On Thu, Nov 14, 2019 at 11:18:56AM +0530, Shubhashree Dhar wrote:
> Current code assumes that all the irqs registers offsets can be
> accessed in all the hw revisions; this is not the case for some
> targets that should not access some of the irq registers.
> This change adds the support to selectively remove the irqs that
> are not supported in some of the hw revisions.
>
> Change-Id: I6052b8237b703a1a9edd53893e04f7bd72223da1
> Signed-off-by: Shubhashree Dhar <dhar@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 22 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 1 +
> drivers/gpu/drm/panel/panel-visionox-rm69299.c | 478 ++++++++++++++++++++++
> 5 files changed, 500 insertions(+), 5 deletions(-)
> create mode 100644 drivers/gpu/drm/panel/panel-visionox-rm69299.c
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 04c8c44..357e15b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -421,6 +421,7 @@ static void sdm845_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> .reg_dma_count = 1,
> .dma_cfg = sdm845_regdma,
> .perf = sdm845_perf_data,
> + .mdss_irqs[0] = 0x3ff,
> };
> }
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index ec76b868..def8a3f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -646,6 +646,7 @@ struct dpu_perf_cfg {
> * @dma_formats Supported formats for dma pipe
> * @cursor_formats Supported formats for cursor pipe
> * @vig_formats Supported formats for vig pipe
> + * @mdss_irqs Bitmap with the irqs supported by the target
> */
> struct dpu_mdss_cfg {
> u32 hwversion;
> @@ -684,6 +685,8 @@ struct dpu_mdss_cfg {
> struct dpu_format_extended *dma_formats;
> struct dpu_format_extended *cursor_formats;
> struct dpu_format_extended *vig_formats;
> +
> + DECLARE_BITMAP(mdss_irqs, BITS_PER_BYTE * sizeof(long));
This is a very round about way of declaring an unsigned long. Do you ever
expect to have more than a long's worth of interrupt bits? If not, then just an
unsigned long mdss_irqs would be the preferred less macro-y way of doing this.
> };
>
> struct dpu_mdss_hw_cfg_handler {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> index 8bfa7d0..2a3634c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> @@ -800,7 +800,8 @@ static void dpu_hw_intr_dispatch_irq(struct dpu_hw_intr *intr,
> start_idx = reg_idx * 32;
> end_idx = start_idx + 32;
>
> - if (start_idx >= ARRAY_SIZE(dpu_irq_map) ||
> + if (!test_bit(reg_idx, &intr->irq_mask) ||
> + start_idx >= ARRAY_SIZE(dpu_irq_map) ||
> end_idx > ARRAY_SIZE(dpu_irq_map))
This last one will always be true since end_idx is always 32 bigger than
start_idx. If you add the start_idx check you no longer need the end_idx check.
> continue;
>
> @@ -955,8 +956,11 @@ static int dpu_hw_intr_clear_irqs(struct dpu_hw_intr *intr)
> if (!intr)
> return -EINVAL;
>
> - for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++)
> - DPU_REG_WRITE(&intr->hw, dpu_intr_set[i].clr_off, 0xffffffff);
> + for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++) {
> + if(test_bit(i, &intr->irq_mask))
> + DPU_REG_WRITE(&intr->hw,
> + dpu_intr_set[i].clr_off, 0xffffffff);
> + }
>
> /* ensure register writes go through */
> wmb();
> @@ -971,8 +975,11 @@ static int dpu_hw_intr_disable_irqs(struct dpu_hw_intr *intr)
> if (!intr)
> return -EINVAL;
>
> - for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++)
> - DPU_REG_WRITE(&intr->hw, dpu_intr_set[i].en_off, 0x00000000);
> + for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++) {
> + if(test_bit(i, &intr->irq_mask))
> + DPU_REG_WRITE(&intr->hw,
> + dpu_intr_set[i].en_off, 0x00000000);
> + }
>
> /* ensure register writes go through */
> wmb();
> @@ -991,6 +998,10 @@ static void dpu_hw_intr_get_interrupt_statuses(struct dpu_hw_intr *intr)
>
> spin_lock_irqsave(&intr->irq_lock, irq_flags);
> for (i = 0; i < ARRAY_SIZE(dpu_intr_set); i++) {
> +
This extra blank line isn't strictly needed if you don't want it.
> + if(!test_bit(i, &intr->irq_mask))
> + continue;
> +
> /* Read interrupt status */
> intr->save_irq_status[i] = DPU_REG_READ(&intr->hw,
> dpu_intr_set[i].status_off);
> @@ -1115,6 +1126,7 @@ struct dpu_hw_intr *dpu_hw_intr_init(void __iomem *addr,
> return ERR_PTR(-ENOMEM);
> }
>
> + intr->irq_mask = m->mdss_irqs[0];
>
> return intr;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> index 4edcf40..fc9c986 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> @@ -187,6 +187,7 @@ struct dpu_hw_intr {
> u32 *save_irq_status;
> u32 irq_idx_tbl_size;
> spinlock_t irq_lock;
> + unsigned long irq_mask;
This plus the chunk above would imply that, no, you never expect more than a
long's worth of interrupt bits.
> spin_lock_init(&intr->irq_lock);
> };
>
> /**
> diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
> new file mode 100644
> index 00000000..1bbd40d
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
Do you mean this file to be in this patch? The commit log doesn't make mention
of it and it doesn't seem to be related.
<snip>
Jordan
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
