc == 0 &&
> > -			     !drm_connector_get_tiled_mode(connector))) {
> > -				DRM_DEBUG_KMS("Falling back to non tiled mode on Connector %d\n",
> > -					      connector->base.id);
> > -				modes[i] = drm_connector_fallback_non_tiled_mode(connector);
> > -			} else {
> > -				modes[i] = drm_connector_get_tiled_mode(connector);
> > -			}
> > -		}
> > -
> >  		DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
> >  			  "none");
> >  		conn_configured |= BIT_ULL(i);
> > @@ -570,7 +515,6 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> >  	bool fallback = true, ret = true;
> >  	int num_connectors_enabled = 0;
> >  	int num_connectors_detected = 0;
> > -	int num_tiled_conns = 0;
> >  	struct drm_modeset_acquire_ctx ctx;
> >  
> >  	if (!drm_drv_uses_atomic_modeset(dev))
> > @@ -588,10 +532,6 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> >  	memcpy(save_enabled, enabled, count);
> >  	mask = GENMASK(count - 1, 0);
> >  	conn_configured = 0;
> > -	for (i = 0; i < count; i++) {
> > -		if (connectors[i]->has_tile)
> > -			num_tiled_conns++;
> > -	}
> >  retry:
> >  	conn_seq = conn_configured;
> >  	for (i = 0; i < count; i++) {
> > @@ -691,16 +631,6 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> >  				      connector->name);
> >  			modes[i] = &connector->state->crtc->mode;
> >  		}
> > -		/*
> > -		 * In case of tiled modes, if all tiles are not present
> > -		 * then fallback to a non tiled mode.
> > -		 */
> > -		if (connector->has_tile &&
> > -		    num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
> > -			DRM_DEBUG_KMS("Falling back to non tiled mode on Connector %d\n",
> > -				      connector->base.id);
> > -			modes[i] = drm_connector_fallback_non_tiled_mode(connector);
> > -		}
> >  		crtcs[i] = new_crtc;
> >  
> >  		DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
> 
> -- 
> Jani Nikula, Intel Open Source Graphics Center

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux