On 10/2/19 6:06 PM, Krzysztof Kozlowski wrote: > Convert Generic Power Domain bindings to DT schema format using > json-schema. The consumer bindings are split to separate file. > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> For the media bindings: Acked-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx> Thanks! Hans > > --- > > Changes since v1: > 1. Select all nodes for consumers, > 2. Remove from consumers duplicated properties with dt-schema, > 3. Fix power domain pattern, > 4. Remove unneeded types. > --- > .../devicetree/bindings/arm/arm,scmi.txt | 2 +- > .../devicetree/bindings/arm/arm,scpi.txt | 2 +- > .../bindings/arm/freescale/fsl,scu.txt | 2 +- > .../bindings/clock/clk-exynos-audss.txt | 2 +- > .../bindings/clock/exynos5433-clock.txt | 4 +- > .../bindings/clock/renesas,cpg-mssr.txt | 2 +- > .../clock/renesas,r8a7778-cpg-clocks.txt | 2 +- > .../clock/renesas,r8a7779-cpg-clocks.txt | 2 +- > .../clock/renesas,rcar-gen2-cpg-clocks.txt | 2 +- > .../bindings/clock/renesas,rz-cpg-clocks.txt | 2 +- > .../bindings/clock/ti/davinci/psc.txt | 2 +- > .../bindings/display/etnaviv/etnaviv-drm.txt | 2 +- > .../devicetree/bindings/display/msm/dpu.txt | 2 +- > .../devicetree/bindings/display/msm/mdp5.txt | 2 +- > .../devicetree/bindings/dsp/fsl,dsp.yaml | 2 +- > .../firmware/nvidia,tegra186-bpmp.txt | 2 +- > .../bindings/media/imx7-mipi-csi2.txt | 3 +- > .../bindings/media/mediatek-jpeg-decoder.txt | 3 +- > .../bindings/media/mediatek-mdp.txt | 3 +- > .../bindings/opp/qcom-nvmem-cpufreq.txt | 2 +- > .../devicetree/bindings/pci/pci-keystone.txt | 2 +- > .../bindings/phy/ti,phy-am654-serdes.txt | 2 +- > .../bindings/power/amlogic,meson-gx-pwrc.txt | 2 +- > .../devicetree/bindings/power/fsl,imx-gpc.txt | 2 +- > .../bindings/power/fsl,imx-gpcv2.txt | 2 +- > .../power/power-domain-consumers.yaml | 105 +++++++++ > .../bindings/power/power-domain.yaml | 134 ++++++++++++ > .../bindings/power/power_domain.txt | 205 ------------------ > .../devicetree/bindings/power/qcom,rpmpd.txt | 2 +- > .../bindings/power/renesas,rcar-sysc.txt | 2 +- > .../bindings/power/renesas,sysc-rmobile.txt | 2 +- > .../bindings/power/xlnx,zynqmp-genpd.txt | 2 +- > .../bindings/soc/bcm/brcm,bcm2835-pm.txt | 2 +- > .../bindings/soc/mediatek/scpsys.txt | 2 +- > .../bindings/soc/ti/sci-pm-domain.txt | 2 +- > .../bindings/usb/nvidia,tegra124-xusb.txt | 4 +- > MAINTAINERS | 2 +- > 37 files changed, 278 insertions(+), 241 deletions(-) > create mode 100644 Documentation/devicetree/bindings/power/power-domain-consumers.yaml > create mode 100644 Documentation/devicetree/bindings/power/power-domain.yaml > delete mode 100644 Documentation/devicetree/bindings/power/power_domain.txt > > diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt > index 083dbf96ee00..f493d69e6194 100644 > --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt > +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt > @@ -100,7 +100,7 @@ Required sub-node properties: > > [0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt > -[2] Documentation/devicetree/bindings/power/power_domain.txt > +[2] Documentation/devicetree/bindings/power/power-domain.yaml > [3] Documentation/devicetree/bindings/thermal/thermal.txt > [4] Documentation/devicetree/bindings/sram/sram.txt > [5] Documentation/devicetree/bindings/reset/reset.txt > diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt > index 401831973638..7b83ef43b418 100644 > --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt > +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt > @@ -110,7 +110,7 @@ Required properties: > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt > [2] Documentation/devicetree/bindings/thermal/thermal.txt > [3] Documentation/devicetree/bindings/sram/sram.txt > -[4] Documentation/devicetree/bindings/power/power_domain.txt > +[4] Documentation/devicetree/bindings/power/power-domain.yaml > > Example: > > diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > index c149fadc6f47..6c8a61b971f1 100644 > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > @@ -124,7 +124,7 @@ Required properties for Pinctrl sub nodes: > CONFIG settings. > > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt > -[2] Documentation/devicetree/bindings/power/power_domain.txt > +[2] Documentation/devicetree/bindings/power/power-domain.yaml > [3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt > > RTC bindings based on SCU Message Protocol > diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt > index 6030afb10b5c..fda095e1fa7a 100644 > --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt > +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt > @@ -36,7 +36,7 @@ Required Properties: > Optional Properties: > > - power-domains: a phandle to respective power domain node as described by > - generic PM domain bindings (see power/power_domain.txt for more > + generic PM domain bindings (see power/power-domain-consumers.yaml for more > information). > > The following is the list of clocks generated by the controller. Each clock is > diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt > index 183c327a7d6b..52880914228d 100644 > --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt > +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt > @@ -178,8 +178,8 @@ Required Properties: > > Optional properties: > - power-domains: a phandle to respective power domain node as described by > - generic PM domain bindings (see power/power_domain.txt for more > - information). > + generic PM domain bindings (see power/power-domain-consumers.yaml > + for more information). > > Each clock is assigned an identifier and client nodes can use this identifier > to specify the clock which they consume. > diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt > index 916a601b76a7..2def42096886 100644 > --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt > +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt > @@ -59,7 +59,7 @@ Required Properties: > power-managed through Module Standby should refer to the CPG device > node in their "power-domains" property, as documented by the generic PM > Domain bindings in > - Documentation/devicetree/bindings/power/power_domain.txt. > + Documentation/devicetree/bindings/power/power-domain.yaml. > > - #reset-cells: Must be 1 > - The single reset specifier cell must be the module number, as defined > diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt > index 7cc4c0330b53..be24c2c023a2 100644 > --- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt > +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt > @@ -17,7 +17,7 @@ Required Properties: > SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed > through an MSTP clock should refer to the CPG device node in their > "power-domains" property, as documented by the generic PM domain bindings in > -Documentation/devicetree/bindings/power/power_domain.txt. > +Documentation/devicetree/bindings/power/power-domain-consumers.yaml. > > > Examples > diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt > index 8c81547c29f5..263d7ef2e6de 100644 > --- a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt > +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt > @@ -19,7 +19,7 @@ Required Properties: > SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed > through an MSTP clock should refer to the CPG device node in their > "power-domains" property, as documented by the generic PM domain bindings in > -Documentation/devicetree/bindings/power/power_domain.txt. > +Documentation/devicetree/bindings/power/power-domain-consumers.yaml. > > > Examples > diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt > index f8c05bb4116e..8c06a93ab730 100644 > --- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt > +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt > @@ -28,7 +28,7 @@ Required Properties: > SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed > through an MSTP clock should refer to the CPG device node in their > "power-domains" property, as documented by the generic PM domain bindings in > -Documentation/devicetree/bindings/power/power_domain.txt. > +Documentation/devicetree/bindings/power/power-domain-consumers.yaml. > > > Examples > diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt > index 8ff3e2774ed8..56d632165030 100644 > --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt > +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt > @@ -21,7 +21,7 @@ Required Properties: > SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed > through an MSTP clock should refer to the CPG device node in their > "power-domains" property, as documented by the generic PM domain bindings in > -Documentation/devicetree/bindings/power/power_domain.txt. > +Documentation/devicetree/bindings/power/power-domain-consumers.yaml. > > > Examples > diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt > index dae4ad8e198c..5f746ebf7a2c 100644 > --- a/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt > +++ b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt > @@ -67,5 +67,5 @@ Examples: > > Also see: > - Documentation/devicetree/bindings/clock/clock-bindings.txt > -- Documentation/devicetree/bindings/power/power_domain.txt > +- Documentation/devicetree/bindings/power/power-domain.yaml > - Documentation/devicetree/bindings/reset/reset.txt > diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt > index 8def11b16a24..6067ef3f108a 100644 > --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt > +++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt > @@ -20,7 +20,7 @@ Required properties: > > Optional properties: > - power-domains: a power domain consumer specifier according to > - Documentation/devicetree/bindings/power/power_domain.txt > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml > > example: > > diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt > index a61dd40f3792..002a3a1270f9 100644 > --- a/Documentation/devicetree/bindings/display/msm/dpu.txt > +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt > @@ -13,7 +13,7 @@ Required properties: > - reg-names: register region names. The following region is required: > * "mdss" > - power-domains: a power domain consumer specifier according to > - Documentation/devicetree/bindings/power/power_domain.txt > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml > - clocks: list of clock specifiers for clocks needed by the device. > - clock-names: device clock names, must be in same order as clocks property. > The following clocks are required: > diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt > index 4e11338548aa..9cbfcdfa46b4 100644 > --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt > +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt > @@ -19,7 +19,7 @@ Required properties: > - #interrupt-cells: specifies the number of cells needed to encode an interrupt > source, should be 1. > - power-domains: a power domain consumer specifier according to > - Documentation/devicetree/bindings/power/power_domain.txt > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml > - clocks: device clocks. See ../clocks/clock-bindings.txt for details. > - clock-names: the following clocks are required. > * "iface" > diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > index 3248595dc93c..d7680b7fbe19 100644 > --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > @@ -36,7 +36,7 @@ properties: > power-domains: > description: > List of phandle and PM domain specifier as documented in > - Documentation/devicetree/bindings/power/power_domain.txt > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml > maxItems: 4 > > mboxes: > diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt > index ff380dadb5f9..e44a13bc06ed 100644 > --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt > +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt > @@ -32,7 +32,7 @@ implemented by this node: > > - .../clock/clock-bindings.txt > - <dt-bindings/clock/tegra186-clock.h> > -- ../power/power_domain.txt > +- ../power/power-domain.yaml > - <dt-bindings/power/tegra186-powergate.h> > - .../reset/reset.txt > - <dt-bindings/reset/tegra186-reset.h> > diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > index 71fd74ed3ec8..7a7a8b672983 100644 > --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > +++ b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > @@ -17,7 +17,8 @@ Required properties: > - clock-names : must contain "pclk", "wrap" and "phy" entries, matching > entries in the clock property; > - power-domains : a phandle to the power domain, see > - Documentation/devicetree/bindings/power/power_domain.txt for details. > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml > + for details. > - reset-names : should include following entry "mrst"; > - resets : a list of phandle, should contain reset entry of > reset-names; > diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt > index 044b11913c49..04c46adaa460 100644 > --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt > +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt > @@ -14,7 +14,8 @@ Required properties: > Documentation/devicetree/bindings/clock/clock-bindings.txt for details. > - clock-names: must contain "jpgdec-smi" and "jpgdec". > - power-domains: a phandle to the power domain, see > - Documentation/devicetree/bindings/power/power_domain.txt for details. > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml > + for details. > - mediatek,larb: must contain the local arbiters in the current Socs, see > Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt > for details. > diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt > index 0d03e3ae2be2..5a8c9ab9b3bd 100644 > --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt > +++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt > @@ -17,7 +17,8 @@ Required properties (all function blocks, child node): > - clocks: device clocks, see > Documentation/devicetree/bindings/clock/clock-bindings.txt for details. > - power-domains: a phandle to the power domain, see > - Documentation/devicetree/bindings/power/power_domain.txt for details. > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml > + for details. > > Required properties (DMA function blocks, child node): > - compatible: Should be one of > diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt > index 4751029b9b74..cb091b2ce5db 100644 > --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt > +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt > @@ -27,7 +27,7 @@ In 'cpu' nodes: > - power-domains: A phandle pointing to the PM domain specifier which provides > the performance states available for active state management. > Please refer to the power-domains bindings > - Documentation/devicetree/bindings/power/power_domain.txt > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml > and also examples below. > - power-domain-names: Should be > - 'cpr' for qcs404. > diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt > index 47202a2938f2..5ee0bf171ce6 100644 > --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt > +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt > @@ -88,7 +88,7 @@ num-ob-windows: As specified in > num-lanes: As specified in > Documentation/devicetree/bindings/pci/designware-pcie.txt > power-domains: As documented by the generic PM domain bindings in > - Documentation/devicetree/bindings/power/power_domain.txt. > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml. > ti,syscon-pcie-mode: phandle to the device control module required to configure > PCI in either RC mode or EP mode. > > diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt > index 64b286d2d398..b5f17a3e8dba 100644 > --- a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt > +++ b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt > @@ -17,7 +17,7 @@ Required properties: > 1 - PCIe0 Lane1 > 2 - ICSS2 SGMII Lane1 > - power-domains: As documented by the generic PM domain bindings in > - Documentation/devicetree/bindings/power/power_domain.txt. > + Documentation/devicetree/bindings/power/power-domain-consumers.yaml. > - clocks: List of clock-specifiers representing the input to the SERDES. > Should have 3 items representing the left input clock, external > reference clock and right input clock in that order. > diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt > index 0fdc3dd1125e..99b5b10cda31 100644 > --- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt > +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt > @@ -10,7 +10,7 @@ The Video Processing Unit power domain is controlled by this power controller, > but the domain requires some external resources to meet the correct power > sequences. > The bindings must respect the power domain bindings as described in the file > -power_domain.txt > +power-domain.yaml > > Device Tree Bindings: > --------------------- > diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt > index 726ec2875223..f0f5553a9e74 100644 > --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt > +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt > @@ -19,7 +19,7 @@ Required properties: > - ipg > > The power domains are generic power domain providers as documented in > -Documentation/devicetree/bindings/power/power_domain.txt. They are described as > +Documentation/devicetree/bindings/power/power-domain.yaml. They are described as > subnodes of the power gating controller 'pgc' node of the GPC and should > contain the following: > > diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt > index 7c7e972aaa42..61649202f6f5 100644 > --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt > +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt > @@ -17,7 +17,7 @@ Required properties: > > Power domains contained within GPC node are generic power domain > providers, documented in > -Documentation/devicetree/bindings/power/power_domain.txt, which are > +Documentation/devicetree/bindings/power/power-domain.yaml, which are > described as subnodes of the power gating controller 'pgc' node, > which, in turn, is expected to contain the following: > > diff --git a/Documentation/devicetree/bindings/power/power-domain-consumers.yaml b/Documentation/devicetree/bindings/power/power-domain-consumers.yaml > new file mode 100644 > index 000000000000..f65078e1260e > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/power-domain-consumers.yaml > @@ -0,0 +1,105 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/power-domain-consumers.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: PM domain consumers > + > +maintainers: > + - Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> > + - Kevin Hilman <khilman@xxxxxxxxxx> > + - Ulf Hansson <ulf.hansson@xxxxxxxxxx> > + > +description: |+ > + See power-domain.yaml > + > +select: true > + > +allOf: > + - $ref: /schemas/power-domain/power-domain-consumer.yaml > + > +properties: > + required-opps: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + This contains phandle to an OPP node in another device's OPP table. > + It may contain an array of phandles, where each phandle points to an OPP > + of a different device. It should not contain multiple phandles to the OPP > + nodes in the same OPP table. This specifies the minimum required OPP > + of the device(s), whose OPP's phandle is present in this property, > + for the functioning of the current device at the current OPP (where this > + property is present). > + > +examples: > + - | > + leaky-device@12350000 { > + compatible = "foo,i-leak-current"; > + reg = <0x12350000 0x1000>; > + power-domains = <&power 0>; > + power-domain-names = "io"; > + }; > + > + leaky-device@12351000 { > + compatible = "foo,i-leak-current"; > + reg = <0x12351000 0x1000>; > + power-domains = <&power 0>, <&power 1> ; > + power-domain-names = "io", "clk"; > + }; > + > + // The first example above defines a typical PM domain consumer device, which is > + // located inside a PM domain with index 0 of a power controller represented by a > + // node with the label "power". > + // In the second example the consumer device are partitioned across two PM domains, > + // the first with index 0 and the second with index 1, of a power controller that > + // is represented by a node with the label "power". > + > + - | > + // Example with OPP table for domain provider that provides two domains: > + > + domain0_opp_table: opp-table0 { > + compatible = "operating-points-v2"; > + > + domain0_opp_0: opp-1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-microvolt = <975000 970000 985000>; > + }; > + domain0_opp_1: opp-1100000000 { > + opp-hz = /bits/ 64 <1100000000>; > + opp-microvolt = <1000000 980000 1010000>; > + }; > + }; > + > + domain1_opp_table: opp-table1 { > + compatible = "operating-points-v2"; > + > + domain1_opp_0: opp-1200000000 { > + opp-hz = /bits/ 64 <1200000000>; > + opp-microvolt = <975000 970000 985000>; > + }; > + domain1_opp_1: opp-1300000000 { > + opp-hz = /bits/ 64 <1300000000>; > + opp-microvolt = <1000000 980000 1010000>; > + }; > + }; > + > + power: power-controller@12340000 { > + compatible = "foo,power-controller"; > + reg = <0x12340000 0x1000>; > + #power-domain-cells = <1>; > + operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>; > + }; > + > + leaky-device0@12350000 { > + compatible = "foo,i-leak-current"; > + reg = <0x12350000 0x1000>; > + power-domains = <&power 0>; > + required-opps = <&domain0_opp_0>; > + }; > + > + leaky-device1@12350000 { > + compatible = "foo,i-leak-current"; > + reg = <0x12350000 0x1000>; > + power-domains = <&power 1>; > + required-opps = <&domain1_opp_1>; > + }; > diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml > new file mode 100644 > index 000000000000..dd1376cff51b > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/power-domain.yaml > @@ -0,0 +1,134 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/power-domain.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Generic PM domains > + > +maintainers: > + - Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> > + - Kevin Hilman <khilman@xxxxxxxxxx> > + - Ulf Hansson <ulf.hansson@xxxxxxxxxx> > + > +description: |+ > + System on chip designs are often divided into multiple PM domains that can be > + used for power gating of selected IP blocks for power saving by reduced leakage > + current. > + > + This device tree binding can be used to bind PM domain consumer devices with > + their PM domains provided by PM domain providers. A PM domain provider can be > + represented by any node in the device tree and can provide one or more PM > + domains. A consumer node can refer to the provider by a phandle and a set of > + phandle arguments (so called PM domain specifiers) of length specified by the > + \#power-domain-cells property in the PM domain provider node. > + > +properties: > + $nodename: > + pattern: "^(power-controller|power-domain)(@.*)?$" > + > + domain-idle-states: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: > + A phandle of an idle-state that shall be soaked into a generic domain > + power state. The idle state definitions are compatible with > + domain-idle-state specified in > + Documentation/devicetree/bindings/power/domain-idle-state.txt > + phandles that are not compatible with domain-idle-state will be ignored. > + The domain-idle-state property reflects the idle state of this PM domain > + and not the idle states of the devices or sub-domains in the PM domain. > + Devices and sub-domains have their own idle-states independent > + of the parent domain's idle states. In the absence of this property, > + the domain would be considered as capable of being powered-on > + or powered-off. > + > + operating-points-v2: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: > + Phandles to the OPP tables of power domains provided by a power domain > + provider. If the provider provides a single power domain only or all > + the power domains provided by the provider have identical OPP tables, > + then this shall contain a single phandle. Refer to ../opp/opp.txt > + for more information. > + > + "#power-domain-cells": > + description: > + Number of cells in a PM domain specifier. Typically 0 for nodes > + representing a single PM domain and 1 for nodes providing multiple PM > + domains (e.g. power controllers), but can be any value as specified > + by device tree binding documentation of particular provider. > + > + power-domains: > + description: > + A phandle and PM domain specifier as defined by bindings of the power > + controller specified by phandle. Some power domains might be powered > + from another power domain (or have other hardware specific > + dependencies). For representing such dependency a standard PM domain > + consumer binding is used. When provided, all domains created > + by the given provider should be subdomains of the domain specified > + by this binding. More details about power domain specifier are > + available in the power-domain-consumers.yaml. > + > +required: > + - "#power-domain-cells" > + > +examples: > + - | > + power: power-controller@12340000 { > + compatible = "foo,power-controller"; > + reg = <0x12340000 0x1000>; > + #power-domain-cells = <1>; > + }; > + > + // The node above defines a power controller that is a PM domain provider and > + // expects one cell as its phandle argument. > + > + - | > + parent2: power-controller@12340000 { > + compatible = "foo,power-controller"; > + reg = <0x12340000 0x1000>; > + #power-domain-cells = <1>; > + }; > + > + child2: power-controller@12341000 { > + compatible = "foo,power-controller"; > + reg = <0x12341000 0x1000>; > + power-domains = <&parent2 0>; > + #power-domain-cells = <1>; > + }; > + > + // The nodes above define two power controllers: 'parent' and 'child'. > + // Domains created by the 'child' power controller are subdomains of '0' power > + // domain provided by the 'parent' power controller. > + > + - | > + parent3: power-controller@12340000 { > + compatible = "foo,power-controller"; > + reg = <0x12340000 0x1000>; > + #power-domain-cells = <0>; > + domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>; > + }; > + > + child3: power-controller@12341000 { > + compatible = "foo,power-controller"; > + reg = <0x12341000 0x1000>; > + power-domains = <&parent3>; > + #power-domain-cells = <0>; > + domain-idle-states = <&DOMAIN_PWR_DN>; > + }; > + > + DOMAIN_RET: state@0 { > + compatible = "domain-idle-state"; > + reg = <0x0 0x0>; > + entry-latency-us = <1000>; > + exit-latency-us = <2000>; > + min-residency-us = <10000>; > + }; > + > + DOMAIN_PWR_DN: state@1 { > + compatible = "domain-idle-state"; > + reg = <0x1 0x0>; > + entry-latency-us = <5000>; > + exit-latency-us = <8000>; > + min-residency-us = <7000>; > + }; > diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt > deleted file mode 100644 > index 8f8b25a24b8f..000000000000 > --- a/Documentation/devicetree/bindings/power/power_domain.txt > +++ /dev/null > @@ -1,205 +0,0 @@ > -* Generic PM domains > - > -System on chip designs are often divided into multiple PM domains that can be > -used for power gating of selected IP blocks for power saving by reduced leakage > -current. > - > -This device tree binding can be used to bind PM domain consumer devices with > -their PM domains provided by PM domain providers. A PM domain provider can be > -represented by any node in the device tree and can provide one or more PM > -domains. A consumer node can refer to the provider by a phandle and a set of > -phandle arguments (so called PM domain specifiers) of length specified by the > -#power-domain-cells property in the PM domain provider node. > - > -==PM domain providers== > - > -Required properties: > - - #power-domain-cells : Number of cells in a PM domain specifier; > - Typically 0 for nodes representing a single PM domain and 1 for nodes > - providing multiple PM domains (e.g. power controllers), but can be any value > - as specified by device tree binding documentation of particular provider. > - > -Optional properties: > - - power-domains : A phandle and PM domain specifier as defined by bindings of > - the power controller specified by phandle. > - Some power domains might be powered from another power domain (or have > - other hardware specific dependencies). For representing such dependency > - a standard PM domain consumer binding is used. When provided, all domains > - created by the given provider should be subdomains of the domain > - specified by this binding. More details about power domain specifier are > - available in the next section. > - > -- domain-idle-states : A phandle of an idle-state that shall be soaked into a > - generic domain power state. The idle state definitions are > - compatible with domain-idle-state specified in [1]. phandles > - that are not compatible with domain-idle-state will be > - ignored. > - The domain-idle-state property reflects the idle state of this PM domain and > - not the idle states of the devices or sub-domains in the PM domain. Devices > - and sub-domains have their own idle-states independent of the parent > - domain's idle states. In the absence of this property, the domain would be > - considered as capable of being powered-on or powered-off. > - > -- operating-points-v2 : Phandles to the OPP tables of power domains provided by > - a power domain provider. If the provider provides a single power domain only > - or all the power domains provided by the provider have identical OPP tables, > - then this shall contain a single phandle. Refer to ../opp/opp.txt for more > - information. > - > -Example: > - > - power: power-controller@12340000 { > - compatible = "foo,power-controller"; > - reg = <0x12340000 0x1000>; > - #power-domain-cells = <1>; > - }; > - > -The node above defines a power controller that is a PM domain provider and > -expects one cell as its phandle argument. > - > -Example 2: > - > - parent: power-controller@12340000 { > - compatible = "foo,power-controller"; > - reg = <0x12340000 0x1000>; > - #power-domain-cells = <1>; > - }; > - > - child: power-controller@12341000 { > - compatible = "foo,power-controller"; > - reg = <0x12341000 0x1000>; > - power-domains = <&parent 0>; > - #power-domain-cells = <1>; > - }; > - > -The nodes above define two power controllers: 'parent' and 'child'. > -Domains created by the 'child' power controller are subdomains of '0' power > -domain provided by the 'parent' power controller. > - > -Example 3: > - parent: power-controller@12340000 { > - compatible = "foo,power-controller"; > - reg = <0x12340000 0x1000>; > - #power-domain-cells = <0>; > - domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>; > - }; > - > - child: power-controller@12341000 { > - compatible = "foo,power-controller"; > - reg = <0x12341000 0x1000>; > - power-domains = <&parent>; > - #power-domain-cells = <0>; > - domain-idle-states = <&DOMAIN_PWR_DN>; > - }; > - > - DOMAIN_RET: state@0 { > - compatible = "domain-idle-state"; > - reg = <0x0>; > - entry-latency-us = <1000>; > - exit-latency-us = <2000>; > - min-residency-us = <10000>; > - }; > - > - DOMAIN_PWR_DN: state@1 { > - compatible = "domain-idle-state"; > - reg = <0x1>; > - entry-latency-us = <5000>; > - exit-latency-us = <8000>; > - min-residency-us = <7000>; > - }; > - > -==PM domain consumers== > - > -Required properties: > - - power-domains : A list of PM domain specifiers, as defined by bindings of > - the power controller that is the PM domain provider. > - > -Optional properties: > - - power-domain-names : A list of power domain name strings sorted in the same > - order as the power-domains property. Consumers drivers will use > - power-domain-names to match power domains with power-domains > - specifiers. > - > -Example: > - > - leaky-device@12350000 { > - compatible = "foo,i-leak-current"; > - reg = <0x12350000 0x1000>; > - power-domains = <&power 0>; > - power-domain-names = "io"; > - }; > - > - leaky-device@12351000 { > - compatible = "foo,i-leak-current"; > - reg = <0x12351000 0x1000>; > - power-domains = <&power 0>, <&power 1> ; > - power-domain-names = "io", "clk"; > - }; > - > -The first example above defines a typical PM domain consumer device, which is > -located inside a PM domain with index 0 of a power controller represented by a > -node with the label "power". > -In the second example the consumer device are partitioned across two PM domains, > -the first with index 0 and the second with index 1, of a power controller that > -is represented by a node with the label "power". > - > -Optional properties: > -- required-opps: This contains phandle to an OPP node in another device's OPP > - table. It may contain an array of phandles, where each phandle points to an > - OPP of a different device. It should not contain multiple phandles to the OPP > - nodes in the same OPP table. This specifies the minimum required OPP of the > - device(s), whose OPP's phandle is present in this property, for the > - functioning of the current device at the current OPP (where this property is > - present). > - > -Example: > -- OPP table for domain provider that provides two domains. > - > - domain0_opp_table: opp-table0 { > - compatible = "operating-points-v2"; > - > - domain0_opp_0: opp-1000000000 { > - opp-hz = /bits/ 64 <1000000000>; > - opp-microvolt = <975000 970000 985000>; > - }; > - domain0_opp_1: opp-1100000000 { > - opp-hz = /bits/ 64 <1100000000>; > - opp-microvolt = <1000000 980000 1010000>; > - }; > - }; > - > - domain1_opp_table: opp-table1 { > - compatible = "operating-points-v2"; > - > - domain1_opp_0: opp-1200000000 { > - opp-hz = /bits/ 64 <1200000000>; > - opp-microvolt = <975000 970000 985000>; > - }; > - domain1_opp_1: opp-1300000000 { > - opp-hz = /bits/ 64 <1300000000>; > - opp-microvolt = <1000000 980000 1010000>; > - }; > - }; > - > - power: power-controller@12340000 { > - compatible = "foo,power-controller"; > - reg = <0x12340000 0x1000>; > - #power-domain-cells = <1>; > - operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>; > - }; > - > - leaky-device0@12350000 { > - compatible = "foo,i-leak-current"; > - reg = <0x12350000 0x1000>; > - power-domains = <&power 0>; > - required-opps = <&domain0_opp_0>; > - }; > - > - leaky-device1@12350000 { > - compatible = "foo,i-leak-current"; > - reg = <0x12350000 0x1000>; > - power-domains = <&power 1>; > - required-opps = <&domain1_opp_1>; > - }; > - > -[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt > diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt > index eb35b22f9e23..386eeed6a887 100644 > --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt > +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt > @@ -12,7 +12,7 @@ Required Properties: > - #power-domain-cells: number of cells in Power domain specifier > must be 1. > - operating-points-v2: Phandle to the OPP table for the Power domain. > - Refer to Documentation/devicetree/bindings/power/power_domain.txt > + Refer to Documentation/devicetree/bindings/power/power-domain-consumers.yaml > and Documentation/devicetree/bindings/opp/opp.txt for more details > > Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for > diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt > index eae2a880155a..8cd804980119 100644 > --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt > +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt > @@ -43,7 +43,7 @@ Example: > > Devices residing in a power area must refer to that power area, as documented > by the generic PM domain bindings in > -Documentation/devicetree/bindings/power/power_domain.txt. > +Documentation/devicetree/bindings/power/power-domain-consumers.yaml. > > Required properties: > - power-domains: A phandle and symbolic PM domain specifier, as defined in > diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt > index beda7d2efc30..49aba15dff8b 100644 > --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt > +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt > @@ -29,7 +29,7 @@ Optional nodes: > > Each of the PM domain nodes represents a PM domain, as documented by the > generic PM domain bindings in > -Documentation/devicetree/bindings/power/power_domain.txt. > +Documentation/devicetree/bindings/power/power-domain.yaml. > > The nodes should be named by the real power area names, and thus their names > should be unique. > diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt > index 8d1b8200ebd0..54b9f9d0f90f 100644 > --- a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt > +++ b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt > @@ -4,7 +4,7 @@ Device Tree Bindings for the Xilinx Zynq MPSoC PM domains > The binding for zynqmp-power-controller follow the common > generic PM domain binding[1]. > > -[1] Documentation/devicetree/bindings/power/power_domain.txt > +[1] Documentation/devicetree/bindings/power/power-domain.yaml > > == Zynq MPSoC Generic PM Domain Node == > > diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt > index 3b7d32956391..72ff033565e5 100644 > --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt > +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt > @@ -26,7 +26,7 @@ Optional properties: > system power. This node follows the power controller bindings[3]. > > [1] Documentation/devicetree/bindings/reset/reset.txt > -[2] Documentation/devicetree/bindings/power/power_domain.txt > +[2] Documentation/devicetree/bindings/power/power-domain.yaml > [3] Documentation/devicetree/bindings/power/power-controller.txt > > Example: > diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt > index 876693a7ada5..8f469d85833b 100644 > --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt > +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt > @@ -8,7 +8,7 @@ The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power > domain control. > > The driver implements the Generic PM domain bindings described in > -power/power_domain.txt. It provides the power domains defined in > +power/power-domain.yaml. It provides the power domains defined in > - include/dt-bindings/power/mt8173-power.h > - include/dt-bindings/power/mt6797-power.h > - include/dt-bindings/power/mt2701-power.h > diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt > index f541d1f776a2..6217e64309de 100644 > --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt > +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt > @@ -12,7 +12,7 @@ PM Domain Node > ============== > The PM domain node represents the global PM domain managed by the PMMC, which > in this case is the implementation as documented by the generic PM domain > -bindings in Documentation/devicetree/bindings/power/power_domain.txt. Because > +bindings in Documentation/devicetree/bindings/power/power-domain.yaml. Because > this relies on the TI SCI protocol to communicate with the PMMC it must be a > child of the pmmc node. > > diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt > index 5bfcc0b4d6b9..ee0d6c28978f 100644 > --- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt > +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt > @@ -64,12 +64,12 @@ For Tegra210: > For Tegra210 and Tegra186: > - power-domains: A list of PM domain specifiers that reference each power-domain > used by the xHCI controller. This list must comprise of a specifier for the > - XUSBA and XUSBC power-domains. See ../power/power_domain.txt and > + XUSBA and XUSBC power-domains. See ../power/power-domain-consumers.yaml and > ../arm/tegra/nvidia,tegra20-pmc.txt for details. > - power-domain-names: A list of names that represent each of the specifiers in > the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which > represent the power-domains XUSBA and XUSBC, respectively. See > - ../power/power_domain.txt for details. > + ../power/power-domain-consumers.yaml for details. > > Optional properties: > -------------------- > diff --git a/MAINTAINERS b/MAINTAINERS > index 296de2b51c83..a1a2237c1cc6 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6883,7 +6883,7 @@ L: linux-pm@xxxxxxxxxxxxxxx > S: Supported > F: drivers/base/power/domain*.c > F: include/linux/pm_domain.h > -F: Documentation/devicetree/bindings/power/power_domain.txt > +F: Documentation/devicetree/bindings/power/power-domain*.yaml > > GENERIC RESISTIVE TOUCHSCREEN ADC DRIVER > M: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
