RE: [PATCH libdrm v4] modetest: Add support for setting mode having floating vertical refresh rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping. Just wanted to confirm if the patch is applied or anything still pending from my side ?

Also I tried to subscribe as per instructions at https://lists.freedesktop.org/mailman/listinfo/dri-devel 
Sometime back, but still not able to receive messages from mailing list. Is there any other way to subscribe ?

Regards,
Devarsh
> -----Original Message-----
> From: Devarsh Thakkar <devarsh.thakkar@xxxxxxxxxx>
> Sent: 15 November 2019 06:31
> To: dri-devel@xxxxxxxxxxxxxxxxxxxxx; ville.syrjala@xxxxxxxxxxxxxxx
> Cc: Hyun Kwon <hyunk@xxxxxxxxxx>; vcu-team <vcu-team@xxxxxxxxxx>;
> Ranganathan Sk <rsk@xxxxxxxxxx>; Dhaval Rajeshbhai Shah
> <dshah@xxxxxxxxxx>; Satish Kumar Nagireddy <SATISHNA@xxxxxxxxxx>;
> Varunkumar Allagadapa <VARUNKUM@xxxxxxxxxx>; Devarsh Thakkar
> <DEVARSHT@xxxxxxxxxx>
> Subject: [PATCH libdrm v4] modetest: Add support for setting mode having
> floating vertical refresh rate
> 
> For the scenario where user may require to modeset with a mode supporting
> a fractional value for vertical refresh-rate, appropriate mode can be selected
> by searching for mode having matching fractional vertical refresh rate using
> below equation.
> 
> vrefresh = (1000 * pixel clock) / (htotal * vtotal) Hz.
> 
> We do this way since driver doesn't return float value of vrefresh as it use int
> for vrefresh in struct drm_mode_info, but we can derive the actual value
> using pixel clock, horizontal total size and vertical total size values.
> 
> So for e.g. if user want to select mode having 59.94 Hz as refresh rate then
> with this patch it be can done as shown in below command, given there is an
> appropriate mode is available :
> 
> modetest -M xlnx -s 39:1920x1080-59.94@BG24 -v
> 
> NOTE: Above command was tested on xilinx DRM driver with DP monitor
> which was supporting mode having 59.94 Hz refresh rate.
> 
> V2: Update commit message
> V3: Update with below changes as per review comments :
>   1) Use epsilon for vrefresh comparison
>   2) Use implicit type-casting wherever possible
> V4: Keep patch version history on main commit message
> 
> Signed-off-by: Devarsh Thakkar <devarsh.thakkar@xxxxxxxxxx>
> Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  tests/modetest/modetest.c | 20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c index
> e66be66..b4edfcb 100644
> --- a/tests/modetest/modetest.c
> +++ b/tests/modetest/modetest.c
> @@ -54,6 +54,7 @@
>  #ifdef HAVE_SYS_SELECT_H
>  #include <sys/select.h>
>  #endif
> +#include <math.h>
> 
>  #include "xf86drm.h"
>  #include "xf86drmMode.h"
> @@ -795,7 +796,7 @@ struct pipe_arg {
>  	uint32_t crtc_id;
>  	char mode_str[64];
>  	char format_str[5];
> -	unsigned int vrefresh;
> +	float vrefresh;
>  	unsigned int fourcc;
>  	drmModeModeInfo *mode;
>  	struct crtc *crtc;
> @@ -822,11 +823,12 @@ struct plane_arg {
> 
>  static drmModeModeInfo *
>  connector_find_mode(struct device *dev, uint32_t con_id, const char
> *mode_str,
> -        const unsigned int vrefresh)
> +	const float vrefresh)
>  {
>  	drmModeConnector *connector;
>  	drmModeModeInfo *mode;
>  	int i;
> +	float mode_vrefresh;
> 
>  	connector = get_connector_by_id(dev, con_id);
>  	if (!connector || !connector->count_modes) @@ -839,9 +841,11
> @@ connector_find_mode(struct device *dev, uint32_t con_id, const char
> *mode_str,
>  			 * first mode that match with the name. Else, return
> the mode that match
>  			 * the name and the specified vertical refresh
> frequency.
>  			 */
> +			mode_vrefresh = mode->clock * 1000.00
> +					/ (mode->htotal * mode->vtotal);
>  			if (vrefresh == 0)
>  				return mode;
> -			else if (mode->vrefresh == vrefresh)
> +			else if (fabs(mode_vrefresh - vrefresh) < 0.005)
>  				return mode;
>  		}
>  	}
> @@ -1393,8 +1397,8 @@ static void atomic_set_mode(struct device *dev,
> struct pipe_arg *pipes, unsigned
>  		if (pipe->mode == NULL)
>  			continue;
> 
> -		printf("setting mode %s-%dHz on connectors ",
> -		       pipe->mode_str, pipe->mode->vrefresh);
> +		printf("setting mode %s-%.2fHz on connectors ",
> +		       pipe->mode_str, pipe->vrefresh);
>  		for (j = 0; j < pipe->num_cons; ++j) {
>  			printf("%s, ", pipe->cons[j]);
>  			add_property(dev, pipe->con_ids[j], "CRTC_ID", pipe-
> >crtc->crtc->crtc_id); @@ -1476,8 +1480,8 @@ static void set_mode(struct
> device *dev, struct pipe_arg *pipes, unsigned int co
>  		if (pipe->mode == NULL)
>  			continue;
> 
> -		printf("setting mode %s-%dHz@%s on connectors ",
> -		       pipe->mode_str, pipe->mode->vrefresh, pipe-
> >format_str);
> +		printf("setting mode %s-%.2fHz@%s on connectors ",
> +		       pipe->mode_str, pipe->vrefresh, pipe->format_str);
>  		for (j = 0; j < pipe->num_cons; ++j)
>  			printf("%s, ", pipe->cons[j]);
>  		printf("crtc %d\n", pipe->crtc->crtc->crtc_id); @@ -1713,7
> +1717,7 @@ static int parse_connector(struct pipe_arg *pipe, const char
> *arg)
>  	pipe->mode_str[len] = '\0';
> 
>  	if (*p == '-') {
> -		pipe->vrefresh = strtoul(p + 1, &endp, 10);
> +		pipe->vrefresh = strtof(p + 1, &endp);
>  		p = endp;
>  	}
> 
> --
> 2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux