Re: [PATCH v1 23/29] memory: tegra124-emc: Register as interconnect provider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



18.11.2019 23:02, Dmitry Osipenko пишет:
> EMC now provides MC with memory bandwidth using interconnect API.
> 
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
>  drivers/memory/tegra/tegra124-emc.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
> index 2c73260654ba..c9478dcbeece 100644
> --- a/drivers/memory/tegra/tegra124-emc.c
> +++ b/drivers/memory/tegra/tegra124-emc.c
> @@ -25,6 +25,7 @@
>  #define EMC_FBIO_CFG5				0x104
>  #define	EMC_FBIO_CFG5_DRAM_TYPE_MASK		0x3
>  #define	EMC_FBIO_CFG5_DRAM_TYPE_SHIFT		0
> +#define EMC_FBIO_CFG5_DRAM_WIDTH_X64		BIT(4)
>  
>  #define EMC_INTSTATUS				0x0
>  #define EMC_INTSTATUS_CLKCHANGE_COMPLETE	BIT(4)
> @@ -1080,11 +1081,28 @@ static void emc_debugfs_init(struct device *dev, struct tegra_emc *emc)
>  		dev_err(dev, "failed to create debugfs entry\n");
>  }
>  
> +static unsigned int emc_dram_data_bus_width_bytes(struct tegra_emc *emc)
> +{
> +	unsigned int bus_width;
> +	u32 emc_cfg;
> +
> +	emc_cfg = readl_relaxed(emc->regs + EMC_FBIO_CFG5);
> +	if (emc_cfg & EMC_FBIO_CFG5_DRAM_WIDTH_X64)
> +		bus_width = 64;
> +	else
> +		bus_width = 32;

Looks like I got a bit confused while was looking at TRMs before, seems
this width is unrelated to the EMC channel at all. I'll try to revisit
this again.

> +	dev_info(emc->dev, "DRAM data-bus width: %ubit\n", bus_width);
> +
> +	return bus_width / 8;
> +}
> +
>  static int tegra_emc_probe(struct platform_device *pdev)
>  {
>  	struct platform_device *mc;
>  	struct device_node *np;
>  	struct tegra_emc *emc;
> +	unsigned int bus_width;
>  	u32 ram_code;
>  	int err;
>  
> @@ -1146,6 +1164,12 @@ static int tegra_emc_probe(struct platform_device *pdev)
>  	if (IS_ENABLED(CONFIG_DEBUG_FS))
>  		emc_debugfs_init(&pdev->dev, emc);
>  
> +	bus_width = emc_dram_data_bus_width_bytes(emc);
> +
> +	err = tegra_icc_emc_setup_interconnect(&pdev->dev, bus_width);
> +	if (err)
> +		dev_err(&pdev->dev, "failed to initialize ICC: %d\n", err);
> +
>  	return 0;
>  };
>  
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux